TRENDnet TU2-ET100 Bedienungsanleitung

- i -

Table of Contents

1. Introduction..........................................................................................................1

Features.............................................................................................................................1

Package Contents ..............................................................................................................1

System Requirements........................................................................................................1

LED Status..........................................................................................................................2

2. Installation in Windows .........................................................................................3

Windows 7/ Vista ..............................................................................................................3

Windows XP ......................................................................................................................5

Verifying the Driver Installation in Windows...................................................................7

TCP/IP Setting in Windows................................................................................................8

3. Installation in Mac ...............................................................................................13

Mac 10.6x........................................................................................................................13

Mac 10.5x........................................................................................................................16

Mac 10.4.x.......................................................................................................................19

Verifying the Driver Installation on Mac .........................................................................21

TCP/IP Setting in Mac ......................................................................................................22

4. Specifications ......................................................................................................28

Limited Warranty ....................................................................................................29

1. Introduction

The TU2-ET100 is a high speed USB network adapter that allows you to instantly connect

to a 10/100Mbps network from a USB enabled desktop or Notebook PC. Compliant

with USB 2.0 and backwards compatible with the USB 1.0 and 1.1, you can share files

and printers and also gain access to broadband Internet to explore valuable resources on

the web.

Features

Compliant with USB 2.0 and 1.1 specifications

Compliant with IEEE 802.3 and 802.3u standards

Supports both full-duplex and half-duplex operations

Supports Suspend mode and Hibernate mode to remote wake-up through link-up or

magic packet

Compliant with Windows 7/ Vista/ XP or Mac OS X 10.4~10.6

Powered by USB port. No external power adapter required

Diagnostic LEDs

Plug & Play for easy installation

Package Contents

Before installation, please check the items of the package. The package should contain the

following items:

TU2-ET100

Multi-Language Quick Installation Guide

CD-ROM(Driver & User’s Guide)

System Requirements

CPU: 300MHZ or above

Memory: 256MB RAM or above

Computer with an available USB 1.1 or 2.0 Port

Windows7 (32/64-bit) / Vista (32/64-bit) / XP (32/64-bit)

Mac OS X 10.4 ~ 10.6

LED Status

LED

Color

Description

100Mbps

Green

On for 100Mbps

Off for 10Mbps or not connected

Link

Amber

LAN activity. Blinking when there is data flow between LAN and the

host computer.

2. Installation in Windows

Windows 7/ Vista

1. Insert the Driver CD-ROM into your CD-ROM Drive.

2. Click Run Install.exe.

3. Click Install Driver to install the driver.

4. Click Next.

5. Click Install.

6. Click Finish.

7. Remove the CD-ROM from your computer’s CD-ROM drive.

8. Connect the adapter to an available USB port on your computer

9. The adapter’s drivers will install automatically.

10. Connect a network cable from the TU2-ET100 to a switch, router or cable/DSL

modem.

Windows XP

1. Insert the Driver CD-ROM into your CD-ROM Drive.

2. Click Install Driver to install the driver.

3. Click Next.

4. Click Install.

5. Click Finish.

6. Remove the CD-ROM from your computer’s CD-ROM drive.

7. Connect the adapter to an available USB port on your computer

8. The adapter’s drivers will install automatically.

9. Connect a network cable from the TU2-ET100 to a switch, router or cable/DSL

modem.

Verifying the Driver Installation in Windows

To verify the driver installation on your Ethernet adapter, please launch Device Manager

through the steps below.

On Windows® 7/Vista: Right-click on the Computer icon on the desktop and select Properties > Device

Manager.

On Windows® XP: Right-click on the My Computer icon on the desktop and select Properties > System >

(Hardware) > Device Manager.

TCP/IP Setting in Windows

1. Click Start, Control Panel and, then click Network and Sharing Center, and then clicking Change Adapter

settings

2. Right-click on the Local Area Connection of the adapter, and then click Properties.

3. Under Networking tab, click Internet Protocol Version 4 (TCP/IPv4) for IPv4 setting or Internet Protocol

Version 6 (TCP/IPv6) for IPv6 setting, and then click Properties.

Andere Handbücher für TU2-ET100

Inhaltsverzeichnis

Andere TRENDnet Adapter Handbücher

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

TRENDnet

TRENDnet TEW-649UB - Mini Wireless N Speed USB 2.0... Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCISXplus Bedienungsanleitung

TRENDnet

TRENDnet TE100-ECFX Bedienungsanleitung

TRENDnet

TRENDnet TEW-646UBH Bedienungsanleitung

TRENDnet

TRENDnet TEW-424UBK Bedienungsanleitung

TRENDnet

TRENDnet TEW-648UB - 150Mbps Mini Wireless N USB 2.0... Bedienungsanleitung

TRENDnet

TRENDnet TEW-648UB - 150Mbps Mini Wireless N USB 2.0... Bedienungsanleitung

TRENDnet

TRENDnet TEW-AMBA - Bedienungsanleitung

TRENDnet

TRENDnet TU-ET100C - Bedienungsanleitung

TRENDnet

TRENDnet TU2-ET100 Bedienungsanleitung

TRENDnet

TRENDnet TU-PS2 Bedienungsanleitung

TRENDnet

TRENDnet TBW-104UB Bedienungsanleitung

TRENDnet

TRENDnet TEW-301PC Bedienungsanleitung

TRENDnet

TRENDnet TPL-405E Bedienungsanleitung

TRENDnet

TRENDnet TUC-HDMI(V1) Bedienungsanleitung

TRENDnet

TRENDnet TPL-406E2K Bedienungsanleitung

TRENDnet

TRENDnet TU-ET100C - Bedienungsanleitung

TRENDnet

TRENDnet TEW-604UB Bedienungsanleitung

TRENDnet

TRENDnet TU-ET100plus Bedienungsanleitung

TRENDnet

TRENDnet TU2-ET100 Bedienungsanleitung

TRENDnet

TRENDnet TEW-649UB - Mini Wireless N Speed USB 2.0... Bedienungsanleitung

TRENDnet

TRENDnet TU-S9 Bedienungsanleitung

TRENDnet

TRENDnet TPL-406E V1.0R Installations- und Betriebshandbuch

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung