Ubiquiti ER-8-XG Bedienungsanleitung

EdgeRouter Mounting Brackets (Qty. 2) Bracket Screws (Qty. 8)

Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Power Cords (Qty. 2)

Rubber Feet (Qty. 4)

Package Contents

Installation Requirements

Phillips screwdriver (for rack- or wall-mounting)

Standard-sized, 19" wide rack with a minimum of 1U height available (for rack-mounting)

For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.

For outdoor applications, shielded Category 5 (or above) cabling should be used for all

wired Ethernet connections and should be grounded through the AC ground of the power

supply.

We recommend that you protect your networks from harmful outdoor environments and

destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For

more details, visit:

ui.com/toughcable

Note:

Although the cabling can be located outdoors, the EdgeRouter itself should be

ER-8-XG Quick Start Guide

Click for

Table of Contents

System LED

SFP Link/Act LED (Ports eth1-8)

RJ45 Link/Act LED (Port eth0)

housed inside a protective enclosure.

Hardware Overview

Note:

The System LED functionality has been updated with rmware v1.10.8. We

recommend that you update the EdgeRouter to the latest rmware.

Flashing White Bootup in progress.

White Ready for use, not connected to Ubiquiti® Network

Management System (UNMS™).

Blue Ready for use, connected to UNMS.

Steady Blue with Occasional

Flashing Ready for use, unable to connect to UNMS, check

connection to UNMS server.

Quickly Flashing Blue Used to locate a device in UNMS.

Alternating

Blue/White Firmware upgrade in progress.

Oﬀ No Link

White Link Established

Flashing Indicates Activity

Oﬀ No Link

ER-8-XG Quick Start Guide

Click for

Table of Contents

microSD

USB

Console

SFP+ (Ports eth1-8)

RJ45 (Port eth0)

Reset Button

PSU Power Ports

Green Link Established

Flashing Indicates Activity

Reserved for future use.

RJ45 serial console port for Command Line Interface (CLI) management.

Hot-swappable SFP+ ports support 10 Gbps connections.

RJ45 port supports 10/100/1000 Ethernet connections.

Click here

to learn how to reset an EdgeRouter to factory defaults.

Two AC/DC 100W power supplies are included. You also have the option to use a DC/DC

PowerModule™, model RPS-DC-100W (sold separately).

Hardware Installation

ER-8-XG Quick Start Guide

Click for

Table of Contents



ER-8-XG Quick Start Guide

Click for

Table of Contents

ER-8-XG Quick Start Guide

Click for

Table of Contents

ER-8-XG Quick Start Guide

Click for

Table of Contents

Connecting SFP+

ER-8-XG Quick Start Guide

Click for

Table of Contents

For information about compatible ber SFP modules, visit:

ubnt.link/SFP_DAC_Compatibility

Accessing the EdgeOS Conguration Interface

The EdgeOS® conguration interface can be accessed via DHCP or static IP address

assignment. By default, eth1 is set up as a DHCP client, while eth0 is assigned a static IP

address of 192.168.1.1. To congure the EdgeRouter, proceed to the appropriate section:

DHCP or

“Static IP Address”

DHCP

1. Connect a cable from eth1 on the EdgeRouter to a LAN segment that has an existing DHCP

server.

ER-8-XG Quick Start Guide

Click for

Table of Contents

2. To check the IP address of the EdgeRouter, use one of the following methods:

Set up the DHCP server to provide a specic IP address to the EdgeRouter based on its

MAC address (on the label).

Let the EdgeRouter obtain an IP address and then check the DHCP server to see which

IP address was assigned.

3. Launch your web browser. Enter the appropriate IP address in the address eld. Press enter

(PC) or return (Mac).

4. Enter ubnt in the Username and Password elds. Read the Ubiquiti License Agreement,

and check the box next to I agree to the terms of this License Agreement to accept it. Click

The EdgeOS Conguration Interface will appear, allowing you to customize your settings as

needed. For more information, refer to the EdgeOS User Guide, which is available at

ui.com/download/edgemax

Static IP Address

ER-8-XG Quick Start Guide

Click for

Table of Contents

1. Connect an Ethernet cable from the Ethernet port of your computer to the port labeled

eth0 on the EdgeRouter.

2. Congure the Ethernet adapter on your host system with a static IP address on the

192.168.1.x subnet.

3. Launch your web browser. Type https://192.168.1.1 in the address eld. Press enter (PC) or

return (Mac).

4. Enter ubnt in the Username and Password elds. Read the Ubiquiti License Agreement,

and check the box next to I agree to the terms of this License Agreement to accept it. Click

The EdgeOS Conguration Interface will appear, allowing you to customize your settings as

needed. For more information, refer to the EdgeOS User Guide, which is available at

ER-8-XG Quick Start Guide

Click for

Table of Contents

Andere Handbücher für ER-8-XG

Andere Ubiquiti Drahtloser Zugangspunkt Handbücher

Ubiquiti

Ubiquiti UAP Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-IW-HD Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Switch Flex Mini Bedienungsanleitung

Ubiquiti

Ubiquiti NBE-5AC-Gen2 Bedienungsanleitung

Ubiquiti

Ubiquiti AmpliFi MeshPoint HD Bedienungsanleitung

Ubiquiti

Ubiquiti PrismStation 5AC Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Ubiquiti

Ubiquiti PowerStation2 Bedienungsanleitung

Ubiquiti

Ubiquiti M900 Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBeam NBE2ACN Bedienungsanleitung

Ubiquiti

Ubiquiti LTU-Lite Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-IW-HD Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-IW Bedienungsanleitung

Ubiquiti

Ubiquiti LTU-Pro Bedienungsanleitung

Ubiquiti

Ubiquiti airFiber AF-11 Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation M2 Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation M2 Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket R5ACL Bedienungsanleitung

Ubiquiti

Ubiquiti Uni-fi AP Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBridge M5 Bedienungsanleitung

Ubiquiti

Ubiquiti GigaBeam GBE Bedienungsanleitung

Ubiquiti

Ubiquiti NBE-M5-16 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung