Turning Technologies MOBIVIEW Bedienungsanleitung

WorkSpace PC for New Users 1

WORKSPACE PC FOR NEW USERS

Before Class

Charging the MobiView

The MobiView should arrive partially charged and ready to be installed. Turning Technologies recommends that MobiView and

its digital pen are both fully charged prior to use in the classroom.

1Carefully remove the plastic tab from the digital pen and place the pen in the recharging pen holder.

2Remove the MultiHub from the back of the MobiView. For convenience, store the MultiHub in the holder on the

charging stand.

3Place the MobiView on the charging stand.

4Plug the USB cable into the power adapter and plug into the wall outlet. Allow approximately eight (8) hours to fully

charge the battery.

Alternatively, the MobiView can be charged by connecting the device to a computer via USB cable. Allow

approximately 12 hours to fully charge the battery if using this method.

TIP

You can use the MobiView while it is charging.

Using the Digital Pen

1Rest your hand on the MobiView. Do not touch the digital pen to the MobiView's surface; i.e. hold the digital pen as you

would a stylus.

2Turn the digital pen's "rocker" buttons away from your fingers.

3Single-tap the digital pen to the MobiView. This is equivalent to a left-click with a mouse.

Double-tap the digital pen to the MobiView. This is equivalent to a double left-click with a mouse.

Alternatively, use the digital pen's rocker buttons to make left-clicks and double left-clicks.

Pairing the MobiView with the MultiHub

The MobiView communicates with Turning Technologies software via the MultiHub. The MultiHub is a USB device stored in

the charging stand or on the back of the MobiView.

IMPORTANT

MobiView is compatible with the following software:

lWorkSpace

lFlow

MobiView is NOT compatible with Insight360™.

turningtechnologies.com/training-support

WorkSpace PC for New Users 2

The MobiView is paired with the MultiHub at the factory. This pairing is confirmed the first time the MobiView is turned on. The

first time the MobiView is turned on, it attempts to connect automatically with the MultiHub. If the MobiView cannot connect to

the MultiHub, the device can be paired manually.

How to pair the MobiVew with the MultiHub...

1Turn on the computer on which WorkSpace or Flow is installed.

2Insert the MultiHub into a working USB port on the computer.

NOTE

If a USB hub is needed, you must use a powered USB hub.

3Turn on the MobiView by pressing the blue Power button on top of the unit.

The message Attempting to Connect is displayed on the MobiView screen.

The Home Screen appears when the MobiView connects to the MultiHub.

TIP

If the message, Unable to Connect… is displayed, confirm the MultiHub has been inserted into a

working USB port. Unplug the MultiHub and reinsert it into a different USB port.

How to manually pair the MobiView with the MultiHub...

You can manually pair the MobiView with the MultiHub if they do not automatically pair or if the MultiHub has been replaced

with a new one.

1Turn on the computer on which WorkSpace or Flow is installed.

2Insert the MultiHub into a working USB port on the computer.

3Turn on the MobiView by pressing the blue Power button on top of the unit.

The message Attempting to Connect is displayed on the MobiView screen.

4When the message, Unable to connect… is displayed, press the blue pairing button on the MultiHub.

5While the blue pairing button is flashing, tap Continue on the MobiView screen.

Downloading and Installing WorkSpace

WorkSpace can be installed from a disc, www.turningtechnologies.com/responsesystemsupport/downloads or from a direct

setup file.

1Insert the WorkSpace disc into the CD-ROM drive.

2Double-click Setup.exe.

The WorkSpace Software window is displayed.

3Click Install Software.

4Select the appropriate language from the drop-down menu and click OK.

The InstallShield Wizard opens.

5Click Next.

6Select the I accept the terms in the license agreement radio button if you agree to the End User License Agreement

(EULA).

7Click Next.

8Select Complete and click Next.

turningtechnologies.com/training-support

WorkSpace PC for New Users 3

9Click Install.

10 Click Finish.

11 Restart your computer before using WorkSpace.

During Class

Toolbar

Minimizing and Expanding the Toolbar

1To minimize the toolbar, click the icon.

2To expand the toolbar, click the icon. Optionally, click and drag the perimeter of the toolbar to change its shape.

Lesson Mode vs. Mouse Mode

Lesson Mode is the primary operational mode of WorkSpace. In Lesson Mode, participants can view the presentation while

you interact with your computer or other projection surface such as DualBoardTM.

Lesson Mode has two functional modes:

Annotation Mode

In Annotation Mode, the Annotation Tools allow you to write and draw on the Blank Page. The Page Tools create additional

pages and the Multimedia Tools add a variety of multimedia files to the pages in the presentation file.

Mouse Mode

Mouse Mode allows you to select and start applications and perform all the functions you would typically perform with the

mouse and keyboard. The Mouse Mode cursor on the Toolbar is unavailable while in Mouse Mode.

TIP

Use the Previous Page or Next Page icons to toggle from mode to mode.

turningtechnologies.com/training-support

WorkSpace PC for New Users 4

Accessing Lesson Mode

WorkSpace opens in Lesson Mode, however Lesson Mode can be accessed from the WorkSpace Toolbar at any time while in

any other mode.

1Click the Lesson Mode icon.

If you were in another mode, you will be prompted to save the current document. WorkSpace takes a full-screen

capture.

WorkSpace will remain in Lesson Mode until you select a different mode.

Enabling Mouse Mode

The Mouse Mode icon is unavailable until the Blank Page icon, Shapes icon or one of the writing tool icons is selected.

1Open WorkSpace.

2Click the Blank Page icon or one of the writing tool icons to annotate over the desktop.

The Mouse Mode icon becomes active.

3Click the Mouse Mode icon.

You can now access your mouse.

4Click any of the available tools from the toolbar to annotate over a screenshot of the desktop.

5Click the Mouse Mode icon to access your mouse.

Preferences

WorkSpace can be customized from the Preferences window.

To access the Preferences window, click the WorkSpace Main Menu icon and select Preferences.

The following tabs are available:

lOptions

lNew Page Setup

lTransparency and Language

lToolbar Settings

lCustomize Toolbar

lGradient Page Setup

lTablet Settings

Click the Options tab to define basic preferences such as window sizing and automatically save pages.

Click the New Page Setup tab to set page preferences such as background color and line color/width.

Click the Transparency and Language tab to select the software language and imported picture background color.

Click the Toolbar Settings tab to adjust the Toolbar Button Options.

Set the shape and size of the toolbar buttons.

turningtechnologies.com/training-support

WorkSpace PC for New Users 5

lBy default, the shape of the toolbar icons is Classic Rectangle. The toolbar icon shape can be changed to barrel, circle

or pentagon. Each selection is displayed in the Preview box.

lThe toolbar icons can be sized at either 22 x 22 pixels or 40 x 40 pixels.

Click the Customize Toolbar tab to select the toolbar scheme.

Toolbar Scheme Description

Basic Basic set of commonly used tools

Intermediate (Default) Includes the most commonly used pens and setup options on the toolbar

Advanced Includes more graphically oriented options on the toolbar

Click the Gradient Page Setup tab to apply gradients to Blank Pages.

Click the Tablet Settings tab to configure the WorkSpace Connect app.

Pen Tools

Listed below are some of the most common and frequently used WorkSpace pen tools.

Tool Use

Freehand Text Pen Convert handwritten text into typed text and insert the typed text into a blank page or an active

application, such as Excel, PowerPoint, Word (in Office Mode).

Freehand Shape Pen Convert an object drawn freehand, such as a rectangle, into a true rectangle with 90 degree

corners and straight perimeter lines with the Freehand Shape tool.

Freehand Equation Pen

Convert any written numeric characters into typed text.

Clear Delete the selected object or objects. If nothing is selected on the page, the Clear tool deletes

everything on the page.

Annotations, Page Sorter and Screen Capture

Using the Page Sorter

The Page Sorter provides thumbnail previews of the pages in your presentation.

turningtechnologies.com/training-support

WorkSpace PC for New Users 6

1From the main toolbar, click the Page Sorter icon.

2Within the Page Sorter, you can:

lRearrange a page by dragging and dropping it into a new position.

lDelete a page by selecting it and clicking the Recycle Bin icon.

lCreate a duplicate page by selecting a page, clicking the Page Sorter Menu icon and selecting Create

Duplicate Page.

TIP

Click the Page Sorter Menu icon to view other editing options.

3Click the Xin the upper-right corner of the window to close the Page Sorter.

Using Screen Capture

A capture is a screenshot of either the full screen, a selected window or a selected portion of the screen. The available capture

options differ based on your selected WorkSpace mode.

In Lesson Mode, the Capture dialog appears as:

In Mouse Mode, the Capture dialog appears as:

1From the main toolbar, click the Capture icon.

The Capture window opens.

2Select an area to capture.

3Optionally, select Place capture in new page.

Saving Annotations

By default, a WorkSpace file is dated, time-stamped and saved to the following location: Documents\Interwrite WorkSpace.

turningtechnologies.com/training-support

WorkSpace PC for New Users 7

1Click the Main Menu icon.

2Mouse over File and select Save or Save As.

The Save File window opens.

lIf Save, the file is saved as a GWB file and can only be opened in WorkSpace.

lIf Save As, the file can be saved as a GWB file or an IWB file (Common File Format).

Gallery

The WorkSpace Gallery tool provides more than 4000 resources to supplement your lesson planning. The Gallery stores

images, background pages, teaching tools and Flash content called Interwrite Sims.

The WorkSpace Content component must be installed prior to using the Gallery. If you have not installed it, visit

www.turningtechnologies.com/responsesystemsupport/downloads.

Before using the Gallery for the first time, you will be prompted to build the Gallery. Click Yes to build the Gallery database.

Searching the Gallery

Search for content by file name, keyword, media type or subject.

How to search the Gallery by file name...

1Click the Search box and enter the search criteria.

2Click the Search icon or press the Enter key.

How to perform an advanced search...

1Click the Advanced Search tab.

The Advanced Search tab opens.

2In the Media Type window, select the type of file(s) from the list.

3In the Search For field, enter the keyword(s).

4Click the Search icon or press the Enter key.

The results are displayed in the bottom pane of the Gallery.

Adding a File to Favorites

Save frequently used files to the Favorites tab.

1Select the file to be saved.

2Click Favorites and select Add to Favorites.

The file is added to the Favorites tab for future use.

turningtechnologies.com/training-support

WorkSpace PC for New Users 8

Using Sims

1Click the Blank Page icon.

2Click the Gallery icon.

If the Gallery icon is not on your toolbar, click the Main Menu icon, mouse over Tools and select Gallery.

3Select the Content tab in the Gallery window.

4Open the Sims Flash Objects folder.

aSelect a topic.

bSelect a Flash object.

cDrag the object onto the blank page or right-click and add to Favorites.

MobiView

Writing a Note

The Note function allows you to create and save up to 20 private notes or post public notes to share with your class.

1Tap Notes.

The Notepad opens.

2Tap the Pen button and tap a color choice for the pen.

aOptionally, adjust the thickness of the pen line by tapping the white dots.

bOptionally, tap the icon NEXT to the plus sign to change the background color of the note. The color change is

only visible on the projector.

3Write the note directly on the touchscreen or the MobiView’s active writing area.

Notes are automatically saved in the MobiView. Use the arrow buttons to navigate between notes.

4To post a note, tap the Post button. The note will be posted to the current WorkSpace page.

lTo add a note, tap the Plus button.

lTo delete a note, tap the Trash button.

Using the Keyboard

The mobile keyboard can be used to enter characters into field or type web addresses. There are two ways to use the

keyboard:

How to use the keyboard in Mouse Mode (outside of WorkSpace)...

1Tap Keyboard.

The keyboard opens.

2Use the pen tip to enter characters on the MobiView keyboard.

How to use the keyboard in Lesson Mode (PC, Mac or Linux) or Annotate Over Desktop Mode (PC Only)...

turningtechnologies.com/training-support

WorkSpace PC for New Users 9

1Tap Keyboard.

The keyboard opens.

2Use the pen tip to enter characters on the MobiView keyboard.

The Type Text window and On-screen Keyboard appear on the desktop.

3Click the pen once to the MobiView touchscreen to add text.

4Tap Exit to close the keyboard.

Annotating Content

Access WorkSpace tools to annotate content and collaborate with multiple users from anywhere in the classroom. The tools

displayed on the Annotate screen can be customized.

TIP

Refer to the WorkSpace for PC User Guide or WorkSpace for Java User Guide for help using

WorkSpace.

How to annotate content...

1WorkSpace opens in Lesson Mode upon selecting an annotation tool. Tap the Pen icon on the WorkSpace toolbar.

2Write on the MobiView’s active area to annotate the current screen or tap the Blank Page icon on the WorkSpace

toolbar to annotate on a new page.

lUse the WorkSpace toolbar tools and the WorkSpace Properties Bar to adjust the pen options.

How to customize the WorkSpace tools on the MobiView...

1Tap Annotate.

2Tap Customize Tools.

Device Manager opens on your computer.

3Select a function row.

4Select the desired tool from the MobiView WorkSpace Annotation Tools drop-down menu.

5Click OK.

turningtechnologies.com/training-support

Andere Handbücher für MOBIVIEW

Inhaltsverzeichnis

Andere Turning Technologies Whiteboard Handbücher

Turning Technologies

Turning Technologies Touch Board Bedienungsanleitung

Beliebte Whiteboard Handbücher anderer Marken

Copernicus

Copernicus RC105 Bedienungsanleitung

IKEA

IKEA MALA 104.889.67 Bedienungsanleitung

SMART

SMART SBX800 Bedienungsanleitung

SMART

SMART Board MX V3 Series Bedienungsanleitung

funtronic

funtronic EasyBoard Bedienungsanleitung

Best-Rite

Best-Rite Baby Folding Wheasel 784-T Bedienungsanleitung

Best-Rite

Best-Rite Modular Room Divider Bedienungsanleitung

IKEA

IKEA MALA 504.565.92 Bedienungsanleitung

Panasonic

Panasonic TX-47P800HQ TX-47P800HZ Bedienungsanleitung

SMART

SMART ST442i Bedienungsanleitung

Quartet

Quartet QRT-72981 Bedienungsanleitung

SMART

SMART Smart Board 480 Bedienungsanleitung

EGAN

EGAN GlassWrite TableScreen TSG Bedienungsanleitung

Claridge

Claridge Edify Mobile Bedienungsanleitung

Legamaster

Legamaster e-Board Touch 2 Bedienungsanleitung

Nureva

Nureva WALL Bedienungsanleitung

Best-Rite

Best-Rite Black Splash Bedienungsanleitung

Da-Lite

Da-Lite Cosmopolitan Electrol Bedienungsanleitung