Ubiquiti UniFi XG Bedienungs- und Wartungsanleitung

Quad-Radio 802.11ac

Wave 2 Access Point

with Dedicated Security

Model: UAP-XG

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi®

Quad‑Radio 802.11ac Wave 2 Access Point with Dedicated

Security. This Quick Start Guide is designed to guide you

through installation and includes warranty terms.

IMPORTANT: The UAP‑XG requires the UniFi Controller

v5.7 or higher, available at:

www.ubnt.com/download/unifi

Package Contents

UniFi AP XG Mounting

Plate

Ceiling Backing

Plate

Ceiling Screws

(Qty. 4)

Keps Nuts

(Qty. 4)

T‑Bar Mounts

(Qty. 2)

T‑Bar Screws

(Qty. 2)

Allen

Wrench

Wall Screws

(Qty. 4)

Screw Anchors

(Qty. 4)

Quad-Radio802.11ac

Wave2 Access Point

withDedicated Security

Model:UAP-XG

Release

Tool

Cable

Feed Plug

Gigabit PoE

(50V, 1.2A)*

Power

Cord*

Quick Start

Guide

*Gigabit PoE and Power Cord are not included with UAP‑XG 5‑pack

and earth grounding must be used as conditions of product warranty. It is the professional

installer’s responsibility to follow local country regulations, including operation within legal

frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.

Installation Requirements

• Phillips screwdriver

• Drill and drill bit (8 mm for wall mounting or 3 mm for ceiling

tile mounting)

• Optional: Drywall or keyhole saw (to cut 18 mm hole for

Ethernet cable feed)

• Cat6A UTP cable for indoor installations

Outdoor Installation Requirements

IMPORTANT: The UAP‑XG may be installed outdoors

under an eave or other protected location. Do not

install the UniFi AP in an open environment.

• Mounting location should be at least 60 cm (2 ft) from the

edge of the eave or ceiling.

• Cable feed opening must be directed away from the open

environment.

• Cable feed must be pointed downwards when wall‑mounted.

• Shielded Category 6 (or above) cabling should be used

for all outdoor wired Ethernet connections and should be

grounded through the AC ground of the PoE.

System Requirements

• Linux, MacOSX, or Microsoft Windows 7/8/10

• Java Runtime Environment 1.6 (1.8 or newer recommended)

• Web Browser: Google Chrome (Other browsers may have

limited functionality.)

• UniFi Controller software v5.7 or newer (available at:

www.ubnt.com/download/unifi)

Network Topology Requirements

• A DHCP‑enabled network (for the AP to obtain an IP address

as well as for the wireless clients after deployment)

• A UniFi Cloud Key or management station running the UniFi

Controller v5.7 (or newer) software, located either on‑site

and connected to the same Layer 2 network, or off‑site in the

cloud or NOC

USG-PRO-4

(DHCP Server)

Internet

LAN

WAN

Remote Access to

UniFi Controller

US-16-XG

UAP-AC-M-PRO

UniFi Hybrid

Cloud Install

DOWNLOADTHROUGHPUT&LATENCY DEVICESON2.4GHZCHANNEL

DEVICESON5GHZCHANNEL

UPLOADTHROUGHPUT&LATENCY

LATENCY THROUGHPUT

SPEEDTEST

msec Mbps

70.94 1

2.33

25 22

597

0.9 116

200+0700+0

0.01 413

2290.2

2118

547

ACTIVEDEVICE

WAN

Inacve 0

Pending

Inacve 0

Pending

ACTIVEDEVICES

Inacve 0

Pending

118

ACTIVEDEVICES

LAN WLAN

DEEPPACKETINSPECTIONCLIENTSDEVICES

250

200

150

100

24HRS 12HRS NOW

Avg/MaxThroughput Latency

Latency[msec]

Throughput[Mbps]

100

24HRS 12HRS NOW

Latency[msec]

Throughput[Mbps]

NetworkProtocols

StreamingMedia

Web/Web2.0

FileTransfer

SocialNetwork

Other

Motorola

Lenovo

SamsungE

Dell

Acer

Other

WLAN

LAN

WAN

118

582GB

23.3GB

22.7GB

8.47GB

3.6GB

5.46GB

258

241

220

213

130

110

126

DEVICES

645GB

TRAFFIC

1172

CLIENTS

1 2 3 4 5 6 7 8 9 10 11

36 40 44 48 52 56 60 64

100 104 108 112 116 120 124 128

132 136 140 144 149 153 157 161 165

CURRENTSITE

Default

USERNAME

admin

UAP-AC-PRO

UAP-XG

UniFi Switch

DOWNLOADTHROUGHPUT&LATENCY DEVICESON2.4GHZCHANNEL

DEVICESON5GHZCHANNEL

UPLOADTHROUGHPUT&LATENCY

LATENCY THROUGHPUT

SPEEDTEST

msec Mbps

7 0.94 1

2.33

25 22

597

0.9 116

200+0 700+0

0.01 413

2290.2

2 118

547

ACTIVEDEVICE

WAN

Inacve 0

Pending

Inacve 0

Pending

ACTIVEDEVICES

Inacve 0

Pending

118

ACTIVEDEVICES

LAN WLAN

DEEPPACKETINSPECTIONCLIENTSDEVICES

250

200

150

100

24HRS 12HRS NOW

Avg/MaxThroughput Latency

Latency[msec]

Throughput[Mbps]

100

24HRS 12HRS NOW

Latency[msec]

Throughput[Mbps]

NetworkProtocols

StreamingMedia

Web/Web2.0

FileTransfer

SocialNetwork

Other

Motorola

Lenovo

SamsungE

Dell

Acer

Other

WLAN

LAN

WAN

118

582GB

23.3GB

22.7GB

8.47GB

3.6GB

5.46GB

258

241

220

213

130

110

126

DEVICES

645GB

TRAFFIC

1172

CLIENTS

1 2 3 4 5 6 7 8 9 10 11

36 40 44 48 52 56 60 64

100 104 108 112 116 120 124 128

132 136 140 144 149 153 157 161 165

CURRENTSITE

Default

USERNAME

admin

Sample Network Diagram

All UniFi devices support off‑site management controllers. For

setup details, see the User Guide on the website:

www.ubnt.com/download/unifi

Hardware Overview

LED

LED Color Status

White Factory default, waiting to be integrated.

Flashing White Initializing.

Alternating

White/Blue

Device is busy; do not touch or unplug it.

This usually indicates that a process such

as a firmware upgrade is taking place.

Blue

Indicates the device has been successfully

integrated into a network and is working

properly.

Quickly

Flashing Blue

This is used to locate an AP.

When you click Locate in the UniFi

Controller software, the AP will flash.

Itwill also display the location of the AP

on the map.

Steady Blue

with Occasional

Flashing

Indicates the device is in an isolated state

(all WLANs are brought down until an

uplink is found).

Ports

IC:6545A-UAPXG

ContainsIC: 6545A-M442G

ContainsIC: 6545A-M445GL

ContainsIC: 6545A-M445GH

FCCID: SWX-UAPXG

ContainsFCC ID: SWX-M442G

ContainsFCC ID: SWX-M445GL

ContainsFCC ID: SWX-M445GH

M/N:UAP-XG

802.3btPoE

Security

Slot

1 GbE Port

10 GbE

Port

Reset

Button

Reset The Reset button serves two functions for the UniFi AP:

• Restart Press and release the Reset button quickly.

• Restore to Factory Default Settings Press and hold the

Reset button for more than five seconds.

1 GbE The 1 GbE port is a 10/100/1000 Ethernet port used for

bridging. It can also be used to connect the power.

10 GbE The 10 GbE port is a 1/10 Gbps Ethernet port used to

connect the power and should be connected to the LAN and

DHCPserver. For 10 Gbps operation, connect the UAP-XG to

an 802.3bt POE switch.

Note: The UAP‑XG can also be powered using the

included Gigabit PoE adapter. For instructions on using

the adapter, see Powering the UniFi AP.

Note: If you need to remove the UniFi AP from the

Mounting Plate, insert the included Release Tool in the

Security Slot to release the Lock Tab and turn the UniFi

AP counterclockwise.

Mounting Plate

The Mounting Plate offers a variety of mounting holes for

different applications. The legend printed on the Mounting

Plate identifies the holes used for each application.

Upgrade from UAP‑AC‑PRO

The UAP‑XG is compatible with the UAP‑AC‑PRO mounting

hardware, so you only need to remove the UAP‑AC‑PRO and

replace it with the UAP‑XG. To begin the upgrade:

1. Insert the Release Tool into the UAP‑AC‑PRO Security

Slot to disengage the lock. Then turn the UAP‑AC‑PRO

counterclockwise and lift it off of the mounting bracket.

Security Slot

UAP-AC-PRO (Wall Mount Installation)

2. Unplug the Ethernet cable from the Main port.

3. Go to the Connecting Ethernet section.

Hardware Installation

The UniFi AP can be mounted on a wall, ceiling tile, drop

ceiling T‑rail (up to 40 mm), or electrical junction box. Perform

the steps for the appropriate installation.

Note for UniFi AP replacement: The holes marked “A” on

the Mounting Plate line up with the holes of mounting

brackets used for previous UniFi AP models.

Wall Mount

1. Position the Mounting Plate at the desired location on the

wall with the Arrow pointing up.

2. Mark the four mounting holes marked “A”, and use an

8mm drill bit to drill the holes. If your Ethernet cable feeds

through the wall, cut or drill a hole approximately 18 mm in

diameter. Then feed the CAT6A cable through the hole.

Arrow

Optional 18 mm Hole for

Ethernet Cable Feed through the Wall

*640-00341-01*

640-00341-01

3. Insert the Screw Anchors into the holes. Secure the

Mounting Plate to the wall by inserting the Wall Screws into

the anchors.

4. Go to the Connecting Ethernet section, and then return to

step 5.

5. Align the Arrow on the top edge of the UniFi AP with the

Arrow on the Mounting Plate.

Arrow

Lock Tab

Arrow

6. Rotate the UniFi AP clockwise until the tabs lock into place

and the Lock Tab engages.

Ceiling Mount

1. Remove the ceiling tile.

2. Place the Ceiling Backing Plate in the center of the ceiling

tile. Mark the four mounting screw holes and an 18 mm

hole for the Ethernet cable feed.

Optional 18 mm Hole for Ethernet Cable

Feed through the Ceiling Tile

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ubiquiti Drahtloser Zugangspunkt Handbücher

Ubiquiti

Ubiquiti Rocket2AC Prism Bedienungsanleitung

Ubiquiti

Ubiquiti Loco5AC-US Bedienungsanleitung

Ubiquiti

Ubiquiti Uni-fi AP Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-FlexHD Bedienungsanleitung

Ubiquiti

Ubiquiti UBB Bedienungsanleitung

Ubiquiti

Ubiquiti RP5AC-PRISM Bedienungsanleitung

Ubiquiti

Ubiquiti airFiber AF-11 Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket5AC R5AC-PTP Bedienungsanleitung

Ubiquiti

Ubiquiti airFiber AF 60 Bedienungsanleitung

Ubiquiti

Ubiquiti RP-5AC-Gen2 Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBridge M5 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi XG UAP-XG Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi nanoHD AP Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket 5ac PtMP Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-Outdoor Bedienungsanleitung

Ubiquiti

Ubiquiti NBE--2AC--13 Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBeam 5AC Gen 2 NBE-5AC-Gen2 Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket M2 Titanium RM2-Ti Bedienungsanleitung

Ubiquiti

Ubiquiti Loco5AC Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Enterprise AP Bedienungsanleitung

Ubiquiti

Ubiquiti PBE-M5-400 Bedienungsanleitung

Ubiquiti

Ubiquiti PBE-M5-620 Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-HD Bedienungsanleitung

Ubiquiti

Ubiquiti NBE--2AC--13 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung