Travis Industries 430 GSR2 Bedienungsanleitung



430 GSR2 Driftwood Log Set

Installation Instructions (SKU94500946)



Page 1 of 18 17601812.docx — 10/11/13 © Travis Industries, Inc.

WARNINGS:

•Make sure the gas control valve is OFF and the heater is cool prior to conducting service.

•Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with

this appliance may result in property damage or personal injury.

•If using propane (LP), convert the appliance before installing the logs (see the owners manual for details).

Compatibility

•430 GSR2

Packing List

15-Piece Log/Stone Set

Rear Log

Right Ember Chunk

Left Rear Twig

#14 Stone

Left Twig

Right Log

Left Log

Right Twig

#11 Stone

#4 Stone

#9 Stone

Left Cross Twig

Right Cross Twig

Front Ember Chunk

Left Ember

Chunk



430 GSR2 Driftwood Log Set

Installation Instructions (SKU94500946)



Page 2 of 18 17601812.docx — 10/11/13 © Travis Industries, Inc.

Steel Components

Fasteners, Embers, Rock Wool

•(4) 10-24 Keps Nuts

•Large Ember Bag (use ½ bag for installation)

•Rock Wool 

Rear Log Support

LP Air Deflector

! Notch !

NG Air Deflector

Mid-Left Log Support

Front-Left Log Support Front-Right Log Support

Mid-Right Log Support



430 GSR2 Driftwood Log Set

Installation Instructions (SKU94500946)



Page 3 of 18 17601812.docx — 10/11/13 © Travis Industries, Inc.

Preparing the Burner / Firebox

NOTE: The insert should be in place, with the gas line and vent attached and the firebacks installed (see owner’s manual

for further details).

1. Remove the rear burner (1/4” nutdriver).

2. Remove the 3 screws from the back of the rear burner (1/4” nutdriver).

3. Attach the rear air deflector (NG or LP – see page 1 for details) to the rear burner with the screws removed earlier.

Removethisscrew.



430 GSR2 Driftwood Log Set

Installation Instructions (SKU94500946)



Page 4 of 18 17601812.docx — 10/11/13 © Travis Industries, Inc.

4. Before replacing the rear burner, remove the upper screw from the rear leveling bolt cover plates (1/4” nutdriver). These

screws are used to secure the rear log support.

5. Replace the rear burner and secure with the screw removed earlier. Note how the two tabs on the rear burner fit over

the front burner.

6. Position the rear log shelf so the two holes on the shelf fit over the two holes exposed in step 4 (rear leveling bolt cover

plates).



430 GSR2 Driftwood Log Set

Installation Instructions (SKU94500946)



Page 5 of 18 17601812.docx — 10/11/13 © Travis Industries, Inc.

7. Secure the rear log shelf with the screws removed in step 4.

HINT: Use a magnetic-tipped nutdriver to secure these screws (this prevents screws falling below burner).

8. Place the mid-left log support over the stud on the left side mid-burner.

9. Secure the mid-left log support to the stud using one of the included nuts (3/8” nutdriver).



430 GSR2 Driftwood Log Set

Installation Instructions (SKU94500946)



Page 6 of 18 17601812.docx — 10/11/13 © Travis Industries, Inc.

10. Place the mid-right log support over the stud on the right side of the mid-burner.

11. Secure the mid-right log support to the stud using one of the included nuts (3/8” nutdriver).

12. Place the front-left log support over the stud on the left side of the front burner.



430 GSR2 Driftwood Log Set

Installation Instructions (SKU94500946)



Page 7 of 18 17601812.docx — 10/11/13 © Travis Industries, Inc.

13. Secure the front-left log support to the stud using one of the included nuts (3/8” nutdriver).

14. Place the front-right log support over the stud on the right side of the front burner.

15. Secure the front-right log support to the stud using one of the included nuts (3/8” nutdriver).



430 GSR2 Driftwood Log Set

Installation Instructions (SKU94500946)



Page 8 of 18 17601812.docx — 10/11/13 © Travis Industries, Inc.

Log, Stone, Ember, and Rock Wool Placement

The logs are fragile, especially after being exposed to heat.

The burner must be correctly positioned before installing the logs. Make sure the burner is fully

seated and screwed in place.

1. Place the rear log on the rear log support. Note how the two posts on the support insert into the slots on the bottom of

the log.

NG Installations

Move the rear log forward (the log has slots that allow

slight log movement).

LP Installations

Move the rear log back (the log has slots that allow slight

log movement).



430 GSR2 Driftwood Log Set

Installation Instructions (SKU94500946)



Page 9 of 18 17601812.docx — 10/11/13 © Travis Industries, Inc.

2. Place the left ember chunk. Note how the slot on the chunk fits over the tab on the log support.

3. Place the right ember chunk. Note how the slot on the chunk fits over the tab on the log support.



430 GSR2 Driftwood Log Set

Installation Instructions (SKU94500946)



Page 10 of 18 17601812.docx — 10/11/13 © Travis Industries, Inc.

4. Place the #14 stone as shown below (the number is printed on the back of the stone). Note how the slot on the stone

fits over the tab on the log support. The printed number on the stone faces the rear of the firebox.

5. Place the #11 stone as shown below (the number is printed on the back of the stone). Note how the slot on the stone

fits over the tab on the log support. The printed number on the stone faces the rear of the firebox.

Andere Handbücher für 430 GSR2

Andere Travis Industries Kamin im Innenbereich Handbücher

Travis Industries

Travis Industries 564 HO Bedienungsanleitung

Travis Industries

Travis Industries 21 TRV GreenSmart Bedienungsanleitung

Travis Industries

Travis Industries DVS Insert EF II Bedienungsanleitung

Travis Industries

Travis Industries 864 TRV Bedienungsanleitung

Travis Industries

Travis Industries 864 TRV Bedienungsanleitung

Travis Industries

Travis Industries 36 CF ST Bedienungsanleitung

Travis Industries

Travis Industries Revolution 36CF Bedienungsanleitung

Travis Industries

Travis Industries 864 HO GS Bedienungsanleitung

Travis Industries

Travis Industries DVL Insert EF II Bedienungsanleitung

Travis Industries

Travis Industries 564 SS Deluxe Bedienungsanleitung

Travis Industries

Travis Industries 564 DF GSR2 Bedienungsanleitung

Travis Industries

Travis Industries DVS GSR2 NB Insert Bedienungsanleitung

Travis Industries

Travis Industries Interior Bedienungsanleitung

Travis Industries

Travis Industries 864 HO NB GSR2 Bedienungsanleitung

Travis Industries

Travis Industries 864 HH Bedienungsanleitung

Travis Industries

Travis Industries 430 Bedienungsanleitung

Travis Industries

Travis Industries 21E Bedienungsanleitung

Travis Industries

Travis Industries 1250 Insert Bedienungsanleitung

Travis Industries

Travis Industries 864 HO GS Bedienungsanleitung

Travis Industries

Travis Industries GreenSmart Fireplace 564 SS Bedienungsanleitung

Travis Industries

Travis Industries 616 GSR Bedienungsanleitung

Travis Industries

Travis Industries 864 TRV GS2 Bedienungsanleitung

Travis Industries

Travis Industries 564 Clean Face GSR2 Bedienungsanleitung

Travis Industries

Travis Industries 864 TRV Bedienungsanleitung

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch