TP-Link Auranet EAP110 Bedienungsanleitung

Quick Setup Guide

for Standalone Omada Access Points

EAP110 / EAP115 / EAP225 / EAP245 / EAP320 / EAP330 / EAP115-Wall

EAP110-Outdoor / EAP225-Outdoor / EAP225-Wall

1910012420 REV1.0.1

May 2018

Omada EAP products provide wireless coverage solutions for small-medium business

and households. There are two methods to login to manage your EAPs:

To configure and manage mass EAPs (usually more than three), you can use EAP

controller. For detailed instructions about how to use EAP Controller, visit

http://www.

tp-link.com/en/download/EAP-Controller.html

to download EAP Controller and its

User Guide.

To configure a few EAPs (usually less than three), you can directly use the

management interface of each EAP via a web browser. In such situation, the EAP is in

standalone mode.

This article introduces how to build a wireless network using a standalone EAP.

Follow the steps below:

Step1: Connecting the EAP Device to the network

Refer to the following topology and connect the EAP device to your network.

EAPPC

IP: 192.168.0.100

Router (DHCP Server)

LAN: 192.168.0.1 Internet

Clients

1. Connect your PC and EAP to the LAN ports of your router with Ethernet cables.

2. Set your router to make sure that the PC and EAP can get dynamic IP addresses from

the router and surf the internet.

Step2: Logging In to the EAP Device

There are two methods to log in to the EAP. You can choose one as you like:

Method 1:

and

Method 2: Log in via the IP Address of the EAP

Note: EAP320 and EAP330 are not currently available for login via domain name.

Method 1: Log In via the Domain Name

In this method, you needn’t know the IP address of the EAP, but you need to prepare a

wireless client device, such as a wireless laptop. Follow the steps below to log in to the

EAP wirelessly:

1. Set the wireless client device to get IP settings assigned automatically.

2. Search the default SSID (Network name) using your wireless client device and

connect to the wireless network of the EAP. The default SSID of the EAP is printed

on the product label at the bottom of the device. The dual-band EAP has two default

SSIDs named TP-LINK_2.4GHz_XXXXXX and TP-LINK_5GHz_XXXXXX on the

2.4GHz band and 5GHz band, and the single-band EAP has a default SSID named TP-

LINK_2.4GHz_XXXXXX on the 2.4GHz band.

3. Make sure that the wireless client has been assigned with the IP address and has got

the IP address of the DNS server and the gateway.

4. Launch a web browser on the client device and enter http://tplinkeap.net in the

address bar to load the login page of the EAP. Use admin for both of the username

and password to log in.

Tips:

If you cannot log in to the EAP via the domain name, try the operations below for

troubleshooting:

• Clear the browser cache or use anther browser to log in again.

• Go to the wireless setting of your wireless client device and turn off the Wi-Fi

button. Then turn it on and connect the network again. Or you can reboot the EAP

device.

• If you know the IP address of the EAP, you can login to the EAP via the IP address.

For the detailed steps, refer to

Method 2: Log in via the IP Address of the EAP

• If login still fails, reset the EAP device to its factory default settings and try again.

5. In the pop-up window, configure a new username and a new password for your user

account.

6. Use the new username and password to log in.

Method 2: Log in via the IP Address of the EAP

To log in to the EAP via the IP address of the EAP, you need to prepare an Ethernet cable

to connect your computer. Follow the steps below to log in via the IP address of the EAP:

1. Get the IP address of the EAP. There are two methods.

• Log in to the router which acts as the DHCP server. In the DHCP client list, find the

IP address of your EAP according to its MAC address. The MAC address can be

found at the bottom of the EAP.

• Go to

http://www.tp-link.com/en/download/EAP-Controller.html#EAP_Discovery_

Tool

to download EAP Discovery Utility. EAP Discovery Utility is a software that can

scan all EAPs in the same network segment. Install and launch EAP Discovery Utility

on the PC, and find the IP address of the EAP. In the following figure, the IP address

of the EAP is 192.168.0.5.

2. Launch a web browser and enter 192.168.0.5 in the address bar to load the login

page of the EAP. Use admin for both of the username and password to log in.

3. In the pop-up window, configure a new username and a new password for your user

account.

4. Use the new username and password to log in.

Tips:

The EAP is preset with a default IP 192.168.0.254, which you can use to log in to its web

management page. Follow the steps below:

1. Connect the EAP to your computer with an Ethernet Cable.

2. Assign a static IP address 192.168.0.X (X ranges between 2 and 253) together with

the subnet mask 255.255.255.0 to your computer.

3. Open a web browser and enter 192.168.0.254 in the address bar to load the login

page of the EAP.

4. Refer to

Step3: Configuring the EAP Device

to configure the SSID and password. You

can surf the internet after connecting your EAP to a LAN port of the router.

Step3: Configuring the EAP Device

After logging in to the EAP, we recommend that you change the SSID configuration

immediately for secure management purpose.

Follow the steps below to add a new SSID:

1. Go to the Wireless > Wireless Settings page. If your EAP is a dual-band device, click

to choose a frequency band on which the new SSID will be created.

In the SSIDs section, click to create a new SSID on the chosen band.

2. Set a network name and select the security mode. For security, we recommend

that you choose WPA-PSK and customize your own password. You can keep other

parameters as default. Click OK.

Note:

• You can click in the Modify column of the SSID entry to edit the SSID. For network

security, we recommend that you delete or edit the default SSIDs. By default, anyone

can access the network without authentication because the default SSID has no

password.

• The configurations for editing the SSID will take effect immediately. So you should

reconnect to the wireless network of the EAP.

• For more detailed configurations, visit

https://www.tp-link.com/us/support/

download the User Guide of EAP in the download center.

After all the steps above are completed, you can enjoy the internet via the EAP.

Specifications are subject to change without notice. is a registered trademark

of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or

registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used

to make any derivative such as translation, transformation, or adaptation without

Andere Handbücher für Auranet EAP110

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TP-Link Drahtloser Zugangspunkt Handbücher

TP-Link

TP-Link Auranet EAP115 Bedienungsanleitung

TP-Link

TP-Link AURANET CAP300-Outdoor Bedienungsanleitung

TP-Link

TP-Link Deco Bedienungsanleitung

TP-Link

TP-Link TL-WA5210G Bedienungsanleitung

TP-Link

TP-Link Auranet EAP120 Bedienungsanleitung

TP-Link

TP-Link Auranet EAP320 Bedienungsanleitung

TP-Link

TP-Link Deco M1300 Bedienungsanleitung

TP-Link

TP-Link Auranet EAP115 Bedienungsanleitung

TP-Link

TP-Link Pharos CPE210 Bedienungsanleitung

TP-Link

TP-Link CAP2200 Bedienungsanleitung

TP-Link

TP-Link TL-WA901ND Bedienungsanleitung

TP-Link

TP-Link TL-WA1801 Bedienungsanleitung

TP-Link

TP-Link Auranet EAP320 Bedienungsanleitung

TP-Link

TP-Link Auranet EAP225 Bedienungsanleitung

TP-Link

TP-Link Auranet EAP120 Bedienungsanleitung

TP-Link

TP-Link AP8635-I Bedienungsanleitung

TP-Link

TP-Link Omada EAP Series Bedienungsanleitung

TP-Link

TP-Link Omada EAP660 HD V1 Bedienungsanleitung

TP-Link

TP-Link Omada Pro Bedienungsanleitung

TP-Link

TP-Link TL-WA901N Bedienungsanleitung

TP-Link

TP-Link omada EAP110-Outdoor Bedienungsanleitung

TP-Link

TP-Link Auranet EAP115-Wall Bedienungsanleitung

TP-Link

TP-Link TL-WA701ND Bedienungsanleitung

TP-Link

TP-Link TL-WA5210G Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung