Ubiquiti UAP-AC-M-PRO Bedienungsanleitung

802.11AC 3x3 MIMO Outdoor

AP with Plug & Play Mesh

Model: UAP-AC-M-PRO

Available from A1 Security Cameras

www.a1securitycameras.com email: sales@a1securitycameras.com

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi®

802.11AC 3x3 MIMO Outdoor Access Point with Plug & Play

Mesh Technology. This Quick Start Guide is designed to guide

you through installation and includes warranty terms.

Important: The UAP-AC-M-PRO requires the UniFi Controller

v5.1.1 or newer, available at: downloads.ubnt.com/unifi

Package Contents

UniFi AP Mesh Pro Mounting

Bracket

Pole Clamps

(Qty. 2)

Carriage Bolts

(Qty. 4)

Flange Nuts

(Qty. 4)

Screws

(Qty. 4)

Screw Anchors

(Qty. 4)

802.11AC 3x3 MIMO Outdoor

AP with Plug & Play Mesh

Model: UAP-AC-M-PRO

Gigabit PoE Adapter

(48V, 0.5A)

Power Cord Quick Start

Guide

cable and earth grounding must be used as conditions of product warranty. TOUGHCable™

is designed for outdoor installations. It is the customer’s responsibility to follow local country

regulations, including operation within legal frequency channels, output power, and Dynamic

Frequency Selection (DFS) requirements.

Available from A1 Security Cameras

www.a1securitycameras.com email: sales@a1securitycameras.com

Installation Requirements

• 13 mm wrench (for pole mounting)

• Cable feed must be pointed downwards when mounted.

• Shielded Category 5 (or above) cabling should be used

for all outdoor wired Ethernet connections and should be

grounded through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial-grade, shielded Ethernet cable from Ubiquiti

Networks. For more details, visit:

www.ubnt.com/toughcable

System Requirements

• Linux, MacOSX, or Microsoft Windows 7/8/10

• Java Runtime Environment 1.6 (1.8 or newer recommended)

• Web Browser: Google Chrome (Other browsers may have

limited functionality)

• UniFi Controller software v5.1.1 or newer, available at:

downloads.ubnt.com/unifi

Wireless Adoption Requirements

The UAP-AC-M-PRO supports wireless adoption into your

UniFi Wi-Fi network. This feature requires a currently managed

UniFiAP operating with the following configuration:

• The UniFi AP must be running firmware 3.7.7 or newer

• At least one SSID enabled and operating on 5 GHz band

• The UAP-AC-M-PRO must be within wireless range of the

UniFi AP

Available from A1 Security Cameras

www.a1securitycameras.com email: sales@a1securitycameras.com

Network Topology Requirements

• A DHCP-enabled network (for the UniFi device to obtain an IP

address as well as for the wireless clients after deployment)

• A UniFi Cloud Key or management station running the UniFi

Controller v5.1.1 (or newer) software, located either on-site

and connected to the same Layer-2 network, or off-site in

the cloud or NOC

US-16-150W

USG-PRO-4

(DHCP Server)

Internet

UAP-AC-PRO

UAP-AC-M-PRO

LAN

WAN

UniFi Cloud Key

(UniFi Controller)

Remote Access to

UniFi Controller

UAP-AC-M-PRO

Sample Network Diagram

All UniFi devices support off-site management controllers.

For setup details, see the User Guide on the website:

documentation.ubnt.com/unifi

Available from A1 Security Cameras

www.a1securitycameras.com email: sales@a1securitycameras.com

Hardware Overview

LED

Status

LED

LED Color Status

Flashing White Initializing.

Steady White Factory default, waiting to be integrated.

Alternating

White/Blue

Device is busy; do not touch or unplug it.

This usually indicates that a process such

as a firmware upgrade is taking place.

Quickly Flashing

Blue

Used to locate and identify a UniFi device.

When the Locate feature is activated in

the UniFi Controller software, the Status

LED will flash blue. It will also display the

location of the device on the map.

Steady Blue

Indicates the device has been successfully

integrated into a network and is working

properly.

Steady Blue

with occasional

flashing

Indicates the device is in an isolated state

(all WLANs are brought down until an

uplink is found).

Available from A1 Security Cameras

www.a1securitycameras.com email: sales@a1securitycameras.com

Ports

Main

Ethernet Port

Reset

Button

Secondary

Ethernet Port

Secondary The Secondary port is a Gigabit Ethernet port used

for bridging.

Reset The Reset button serves two functions for the UniFi AP:

• Restart Press and release the Reset button quickly.

• Restore to Factory Default Settings Press and hold the

Reset button for more than five seconds.

Main The Main port is a Gigabit PoE port used to connect the

power and should be connected to the LAN and DHCP server.

Power can be provided by one of the following:

• Gigabit PoE Adapter (included)

• Ubiquiti Networks UniFi Switch with PoE

• 802.3af/802.3at PoE+ compliant switch

Available from A1 Security Cameras

www.a1securitycameras.com email: sales@a1securitycameras.com

Hardware Installation

The UAP-AC-M-PRO includes hardware for mounting on a

pole or mast. Alternatively, it can be installed on a wall using

additional fastening hardware.

Pole Mount

1. Insert two Carriage Bolts into each Pole Clamp and attach a

Flange Nut on each bolt.

Note: The mounting assembly can accommodate a

Ø 38 - 76 mm pole.

2. Remove the Mounting Bracket from the back of the UniFi AP

by depressing the two snap pins.

Available from A1 Security Cameras

www.a1securitycameras.com email: sales@a1securitycameras.com

3. Attach one of the Pole Clamps to the pole by sliding the

Carriage Bolts around the pole and into the top two slots of

the Mounting Bracket.

4. Uniformly hand-tighten each Flange Nut. Ensure the Pole

Clamp is evenly clamped around the pole and tighten each

Flange Nut to approximately 25 N-m.

5. Repeat steps 2 and 3 for the second Pole Clamp.

Available from A1 Security Cameras

www.a1securitycameras.com email: sales@a1securitycameras.com

6. Attach the UniFi AP to the Mounting Bracket:

a. Position the UniFi AP with the Mounting Bracket aligned

between the mounting tabs on the back of the UniFi AP.

b. Slide the UniFi AP downward into the grooves of the

Mounting Bracket until the snap pins engage and lock

the UniFi AP in place.

Available from A1 Security Cameras

www.a1securitycameras.com email: sales@a1securitycameras.com

Wall Mount

To mount the UniFi AP on a wall, securely attach the Mounting

Bracket to the wall using four fasteners (not included).

Note: The Mounting Bracket must attach directly to a stud

or other structurally stable surface.

1. Locate the stud.

2. Position the Mounting Bracket on the stud, ensuring at least

two holes are centered on the stud.

3. Mark and drill the four holes.

4. Insert the Screw Anchors in the holes as necessary.

5. Secure the Mounting Bracket to the wall the four Screws.

Available from A1 Security Cameras

www.a1securitycameras.com email: sales@a1securitycameras.com

Inhaltsverzeichnis

Andere Ubiquiti Drahtloser Zugangspunkt Handbücher

Ubiquiti

Ubiquiti Loco5AC Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-IW-HD Bedienungsanleitung

Ubiquiti

Ubiquiti AirMax AC Bedienungsanleitung

Ubiquiti

Ubiquiti RocketM Series Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-AC-LR-5-EU Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-FlexHD Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-IW Bedienungsanleitung

Ubiquiti

Ubiquiti PBE-M5-400 Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation loco Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AP FlexHD Bedienungsanleitung

Ubiquiti

Ubiquiti RP5AC-PRISM Bedienungsanleitung

Ubiquiti

Ubiquiti airFiber AF 60 Bedienungsanleitung

Ubiquiti

Ubiquiti NBE--2AC--13 Bedienungsanleitung

Ubiquiti

Ubiquiti NBE-5AC-Gen2 Bedienungsanleitung

Ubiquiti

Ubiquiti BulletM2-HP Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBeam PBE-5AC-Omni Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket5ac PtP Bedienungsanleitung

Ubiquiti

Ubiquiti U-Installer Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket 5AC PTP Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-AC-LR Bedienungsanleitung

Ubiquiti

Ubiquiti GigaBeam GBE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Dream Machine Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-AC-LR Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung