TRENDnet TV-IP420P Bedienungsanleitung

TV-IP420P(V1)

Quick Installation Guide

Table of Content

1 English

1. Before You Start

2. Hardware Installation and Configuration

1. Before You Start

Package Contents

ŸTV-IP420P

ŸCD-ROM (Utility and User's Guide)

ŸQuick Installation Guide

ŸMounting kit

Minimum Requirements

ŸPower over Ethernet (PoE) switch (e.g. TPE-TG80g) or PoE Injector (e.g. TPE-113GI)

ŸA networked computer and web browser

ŸWired network

ŸNetwork cable

Note:

ŸThe TV-IP420P only works with Power over Ethernet (PoE) devices that follow the IEEE

802.3af standard.

ŸThe TV-IP420P has a 5.5 mm barrel connector for an optional 12 V DC 1A power adapter.

ŸOptional Power Supply (not included).

TRENDnetVIEW Pro Requirements

Supported Operating

Systems

1-8 Cameras

CPU CPU

9-32 Cameras

Memory Memory

Windows 10/

Windows 8.1/

Windows 8 /

Windows 7/

Windows Server 2008/ 2012

2 GHz 2 GHz2 GB RAM

or above

4 GB RAM

or above

2. Hardware Installation and Configuration

1. Do not install or mount the IP camera until after you complete the installation steps below.

Temporarily place the IP camera next to your computer.

2. Insert the CD-ROM into your CD-ROM drive.

3. Select language from the drop down menu.

4. Click Install Camera.

5. Write down the MAC address of your camera. Then click Next.

7. Select your camera. Click Next and follow the instructions.

6. Connect a network cable from the camera's network port to your PoE source. Allow 60 seconds

for the camera to boot up. Then click Next.

8. Select DHCP option to assign an IP by DHCP server, select “Fixed IP” to set IP address

manually. Click Next.

9. If you select “Fixed IP”, fill out the IP address, subnet mask, default gateway, and DNS server.

Please ensure that the IP address of the camera and the computer must be within the same

network. Click Next.

10. Select Change Password. Enter a new password, confirm the new password and then click

Next.

12. Congratulations! Your camera is now ready to be installed in its final location. Scan the QR

code to download a free mobile app to view the camera from your mobile device. Click Finish

to exit the installation wizard.

11. Initial Setup is complete! Your camera is now connected to your network. Click the hyperlink

to confirm access to the management page. This will open up a web browser. To resume

installation, minimize the web browser and then click Next.

Finish

13. To manage multiple cameras and for more advanced features, please install the

TRENDnetVIEW Pro software. Install the software by clicking Install TRENDnetVIEW Pro

Software in the Autorun window and refer to the TRENDnetVIEW Pro User's Guide on the CD

for more information.

Note

ŸSee User's Guide for advanced management functions

ŸTwo User's Guides are included – one for the camera and one for the complimentary

management software.

Using the TV-IP420P with a PoE switch (TPE-TG80g)

ŸConnect a network cable from the Power over Ethernet switch (e.g. TPE-TG80g) to the

network port on the IP Camera.

ŸConnect the switch to your network.

TPE-TG80g

PoE

Internet

TV-IP-420P

14. Install the camera in your desired location. To connect the IP camera to your network with

PoE, please use either of the following examples:

Non-PoE

TPE-113GI

DATA

PWR+DATA

OUT

Non-PoE

PoE

ŸConnect the power adapter to the TPE-113GI and then to a power outlet.

ŸConnect a network cable from the TV-IP420P to the TPE-113GI's PWR+DATA OUT (PoE)

port.

ŸConnect a network cable from a switch or router (e.g. TEW-818DRU) to the TPE-113GI's

DATA IN (Non-PoE) port.

Using the TV-IP420P with an Injector (TPE-113GI)

TV-IP-420P

Internet

Andere Handbücher für TV-IP420P

Inhaltsverzeichnis

Andere TRENDnet IP-Kamera Handbücher

TRENDnet

TRENDnet TV-IP512WN - ProView Wireless N Internet Surveillance... Bedienungsanleitung

TRENDnet

TRENDnet TV-IP200 Bedienungsanleitung

TRENDnet

TRENDnet TV-IP200 Bedienungsanleitung

TRENDnet

TRENDnet TV-IP600 Bedienungsanleitung

TRENDnet

TRENDnet TV-IP672W Bedienungsanleitung

TRENDnet

TRENDnet TV-IP562WI Bedienungsanleitung

TRENDnet

TRENDnet TV-IP600W - Wireless Pan/Tilt/Zoom Internet Camera Server... Bedienungsanleitung

TRENDnet

TRENDnet TV-IP262P Bedienungsanleitung

TRENDnet

TRENDnet TV-IP121WN Bedienungsanleitung

TRENDnet

TRENDnet TV-IP672W Bedienungsanleitung

TRENDnet

TRENDnet TV-IP212 - Internet Camera Server Bedienungsanleitung

TRENDnet

TRENDnet TV-IP762IC Merkblatt

TRENDnet

TRENDnet TV-IP422WN Bedienungsanleitung

TRENDnet

TRENDnet TV-IP602WN Bedienungsanleitung

TRENDnet

TRENDnet TV-IP600 Bedienungsanleitung

TRENDnet

TRENDnet TV-IP212 - Internet Camera Server Bedienungsanleitung

TRENDnet

TRENDnet TV-IP262P Bedienungsanleitung

TRENDnet

TRENDnet TV-IP121WN Bedienungsanleitung

TRENDnet

TRENDnet TV-IP572W Bedienungsanleitung

TRENDnet

TRENDnet TV-IP572P Bedienungsanleitung

TRENDnet

TRENDnet TV-IP572P Bedienungsanleitung

TRENDnet

TRENDnet TV-IP572PI Bedienungsanleitung

TRENDnet

TRENDnet TV-IP572WI Bedienungsanleitung

TRENDnet

TRENDnet TV-IP121WN Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung