TRENDnet TV-IP343PI Bedienungsanleitung
TV-IP343PI
ŸOutdoor 2MP Full HD PoE Day/Night Network Camera
ŸQuick Installation Guide (1)
TV-IP343PI (V1) /05.22.2014
1. Before You Start
1
Package Contents
ŸTV-IP343PI
ŸCD-ROM (Utility and User's Guide)
ŸMulti-Language Quick Installation Guide
ŸMounting kit
ŸPower adapter (12 V DC, 1A)
Minimum Requirements
ŸPower over Ethernet (PoE) switch (e.g. TPE-S44) or PoE Injector (e.g. TPE-103I optional)
ŸA computer with an Ethernet port and web browser
ŸCD-ROM Drive
ŸWired network
ŸNetwork cable
Note: The TV-IP343PI works with Power over Ethernet (PoE) devices that follow the IEEE
802.3af standard.
Supported Operating
Systems
1-8 Cameras
CPU CPU
9-32 Cameras
Memory Memory
Windows 8.1 /
Windows 8 /
Windows 7 /
Windows Server 2008 /
Windows Vista /
Windows Server 2003 /
Windows XP
2GHz 2GHz2GB RAM
or above
4GB RAM
or above
Free Management Software: TRENDnetVIEW Pro Requirements
Supported Operating Systems
Android (version 2.3.3 or above)
iOS (version 5.1.1 or above)
Free Mobile App: TRENDnetVIEW Pro Requirements
2
2. Hardware Installation and Configuration
1. Do not install or mount the IP camera until after you complete the installation steps below.
Temporarily place the IP camera next to your computer.
2. Insert the Utility CD-ROM into your CD-ROM drive.
3. Select language from the drop down menu.
4. Click Install Camera.
5. Write down the MAC address of your camera. Then click Next.
Note: To download the latest version of the Autorun installation software, please go to
http://www.trendnet.com/support.
6. Plug in and connect the power adapter to the camera. The IR LEDs will turn on and show a dim
visible red light. Allow 60 seconds for the camera to boot up.
3
7. Connect a network cable to the camera's network port and then to your PoE Switch. Then click
Next.
8. Select your camera. Click Next and follow the instructions.
9. Enter a new password, confirm the new password and then click Next.
4
10. Initial Setup is complete! Your camera is now connected to your network. Click the hyperlink
to confirm access to the management page. This will open up a web browser. To resume
installation, minimize the web browser and then click Next.
11. Congratulations! Your camera is now ready to be installed in its final location. Scan the QR
code to download a free mobile app to view the camera from your mobile device. Click Finish
to exit the installation wizard.
Note
ŸSee User's Guide for advanced management functions
ŸTwo User's Guides are included – one for the camera and one for the complementary
management software.
ŸWhen viewing live video, you may be required to install plug-ins.
ŸIt is recommended that you setup a dynamic DNS service in order to view your cameras
remotely. See your router's manual and the camera product how-tos for instructions.
12. To manage multiple cameras and for more advanced features, please install the
TRENDnetVIEW Pro software. Install the software by clicking Install TRENDnetVIEW Pro in
the Autorun window and refer to the TRENDnetVIEW Pro User's Guide on the CD for more
information.
5
Using the TV-IP343PI with a PoE switch (TPE-S44)
ŸConnect the provided network cable from the Power over Ethernet switch (e.g. TPE-S44) to
the network port on the IP Camera.
ŸConnect the switch to your network.
13. Install the camera in the desired location. To connect the IP camera to your network with PoE,
please use one of the following methods:
TPE-S44
PoE
Internet
6
Using the TV-IP343PI with an Injector (TPE-103I)
ŸConnect the power adapter to the TPE-103I and then to a power outlet.
ŸConnect a network cable from the TV-IP343PI to the TPE-103I's PWR+DATA OUT (PoE)
port.
ŸConnect a network cable from a switch or router (e.g. TEW-818DRU) to the TPE-103I's DATA
IN (Non-PoE) port.
TV-IP343PI
TPE-103I
PoE
Non-PoE
Internet
7
Note: For tips on capturing appropriate camera viewing angle, please refer to the user's guide.
Mounting the camera
1. Loosen the adjustable nut and manually position the camera as desired.
2. Place the provided template label on the wall or ceiling.
3. Drill holes at each marked position on the template. Make sure the drill bit matches the size of
the holes on the template.
4. Insert the provided screw anchors into the holes.
Ceiling Mounting
Hole
HoleHole
5. Insert the cables through the hole in the wall or ceiling.
8
7. Manually adjust the zoom and focus. Using the free app, confirm the zoom and focus matches
installation requirements.
Zoom
Focus
6. Align the mounting bracket with the screw anchors, and then use the provided screws to
secure the camera to the mounting surface.
Company Information:
Company Name:
TRENDnet, Inc.
Company Address:
20675 Manhattan Place
Torrance, CA 90501
USA
Product Information:
Product Description:
Outdoor 2MP Full HD PoE Day/Night Network Camera
Model Number:
TV-IP343PI
Brand Name:
TRENDnet
Technical Standards:
EN 55022: 2010 Class A
EN 61000-3-2: 2006 + A1: 2009 + A2: 2009
EN 61000-3-3: 2008
EN 50130-4: 2011
EN 60950-1: 2006+ A11: 2009 + A1: 2010 + A12: 2011
Declaration:
I hereby declare that the products and devices mentioned above are consistent with the
standards and provisions of the guidelines.
This product is herewith confirmed to comply with the Directive of 2004/108/EC and
2006/95/EC.
Sonny Su
Name
Date
Director of Technology
Title
Signature
May 13, 2014
Andere Handbücher für TV-IP343PI
1
Inhaltsverzeichnis
Andere TRENDnet Sicherheitskamera Handbücher
TRENDnet
TRENDnet TV?IP450PI Bedienungsanleitung
TRENDnet
TRENDnet TV-IP1315PI Bedienungsanleitung
TRENDnet
TRENDnet TV-IP110WN Bedienungsanleitung
TRENDnet
TRENDnet TV-H400 Bedienungsanleitung
TRENDnet
TRENDnet TV-IP301W Bedienungsanleitung
TRENDnet
TRENDnet TV-IP602WN Bedienungsanleitung
TRENDnet
TRENDnet TV-IP422WN Bedienungsanleitung
TRENDnet
TRENDnet TV-IR500 Bedienungsanleitung
TRENDnet
TRENDnet TV-IP100-N Bedienungsanleitung
TRENDnet
TRENDnet TV-IP328PI Bedienungsanleitung
TRENDnet
TRENDnet TV-IP410 - Pan/Tilt Internet Camera Server... Bedienungsanleitung
TRENDnet
TRENDnet TV-IP262PI Bedienungsanleitung
TRENDnet
TRENDnet SecurView TV-M7110WK Bedienungsanleitung
TRENDnet
TRENDnet TV-IP110 - SecurView Internet Surveillance... Bedienungsanleitung
TRENDnet
TRENDnet TV-IP400W - Wireless Advanced Pan Bedienungsanleitung
TRENDnet
TRENDnet TV-IP551W Bedienungsanleitung
TRENDnet
TRENDnet TV-IP252P - SecurView PoE Dome Internet Camera... Bedienungsanleitung
TRENDnet
TRENDnet TV-IP314PI Bedienungsanleitung
TRENDnet
TRENDnet TV-IP252P - SecurView PoE Dome Internet Camera... Bedienungsanleitung
TRENDnet
TRENDnet TV-IP410PI V1 Bedienungsanleitung
