Ubiquiti UniFi AP BeaconHD Bedienungsanleitung

UAP-BeaconHD Wall Plate (Optional)

Package Contents

System Requirements

If a controller is used: UniFi Network Controller software v5.11 or newer (running on a UniFi

Cloud Key or other server), available at:

ui.com/download/uni

(1) UniFi Access Point or Dream Machine for the UAP-BeaconHD to mesh to

Either of the following is required:

iOS or Android™ Mobile Device with UniFi Network App Installed

Web Browser: Google Chrome (Other browsers may have limited functionality)

Hardware Overview

UAP-BeaconHD Quick Start Guide

System LED

Reset Button

Flashing White Initializing.

White Factory defaults, waiting for integration.

Alternating White/Blue Device is busy; do not touch or unplug it. This usually

indicates that a process such as a rmware upgrade is

taking place.

Blue Successfully integrated into a network and working

properly.

Flashing Blue

This is used to locate a device.

When you click Locate in the UniFi Network Controller

software, the LED will ash blue. The software will also

display the location of the device on the map.

Resets to factory defaults. The device should be running after bootup is complete. Press

and hold the Reset button for about 10 seconds until the LED starts ashing and then

becomes solidly lit. After a few seconds, the LED will turn oﬀ, and the device will

automatically reboot.

Connecting Power

UAP-BeaconHD Quick Start Guide

Replacing the Wall Plate (Optional)

If the UAP-BeaconHD doesn’t t over the existing wall plate, install the included Wall Plate

instead.

UAP-BeaconHD Quick Start Guide

Before You Begin

The UAP-BeaconHD is automatically discovered by the UniFi Network Controller of a UniFi AP

or UDM that can hear the UAP-BeaconHD.

Before adopting the UAP-BeaconHD, access the conguration screen of the nearby UniFi AP

or UDM. Ensure that Allow meshing from other access points is enabled (enabled by default).

UAP-BeaconHD Quick Start Guide

Adopting the UAP-BeaconHD

You have the following options:

“Using the UniFi Network App”

“Using the UniFi Network Software”

Using the UniFi Network App



UAP-BeaconHD Quick Start Guide

5. The System LED will turn blue to conrm that it has been successfully adopted.

Using the UniFi Network Software

1. From the UniFi Network Controller dashboard, click Devices in the left menu bar.

2. On the Devices screen, locate the UAP-BeaconHD in the list of devices under the Model

column. To adopt the UAP-BeaconHD, click Adopt.

UAP-BeaconHD Quick Start Guide

3. The System LED will turn blue to conrm that it has been successfully adopted.

Specications

UAP-BeaconHD

Dimensions 169.7 x 112.15 x 32.2 mm

(6.68 x 4.42 x 1.27")

Weight 260 g

(9.17 oz)

Max. Power Consumption 11.5W

Power Method AC

Power Supply AC

Supported Voltage Range 100 - 240VAC, 0.3A Max., 50/60 Hz

LED System Status

Operating Frequency 2.4 GHz

5 GHz

Max. TX Power (EIRP)

2.4 GHz 24.8 dBm

5 GHz 30 dBm

Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2

Wireless Security WEP, WPA-PSK,

WPA-Enterprise (WPA/WPA2, TKIP/AES)

Operating Temperature -10 to 60° C (14 to 140° F)

Operating Humidity 5 to 95% Noncondensing

Certications FCC, IC

Antenna Gain of 4 Single-Polarity Antennas

UAP-BeaconHD Quick Start Guide

Antenna Gain of 4 Single-Polarity Antennas

(2) Dual-Band 2.4 GHz 4.5 dBi

5 GHz 5 dBi

(2) Single-Band 5 GHz 5 dBi

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specied by the manufacturer.

WARNING:

Do not use this product in location that can be submerged by water.

WARNING:

Avoid using this product during an electrical storm. There may be a remote risk of

electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the

manufacturer’s label. Connection to a diﬀerent power source than those specied may result in

improper operation, damage to the equipment or pose a re hazard if the limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service should be provided only by a

qualied service technician.

Limited Warranty

ui.com/support/warranty

The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where

applicable, specify arbitration instead of jury trials or class actions.

Compliance

FCC

Changes or modications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

UAP-BeaconHD Quick Start Guide

be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

This radio transmitter (FCC ID: SWX-UDMB) has been approved by FCC.

ISED Canada

CAN ICES-3(B)/NMB-3(B)

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the

following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may cause undesired operation

of the device.

This radio transmitter (IC: 6545A-UDMB) has been approved by ISED Canada.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for

harmful interference to co-channel mobile satellite systems.

CAN ICES-3(B)/NMB-3(B)

Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de

licence. L’exploitation est autorisée aux deux conditions suivantes :

1. l’appareil ne doit pas produire de brouillage;

2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

Le présent émetteur radio (IC : 6545A-UDMB) a été approuvé par ISDE Canada.

Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation

à l’intérieur an de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles

utilisant les mêmes canaux.

IMPORTANT NOTE:

Radiation Exposure Statement:

This equipment complies with radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20 cm between the radiator

and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

AVIS IMPORTANT :

Déclaration sur l’exposition aux rayonnements :

Cet équipement est conforme aux limites prévues pour l’exposition aux rayonnements dans un

environnement non contrôlé.

UAP-BeaconHD Quick Start Guide

Dieses Handbuch passt für folgende Modelle

Andere Ubiquiti Drahtloser Zugangspunkt Handbücher

Ubiquiti

Ubiquiti NanoBridge M5 Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC Bedienungsanleitung

Ubiquiti

Ubiquiti airFiber AF-5 Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStationM Series Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AC AP Mesh Pro Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-IW Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti PBE-5AC-400-ISO-EU Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Wifi BaseStationXG Bedienungsanleitung

Ubiquiti

Ubiquiti NB?2G18 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AP XG Bedienungsanleitung

Ubiquiti

Ubiquiti Loco5AC Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-AC-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti NBE-5AC-Gen2 Bedienungsanleitung

Ubiquiti

Ubiquiti PBE-M5-620 Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBeam AC PBE-5AC-620 Bedienungsanleitung

Ubiquiti

Ubiquiti M2 GPS Rocket M Series Bedienungsanleitung

Ubiquiti

Ubiquiti airFiber AF 60 Bedienungsanleitung

Ubiquiti

Ubiquiti airFiber AF-11 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP--AC--HD Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-Outdoor-5 Bedienungsanleitung

Ubiquiti

Ubiquiti Bullet M5 HP Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung