True Z6 Series Bedienungsanleitung
Z6 Series
Treadmill
Owner’s Manual
Manual/Pre-Program/Heart Rate Control
In 1981, Frank
Trulaske launched
True Fitness
Technology, Inc.
and began
manufacturing
hand-crafted
treadmills.
His team's
obsession
with quality
has
propelled
True to the
top of the industry and has
created one of America’s
oldest, largest and most
respected treadmill
manufacturers. True’s
200,000 square foot facility,
just outside St. Louis,
Missouri, houses the
manufacturing plant,
engineering laboratory and
testing facility.
Over the years, True has
designed, developed and
fabricated new and
cutting-edge components
for their complete
residential and commercial
treadmill line, including
innovative frame and
suspension systems.
Intensive quality
control standards
guarantee
excellence in
every phase of
production,
resulting in the
finest treadmills
available
in the
market-
place.
True
treadmills
are consistently rated
#1 for their smooth,
quiet and comfortable
performance. Today,
True is the choice for
workouts among
beginners, rehab
patients and top
athletes world-wide.
Thank You For Selecting A True Treadmill
Our original goal was to build the
world’s best treadmills, and today
we believe we’re doing it!”
-Frank Trulaske
NOTE: The serial number
must remain intact for
the warranty to remain
valid. Please check your
serial #ID to verify it has
not been tampered with,
removed or altered.
Table of Contents
Safety Instructions 1-2
Setting Up Your Treadmill 3-4
Assembly 5-6
Treadbelt Adjustment 7-8
Control Panel Functions 9
Basic Treadmill Operation 10-11
Quick Reference Operating Instr. 12
Manual Operation 13
Programmed Workouts 14-15
User Programs 16
Heart Rate Control (workouts) 17-20
Cruise Control 21-22
Important Points About Heart
Rate Control 23-24
The F.I.T. Formula 25-29
Beginning Your Exercise Program 30-32
Care and Maintenance 33-34
Troubleshooting Guide 35
Diagnostics 36-37
Safety Instructions
1
Important Safety Instructions
When using this treadmill, basic precautions should always
be followed, including the following:
Read all instructions before using this treadmill.
Consult your physician before beginning any exercise
program.
Danger: To reduce the risk of electric shock, always unplug
this treadmill immediately after use and before cleaning.
Warning: to reduce the risk of burns, fire and electric shock
and injury to persons:
This treadmill should never be left unattended when plugged
in. Unplug it from the outlet when not in use and before any
service is performed.
Close supervision is necessary when this treadmill is being
used by or near children, invalids, or disabled persons.
Use this treadmill only for its intended use as described in
this manual.
Do not use attachments not recommended by the
manufacturer.
Never operate this treadmill if it has a damaged power cord
or plug, if it is not working properly, if it has been damaged
or dropped, or if it has been submerged in water. In these
cases, the treadmill should be examined by a qualified service
technician.
Use a dedicated 110 volt, alternating current (AC), 15 amp
three-prong grounded outlet.
Safety Instructions
2
Keep the power cord away from heated surfaces.
Never drop or insert any object into any opening.
To disconnect, turn the power switch to the OFF position,
then remove the plug from the outlet.
Do not allow animals on or near your treadmill.
Make sure the power cord has enough slack to allow the
treadmill to raise freely without being limited by the cord or
caught in the incline rack. Do not run the power cord under
treadmill.
Use the treadmill indoors only.
Never use your treadmill near water or while wet. Using the
treadmill around a pool, hot tub or sauna will void the
warranty.
Do not operate where aerosol (spray) products are being used
or where oxygen is being administered.
Allow only trained personnel to service this equipment.
Keep the area under the treadmill free from obstruction, as
the deck will return to 0% grade when the safety key is
placed on console.
Avoid the possibility of bystanders being struck or caught
between moving parts by making sure that they are out of
reach of the treadmill while it is in motion.
Keep the space behind and on both sides of the treadmill
clear should you lose your balance.
Setting Up Your Treadmill
3
Allow only one person at a time on your machine.
Do not operate treadmill without the safety key attached to
the console and the lanyard clipped to your clothing at
approximately waist height.
Always straddle the treadbelt and allow the belt to begin
moving before stepping onto the belt.
Use extreme caution when stepping onto moving tread belt.
Some programs begin at speeds as high as 4.8 mph.
Gradually slow down the belt before stopping. This will
minimize the sensation of movement after you stop.
When making treadbelt adjustments, keep fingers, loose
clothing, jewelry, and long hair away from moving parts.
Setting Up Your Treadmill
Place your treadmill on a clean, level surface. Make sure the
electrical cord easily reaches a grounded three-pronged outlet
and has enough slack to allow the deck to incline without
tightening the cord. Do not allow the treadmill assembly to
rest on the cord.
Although your treadmill is designed to operate on most
carpeted surfaces, some deeply padded or heavy shag carpets
can cause damage. To prevent damage to your treadmill or
carpet, have someone stand on the deck and make sure the
treadmill belt doesn’t touch the carpet at any point.
Your treadmill is designed for indoor use only. Always keep
the control panel out of direct sunlight.
Setting Up Your Treadmill
4
Important Electrical Requirements
Your True treadmill requires a dedicated 110 volt,
alternating current (AC), 15 amp grounded outlet circuit.
This means nothing else can be plugged into the same power
circuit. Most power circuits are rated for this 110VAC 15-amp
requirement, but you must ensure the
treadmill does not share the circuit with anything else.
Danger: Do not use an extension cord or an ungrounded
outlet. The ground helps prevent electrical damage to your
treadmill and enhances your safety by preventing shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the treadmill is properly grounded. Do
not modify the plug provided with the treadmill – if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician.
A grounded outlet is critical for the Heart Rate Control
system to function properly.
Assembly
Hardware Kit:
1. Safety key
2. 5mm T-handle hex key
3. 5mm hex key/Philips screwdriver
4. 3mm hex key
5. 2mm hex key
6. 8mm x 15mm hex screws (4)
7. 8mm x 50mm hex screws (2)
8. 6mm x 15mm hex screws (4)
9. handrail clamps (2)
Step 1: Carefully unpack treadmill and check that all
hardware is present as shown.
Step 2: Remove motor cover by taking out the six screws
with Philips screwdriver.
Step 3: The upper wiring harness is tucked into the bottom
of the right pedestal leg. Lay the pedestal on the treadmill as
shown on page 6.
Assembly
5
Detach the rubber band from the upper wiring harness and
route the cable down the pedestal leg support and out the
bottom hole as shown.
Step 4: Tilt the pedestal up and slide it down the pedestal
supports, being careful not to pull out the upper wiring
harness. Plug the upper wiring harness into the motor
controller. Install the four 5mm x 15mm screws into the
pedestal legs.
Assembly
6
Treadbelt Adjustment
7
Do not tighten any pedestal or handrail screws until
instructed.
Step 5: The proper side of each handrail is designated by a
label. Install the handrails by sliding over the handrail stub
next to the handlebar. Install two 2mm x 15mm screws at the
top of each handrail. Install one 8mm x 50mm screw through
the handrail clamp and into the bottom of the handrail as
shown. Tighten all pedestal and handrail screws.
Step 6: Reinstall the motor cover using the Philips
screwdriver. Place the safety key on the circle labeled Safety
Key on the console.
Treadbelt Adjustment
Your treadmill’s running belt has been properly aligned at
the factory. However, when the treadmill is used on an
uneven surface, please follow these instructions:
Inhaltsverzeichnis
Andere True Tretmühle Handbücher
True
True CS200 Bedienungsanleitung
True
True PS900 Bedienungsanleitung
True
True CS800 Bedienungsanleitung
True
True ST1000 Bedienungsanleitung
True
True TC650 Bedienungsanleitung
True
True PS900 Bedienungsanleitung
True
True CS8.0 Bedienungsanleitung
True
True CS500 Bedienungsanleitung
True
True Z5.4 Bedienungsanleitung
True
True ZTX 825HRC Bedienungsanleitung
True
True CS800 Bedienungsanleitung
True
True LC1100 Bedienungsanleitung
True
True CS400 Bedienungsanleitung
True
True TC900 Bedienungsanleitung
True
True CS900 Bedienungsanleitung
True
True PS100 Bedienungsanleitung
True
True TPS800-5 Bedienungsanleitung
True
True TC400 Bedienungsanleitung
True
True M30 Bedienungsanleitung
True
True M50 Bedienungsanleitung
Beliebte Tretmühle Handbücher anderer Marken
Smooth Fitness
Smooth Fitness EVO 3i Bedienungsanleitung
NordicTrack
NordicTrack NETL81810.0 Bedienungsanleitung
Schwinn
Schwinn 830/Journey 8.0 Bedienungsanleitung
Keys Fitness
Keys Fitness HealthTrainer HT-740T Bedienungsanleitung
Spirit
Spirit XT8 Bedienungsanleitung
NordicTrack
NordicTrack T 14.0 Treadmill Bedienungsanleitung