Ubiquiti NanoStationM Series Bedienungsanleitung

NanoStationM/locoM Series Quick Start Guide

https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]

NanoStationM2/M3/M365/M5 Zip Tie PoE (24V, 0.5A) with Mounting

Bracket

Power Cord

NanoStationlocoM2/M5 Zip Tie PoE (24V, 0.5A) with Mounting

Bracket

Package Contents

NSM2/NSM3/NSM365/NSM5

locoM2/locoM5

NanoStationM/locoM Series Quick Start Guide

https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]

Power Cord

NanoStationlocoM9 Zip Tie PoE (24V, 0.5A) with Mounting

Bracket

Power Cord

locoM9

Installation Requirements

Shielded Category 5 (or above) cabling with drain wire should be used for all wired

Ethernet connections and should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from harmful outdoor environments and

destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For

more details, visit ui.com/toughcable

Surge protection should be used for all outdoor installations. We recommend that you use

two Ethernet Surge Protectors, model ETH-SP, one near the NanoStation and the other at

the entry point to the building. The ETH-SP will absorb power surges and safely discharge

them into the ground.

NanoStationM/locoM Series Quick Start Guide

https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]

Hardware Overview

NSM2/NSM3/NSM365/NSM5/locoM2/locoM5

NanoStationM/locoM Series Quick Start Guide

https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]

NanoStationM/locoM Series Quick Start Guide

https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]

Power LED

LAN1 LED

LAN2 LED

Signal LEDs

Secondary Port

The LED will light green when the device is connected to a power source.

The LED will light steady green when an active Ethernet connection is made to the

Main/LAN port and flash when there is activity.

(NanoStation M2/M3/M5 only) The LED will light steady green when an active Ethernet

connection is made to the Secondary port and flash when there is activity.

In airOS®, you can modify the threshold values for the wireless signal strength LEDs on the

Advanced tab under Signal LED Thresholds. The default values are shown below:

(NanoStationM2/M3/M5 only) This 10/100 Ethernet port is used for bridging and supports

software-configurable PoE passthrough.

NanoStationM/locoM Series Quick Start Guide

https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]

Main/LAN* Port

Reset Button

Note: To use PoE passthrough on the Secondary port, a 24V, 1A PoE adapter is

required.

This 10/100 Ethernet port is used to connect the power and should be connected to the

LAN and DHCP server.

To reset to factory defaults, press and hold the Reset button for more than 10 seconds

while the device is powered on. Alternatively, the device may be reset remotely via a Reset

button located on the bottom of the PoE adapter.

* The Main port is labeled LAN on the NanoStationlocoM2/M5.

locoM9

NanoStationM/locoM Series Quick Start Guide

https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]

Power LED

LAN1 LED

Signal LEDs

RP-SMA Antenna Connector

Main/LAN Port

Reset Button

The LED will light green when the device is connected to a power source.

The LED will light steady green when an active Ethernet connection is made to the

Main/LAN port and flash when there is activity.

In airOS®, you can modify the threshold values for the wireless signal strength LEDs on the

Advanced tab under Signal LED Thresholds. The default values are shown below:

Reserved for future use.

This 10/100 Ethernet port is used to connect the power and should be connected to the

LAN and DHCP server.

To reset to factory defaults, press and hold the Reset button for more than 10 seconds

while the device is powered on. Alternatively, the device may be reset remotely via a Reset

button located on the bottom of the PoE adapter.

NanoStationM/locoM Series Quick Start Guide

https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]

Installation

NanoStationM/locoM Series Quick Start Guide

https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]

NanoStationM/locoM Series Quick Start Guide

https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]

Andere Handbücher für NanoStationM Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ubiquiti Drahtloser Zugangspunkt Handbücher

Ubiquiti

Ubiquiti M2 GPS Rocket M Series Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation M Series Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AP XG Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket 5AC PTP Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket 5AC-Lite Bedienungsanleitung

Ubiquiti

Ubiquiti LiteAP ac LAP-120 Bedienungsanleitung

Ubiquiti

Ubiquiti PBE-5AC-400-ISO-EU Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBeam AC PBE-5AC-620 Bedienungsanleitung

Ubiquiti

Ubiquiti RP5AC-PRISM Bedienungsanleitung

Ubiquiti

Ubiquiti UBB Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBeam M5-16 Bedienungsanleitung

Ubiquiti

Ubiquiti BulletAC-IP67 Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-IW Bedienungsanleitung

Ubiquiti

Ubiquiti AirFiber X AF-5G34-S45 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP--AC--HD Bedienungsanleitung

Ubiquiti

Ubiquiti LiteBeam LBE-5AC-LR Bedienungsanleitung

Ubiquiti

Ubiquiti RP-5AC-Gen2 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-AC-LITE Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi XG Bedienungs- und Wartungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-IW-HD Bedienungsanleitung

Ubiquiti

Ubiquiti AirMax AC Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Bedienungsanleitung

Ubiquiti

Ubiquiti NBE-M5-16 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung