Uniden App Cam Floodlight Bedienungsanleitung

APP CAM

FLOODLIGHT

QUICK START GUIDE

IMPORTANT SAFETY PRECAUTIONS

Damages caused by non-compliance with this Owner’s Manual will void

the warranty! We will not assume any liability for damages to items or

persons caused by improper handling or non-compliance with the safety

notices! Any warranty claim will be null and void in such cases.

• Never tug on the power cords. Use the plug to unplug it from the outlet.

• If you wish to hardwire the App Cam Floodlight, consult with a licensed

electrician and installation and wiring must be performed by a licensed

electrcian in accordance with local and national wiring rules (e.g., AS/

NZS 3000 Electrical Installations).

• Do not connect the App Cam Floodlight to a dimmer switch or timer.

• App Cam Floodlight must be installed on a flat vertical wall and

capable to support the weight of the camera.

• Verify that the supply voltage is correct. Connect the camera to a

AC240V, 50Hz power source.

• Do not open or disassemble the product. There are no user

serviceable parts inside.

• Do not install near combustible or flamable surfaces.

CONTENTS

IMPORTANT SAFETY PRECAUTIONS ��2

CONTENTS ��3

OVERVIEW� ��4

Features ................................................................................... 4

WHAT’S IN THE BOX? ��5

GETTING TO KNOW YOUR APP CAM FLOODLIGHT �� 6

INSTALLATION �� 7

General Placement Considerations ......................................... 7

Wi-Fi Operating Considerations ............................................... 7

Installation Diagram ................................................................. 8

Installing the Camera ............................................................... 9

INITIAL CAMERA SETUP �� 10

Adjusting the Floodlight and Camera .................................... 14

TROUBLESHOOTING �� 15

SPECIFICATIONS �� 16

WARRANTY

OVERVIEW

Uniden’s App Cam Floodlight camera works with your smartphone to

create a powerful home security network. No PC interface is needed to

view video on your smartphone or wireless devices. It is suitable for day

or night time use.

Features

• 1080P Full HD video quality

• Thermo Sense PIR motion detection up to 10m

• Two floodlights up to 2500lux

• Support manual / PIR trigger / APP control light switch

• Support to control the brightness of the light via App

• 150°Wide viewing angle, see more of every moment

• 2.4GHz WiFi connection, no network cord required

• Support MicroSDcard storage up to 128GB, min class 10

• Rotatable panorama design, full view of every angle

• Support 2-way audio between phone and camera

• 7x24 video recordings to local storage

• Image may vary slightly from the actual product.

• If any item is missing or damaged, contact your place of purchase

immediately. Never use damaged products!

• Need help? Get answers at our website:

www.uniden.com.au for Australian model.

All trademarks are registered trademarks of their respective owners.

WHAT’S INSIDE THE BOX

Floodlight Camera Bracket Screws

Mounting Screw

and Washer

Grounding Screw

(For Hardwiring)

Wall Bracket

Silicone Cap Weatherproof Cushion

GETTING TO KNOW YOUR

APP CAM FLOODLIGHT

Camera Lock

Collar

Light Lock Collar

PIR Motion Detector

Light Adjustment

Knob

Lens

Speaker

LED Indicator

Microphone

2500 Lux Floodlight

General Placement Considerations

• The cameras included are weatherproof and have an IP65 weather

rating. Water can be sprayed on them and they will still work;

however, the cameras cannot be submerged underwater.

• Although the cameras can be exposed to the rain splashes, it is

recommended that, if they are used outdoors, they be mounted

under some type of cover like a patio overhang or an eave.

• Also, as dust, grime, and cobwebs accumulate on the camera glass,

they can reflect light and might lower video quality. Periodically, clean

the lens glass with a soft cloth.

• Avoid having a direct light source in view of the camera. This

includes street lights, ceiling or floor lamps, etc.

Wi-Fi Operating Considerations

• Ensure the Wi-FI signal reception is acceptable between the App

Cam Floodlight and the WiFi router. If necessary, reduce the distance

between them to improve overall system performance.

• As the Wi-Fi environments may vary including home construction type

and wireless interference from other electronic devices, your device

may indicate that the camera is disconnected or may display a black

screen.

• Please note the camera can only connect to 2.4G Wi-Fi and does not

support 5G Wi-Fi connection.

• If you’re getting a weak Wi-Fi signal or you can’t connect to Wi-Fi at

all on your phone at the installation area, we recommend moving your

router closer or install a Wi-Fi extender to improve signal reception or

selecting another installation location.

INSTALLATION

Installation Diagram

Camera Lock

Collar

Light Lock Collar

PIR Motion Detector

Silicone Cap

Light Adjustment

Knob

Mounting Screw

and Washer

Weatherproofing

Cushion

Wall Bracket

Bracket Screw

Installing the Camera

1. Hold the wall bracket where you want to mount it and mark the

location of the screw holes.

2. Use the included bracket screws to secure the wall bracket to the wall.

3. Tug gently on the wall bracket to make sure it is securely in place.

4. Peel the backing off the adhesive Waterproof Cushion and stick it to

the back of the App Cam Floodlight.

5. Place the App Cam Floodlight (make sure the “UP” arrow on the back

is pointing up) against the wall, aligning the center mounting holes and

lock it securely with the provided long mounting screw and washer.

6. Insert the provided screw cap firmly into the center mounting hole.

7. Remove the protective film from the camera.

8. Connect the power cord into a standard indoor power outlet. Switch

on the plug and allow the camera to power up. This can take up to a

minute.

9. When the camera starts flashing red, it is ready to be paired with your

Wi-Fi network.

LED Light status Camera Status

Solid Red LED Camera is booting up. Live streaming/Motion

recording

Red LED Flashing Waiting for Wi-Fi conguration.

Blue LED Flashing Connecting to Wi-Fi

Sold Blue LED Camera is online

To set up your new App Cam Floodlight, please make sure it’s

successfully installed, and that the status LED on the camera is flashing

red.

This flashing red status LED means that your Camera Floodlight is ready

to be paired to your My Uniden App

Prerequisites

• You must have an available Wi-Fi-enabled Smartphone (Android or

iOS smartphone).

• The App Cam Floodlight and your mobile device must within the same

Wi-Fi network range for initial setup (ideally within 3m from the router).

• Wi-Fi router connection is 2.4GHz and password if any.

1. Search and download the free My Uniden App from the App Store for

iOS devices or Play Store for Android devices. You will need to create

an account specifically for the My Uniden app. If you already have a My

Uniden app account, you will log into the My Uniden App using your My

Uniden account email and password. You can skip to Step 6.

2. When the LED indicator starts flashing red, the camera is ready to

be paired with your Wi-Fi network. If the LED indicator is not red and

flashing quickly, press and hold the reset button, wait for the LED

indicator to flashing red.

INITIAL CAMERA SETUP

Press and hold the Reset button (behind the

camera) for 5 seconds to reset the camera

* Please note that app screenshots are for reference only� User Interface for iPhone and

Android Phones might differ in terms of icons layout and functionality and may change

without notice�

As the My Uniden App is constantly under development to enrich user experience,

the icons/screens shown in this QSG may vary slightly from the actual app.

Inhaltsverzeichnis

Andere Uniden Sicherheitskamera Handbücher

Uniden

Uniden UDR444 Bedienungsanleitung

Uniden

Uniden SOLO+ Bedienungsanleitung

Uniden

Uniden LightCam 40HD Bedienungsanleitung

Uniden

Uniden App Cam Solo PT Bedienungsanleitung

Uniden

Uniden App Cam 4K Bullet-S Bedienungsanleitung

Uniden

Uniden APPCAM25HD Bedienungsanleitung

Uniden

Uniden UWS1100 Bedienungsanleitung

Uniden

Uniden UDR444 Bedienungsanleitung

Uniden

Uniden Pro710NPTZC Bedienungsanleitung

Uniden

Uniden G101 Bedienungsanleitung

Uniden

Uniden Guardian GC45 Bedienungsanleitung

Uniden

Uniden App Cam Pano Series Bedienungsanleitung

Uniden

Uniden UDS655 Bedienungsanleitung

Uniden

Uniden App Cam Solo Pro Series Bedienungsanleitung

Uniden

Uniden GNC 701 Bedienungsanleitung

Uniden

Uniden UDS655 Bedienungsanleitung

Uniden

Uniden UDSC15 Bedienungsanleitung

Uniden

Uniden APPCAM23 Service-Handbuch

Uniden

Uniden GC43 Bedienungsanleitung

Uniden

Uniden UDR444 Bedienungsanleitung

Uniden

Uniden UDWC25 Bedienungsanleitung

Uniden

Uniden APPCAM23 Bedienungsanleitung

Uniden

Uniden 4KTPD-MVF Bedienungsanleitung

Uniden

Uniden AppCam Solo 2 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung