TRENDnet TEW-311BRP Bedienungsanleitung

Before You Begin

1. If you purchased this router to share your high-speed Internet connection with

other computers, you must have either an Ethernet-based Cable Modem or a DSL

Modem with an established Internet account from an Internet Service Provider

(ISP).

2. It’s best to use the same computer that is connected to your modem for

configuring the TEW-311BRP Wireless Router. The TEW-311BRP acts as a

DHCP server and will assign all the necessary IP address information on your

network. See Appendix at the end of this Quick Installation Guide or the Manual

on the CD-ROM for setting each network adapter to automatically obtain an IP

address.

Package Contents

These are the items included with your TEW-311BRP:

If any of the above items are missing, please contact your reseller.

This product can be set up using any current web browser

, i.e.,

Internet Explorer 5.x or above, Netscape Navigator 4.x or above.

• TEW

311BRP Wir

eless Broadband Router

• CD-ROM (containing Manual and Warranty)

• Ethernet (CAT5 UTP/Straight-Through) Cable

• 5V DC, 2.5A Power Adapter

Warning!

Using a power supply with a different voltage rating will damage

and void the warranty for this product.

TEW-311BRP

Wireless Internet Router

Quick Installation Guide

1. Connecting The TEW-311BRP Wireless

Router To Your Network

A. First, connect the power adapter to the receptor on the back panel of

the TEW-311BRP and then plug the other end of the power adapter to

a wall outlet or power strip. The Power LED on the front panel will turn

ON (green).

B. Insert one end of an Ethernet cable to the WAN port on the back

panel of the TEW-311BRP and the other end to the Ethernet port

located on your Cable or DSL modem. The Link/Act of the WAN LED

lights will illuminate (green) to indicate proper connection.

C. Connect the Ethernet cable to LAN port 1 on the back panel of the

TEW-311BRP and the Ethernet port on the network adapter in the

computer you are using to configure the TEW-311BRP. The Link/Act

LED light for LAN Port 1 will illuminate (green) to indicate proper

connection. (Note: Some computers already have network adapters

pre-installed.)

D. Computers equipped with 802.11b (or equivalent) wireless adapters

will be able to connect to the TEW-311BRP. The TEW-301PC

Wireless CardBus Adapter and the TEW-303PI Wireless PCI Adapter

will be able to connect, out of the box, with this router using their

default wireless settings (ESSID: default, No WEP).

Reset Button

Press and hold this button for 6

seconds and then release it to

restore the router’s settings to

original factory default settings.

Receptor

for

Power Adapter

WAN Port

This is the connection

for the Ethernet Cable

to Ethernet Port on the

Cable or DSL Modem.

LAN Ports

These are 10/100Mbps

connections for Ethernet

cables to your Ethernet-

enabled computers/devices.

4 ports are available.

Antennas

2. Check Computer’s TCP/IP Setting

After making the connections described in Step 1, please check computer’s

TCP/IP setting and make sure it is set at Obtain IP Address automatically.

For Windows XP

For Windows 2000

Go to

Start

right-click

My Network Places

select Properties > double-click on the Local Area Connection

associated with the network adapter > select Properties >select Internet

Protocol (TCP/IP) >click Properties

Click

Obtain an IP address automatically

Click

Obtain DNS server address automatically

Click OK

Go to

Start

Settings

Network and Dial

up Connections

> Double click

on the Local Area Connection associated with the network adapter >

select

Properties

> select

Internet Protocol (TCP/IP)

> click

Properties

Click

Obtain an IP address automatically

Click

Obtain DNS server address automatically

Click OK

For Windows 98/ME

3. Connecting Additional Computers To

The TEW-311BRP Wireless Router

Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-

equipped computers to the remaining Ethernet LAN ports on the back panel of

the TEW-311BRP.

When you have completed the steps in this Quick Installation Guide, your

connected network should look similar to this:

Go to

Start

Settings

Control Panel

> Double-click on the

Networ

associated with the TEW-301PC > click Properties > select Internet

Protocol

(TCP/IP)

> click

Properties

Click

Obtain an IP address automatically

Select

Detect connection to

network media.

Click OK

4. Configuration using The Setup Wizard

The logon pop-up

screen appears.

Open your Web

Browser and type

http://192.168.1.1

into

the URL address box.

Then press the Enter

Return

key.

Type

admin

for the

User name and

admin for Password.

Click OK

admin

After logging in the

configuration, the “Welcome

to Router Setup Wizard”

appears on top of the

configuration page.

Note: If you are familiar with

the setup process, you can

close the wizard window.

Step 1 - Set Password: You

have the option to setup a new

password. The Password can

be up to 15 characters long.

Input the desired password in

Password field and then

repeats the same password in

Verify Password field.

Step 2 - Choose Time Zone:

Click on the dropdown arrow and

select the time zone of your

location

Click

to go to

Step 1

and setup a new login

password

Click Next

If you don’t want the Wizard

to pop up when you open the

configuration page, click on

No and click on update.

Click Exit to close the Wizard.

Step 4 – Select Internet

Connection Type:

If the Auto Detecting WAN

did not

select the correct Internet

Connection Type, click to select

one of these settings.

Warning!

If you are unsure

of which setting to select,

please contact your Internet

Service Provider.

Click Next

Obtain IP automatically (DHCP client)

–

Usually for cable modem connections.

Some Internet Service Providers (ISP) use network adapter’s MAC address to monitor

user’s account. If this is the case, you will need to report the Router’s WAN port MAC

address to your ISP or you can change the WAN port MAC address to match your

network adapter card’s MAC address. To do this, please click on Main from the menu

at the screen’s left hand side, click on WAN from the menu bar on the top, at

Connection Type select DHCP Client or Fixed IP, input the desired address at the

MAC address field, and click Apply to save the changes.

Step 3

–

Set LAN & DHCP

Server: It is not necessary to

change these settings. If you

change and save the IP

Address/DHCP Server settings,

please keep in mind that you

may need to also change the

computer’s TCP/IP settings.

You will not be able to configure

the router if computer’s IP

address range is different from

router’s IP range.

Click

After clicking

in Step 3, the Router stars

Auto

Detecting WAN

connection type. This may take a few seconds.

PPPoE to Obtain IP

automatically – Usually this is

for xDSL modem that requires

running PPPoE s

oftware to logon

the Internet.

Enter the User Name,

Password, retype the password

again in Verify Password, and

click Next.

Note: After you have configured

the router for PPPoE, please

remove the PPPoE software on

the computers in the network.

Fixed IP

address

–

select this

when you have a

Fixed IP

address from your ISP, enter it in

the WAN IP Address field. Your

ISP would also provide you

Subnet Mask, Gateway, and

DNS

Server Addresses, enter them in

the correspondent fields.

(Note: if you only have one DNS

Server Address, input it in DNS

Server Address 1 and input 0.0.0.0

in DNS Server Address 2 and 3.

Click Next

PPPoE wit

h a fixed IP

address

– For login with PPPoE and a

fixed IP address.

Enter the User Name,

Password, retype the password

again in Verify Password, input

the IP address (from ISP), and

click Next.

Note: After you have configured

the router for PPPoE, please

remove the PPPoE software on

the computers in the network.

Note: User Name and Password can be up

to 63 characters.

Step 5

Set Wireless LAN

Connection:

For security purpose, if you don’t

have any wireless stations in the

network, you can Disable router’s

Wireless LAN function.

ESSID (Wireless Network Name):

Input the ESSID of your wireless

LAN.

Channel

: Click on the drop-down arrow and select the desired Channel.

Note: All wireless devices in the same network need to have the same

ESSID and Channel. This router also acts Wireless Access Point, wireless

stations in Infrastructure mode with same ESSID will automatically switch

to the router’s channel and connect to the router.

WEP (Encryption) is disabled at default. After finishing the Wizard setup,

from the menu on the browser’s left hand side, you can click on Wireless,

click on WEP from the Menu Bar on top, and configure the WEP.

PPTP Client

– For xDSL modem

Enter the IP addresses, PPTP

Account

and password provided

by your ISP.

Note: After you have configured

the router for PPTP, please

remove the PPTP software on the

computers in the network.

Click

Step 6

–

Setup Completed:

Click

Restart

Click

This will close the

wizard windows.

Andere Handbücher für TEW-311BRP

Inhaltsverzeichnis

Andere TRENDnet WLAN-Router Handbücher

TRENDnet

TRENDnet TEW-432BRP - Wireless Router Bedienungsanleitung

TRENDnet

TRENDnet TEW-712BR Bedienungsanleitung

TRENDnet

TRENDnet TPL-111BR - WIRELESS POWERLINE ROUTER 125 Bedienungsanleitung

TRENDnet

TRENDnet TEW-714TRU Bedienungsanleitung

TRENDnet

TRENDnet TEW-657BRM Bedienungsanleitung

TRENDnet

TRENDnet TEW-432BRP - Wireless Router Bedienungsanleitung

TRENDnet

TRENDnet TEW-511BRP Bedienungsanleitung

TRENDnet

TRENDnet TEW-651BR Bedienungsanleitung

TRENDnet

TRENDnet TEW-692GR Bedienungsanleitung

TRENDnet

TRENDnet TEW-638PAP Betriebsanleitung

TRENDnet

TRENDnet TEW-737HRE Bedienungsanleitung

TRENDnet

TRENDnet TEW-631BRP Bedienungsanleitung

TRENDnet

TRENDnet TEW-638AP Bedienungsanleitung

TRENDnet

TRENDnet TEW-431BRP Bedienungsanleitung

TRENDnet

TRENDnet AC750 Bedienungsanleitung

TRENDnet

TRENDnet TEW-824DRU Bedienungsanleitung

TRENDnet

TRENDnet GREENnet TEW-639GR Bedienungsanleitung

TRENDnet

TRENDnet TEW-672GR Bedienungsanleitung

TRENDnet

TRENDnet TEW-731BR Bedienungsanleitung

TRENDnet

TRENDnet TEW-691GR Bedienungsanleitung

TRENDnet

TRENDnet TEW-211BRP Bedienungsanleitung

TRENDnet

TRENDnet TEW-431BRP Bedienerhandbuch

TRENDnet

TRENDnet TEW-435BRM - 54MBPS 802.11G Adsl Firewall M Bedienungsanleitung

TRENDnet

TRENDnet TEW-611BRP Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung