Urban Electric CLIPPER Kurzanleitung

MA-1540

CLIPPER

ASSEMBLY AND MOUNTING INSTRUCTIONS

GENERAL NOTES

COMPONENTS PROVIDED FOR INSTALLATION

MOUNTING PLATE #6 WOOD SCREWS #6 MACHINE SCREWS SET SCREWS

HEX WRENCH WALL ANCHORS WIRE NUTS HOUSEHOLD BULB(S)

• THIS LUMINAIRE IS SUITED FOR WET LOCATIONS.

• THIS LUMINAIRE IS UL LISTED. WHEN INSTALLING LUMINAIRE, CONFORM

TO ALL APPLICABLE LOCAL ELECTRICAL CODES, ORDINANCES, AND THE

NATIONAL ELECTRICAL CODE (NEC).

• FOR YOUR SAFETY AND PROPER OPERATION OF LUMINAIRE, READ AND

UNDERSTAND ALL INSTRUCTIONS COMPLETELY BEFORE COMMENCING

INSTALLATION OF THIS LUMINAIRE.

• CAREFULLY UNPACK THE LUMINAIRE AND INSPECT FOR DAMAGE.

• THIS PRODUCT IS RATED ONE 60W MAX, TYPE A BULB(S).

• SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

CAUTION

THIS PRODUCT SHOULD BE INSTALLED ONLY BY A LICENSED ELECTRICIAN.

WARNING

THE ELECTRICITY MUST BE TURNED OFF AT THE MAIN FUSE BOX BEFORE

INSTALLING THIS LUMINAIRE. TURNING THE POWER OFF USING THE LIGHT

SWITCH MAY NOT BE SUFFICIENT TO PREVENT ELECTRICAL SHOCK.

CLIPPER

ASSEMBLY AND MOUNTING INSTRUCTIONS MA-1540

MOUNTING INSTRUCTIONS

STEP 1

SHUT OFF THE MAIN ELECTRICAL SUPPLY TO THE JUNCTION

BOX FROM THE FUSE BOX/CIRCUIT BREAKER. TURNING POWER

OFF AT THE SWITCH IS NOT SUFFICIENT.

STEP 2

REMOVE MOUNTING PLATE BY REMOVING BOTTOM SET

SCREWS ONLY FROM THE BACK OF THE FIXTURE (USUALLY

SHIPPED WITH SET SCREWS ATTACHED) AND SET FIXTURE AND

SET SCREWS ASIDE.

STEP 3

LOCATE JUNCTION BOX AND PULL HOUSE SUPPLY CIRCUIT

WIRING THROUGH THE WIRE-WAY OF THE SEPARATE

MOUNTING PLATE.

STEP 4

LOCATE THE JUNCTION BOX AND ATTACH THE MOUNTING PLATE

USING THE MACHINE SCREWS PROVIDED OR MOUNT DIRECTLY

TO THE WALL WITH THE WOOD SCREWS AND WALL ANCHORS

PROVIDED.

STEP 5

USING THE WIRE NUTS PROVIDED, MAKE ELECTRICAL

CONNECTIONS BY FOLLOWING THE ELECTRICAL

CONFIGURATION TABLE ON THE NEXT PAGE. ENSURE THAT ALL

ELECTRICAL CONNECTIONS ARE WRAPPED WITH UL-LISTED

ELECTRICAL TAPE.

STEP 6

ATTACH THE FIXTURE TO THE WALL PLATE BY SLIPPING IT OVER

THE WALL PLATE AND TIGHTENING THE BOTTOM SET SCREWS

PROVIDED. BE CAREFUL TO AVOID SCRATCHING THE FINISH ON

THE FIXTURE.

STEP 7

INSTALL LIGHT BULB IN FIXTURE SOCKET AND RESTORE POWER

TO THE CIRCUIT.

STEP 8

CONFIRM PROPER OPERATION OF THE LIGHT FIXTURE.

STEP 9

IF THE FIXTURE IS INSTALLED IN AN EXTERIOR LOCATION, RUN

A SMALL BEAD OF SEALANT AROUND THE PERIMETER OF THE

BACKPLATE TO PREVENT WATER FROM REACHING THE WIRE

CONNECTIONS.

STEP 2 STEP 4 STEP 6

CLIPPER

ASSEMBLY AND MOUNTING INSTRUCTIONS MA-1540

MOUNTING DIAGRAM

ELECTRICAL CONFIGURATION TABLE

FROM HOME FROM LUMINAIRE

CONNECT BLACK OR RED (HOT)

HOUSE SUPPLY CIRCUIT WIRE TO:

LUMINAIRE ROUND WIRE (HOT)

CONNECT WHITE (NEUTRAL)

HOUSE SUPPLY CIRCUIT WIRE TO:

LUMINAIRE RIBBED WIRE

(NEUTRAL)

CONNECT GREEN INSULATED OR BARE COPPER (GROUND -) HOUSE

SUPPLY CIRCUIT WIRE AND LUMINAIRE BARE STRANDED WIRE

(GROUND -) TO GREEN GROUND SCREW ON CROSSBAR.

GENERAL NOTE: USE UL LISTED WIRE NUTS FOR THE

WIRING CONNECTIONS IN THIS LUMINAIRE. WRAP WIRE NUT

CONNECTIONS WITH UL LISTED ELECTRICAL TAPE.

FOR QUESTIONS, PLEASE CONTACT CLIENT SERVICES AT:

843.723.8140 OR [email protected]

CLIPPER

ASSEMBLY AND MOUNTING INSTRUCTIONS MA-1540

GLASS INSTRUCTIONS

GLASS DIAGRAM

STEP 1 STEP 2 STEP 3

STEP 1

REMOVE GLASS HOLDER BY REMOVING THE 2 SCREWS TOP

AND BOTTOM INSIDE FIXTURE. SLIDE PANES OF GLASS INTO

THE SIDES OF THE FIXTURE AND SECURE BY RE-ATTACHING

GLASS HOLDER.

STEP 2

CAREFULLY INSERT DOOR GLASS INTO DOOR THROUGH TOP

OPENING. COVER THE TOP CORNERS OF THE DOOR WITH A

SOFT CLOTH AND PINCH WITH A PAIR OF PLIERS TO SECURE

THE GLASS IN PLACE.

Andere Urban Electric Außenleuchte Handbücher

Urban Electric

Urban Electric PAM POCKET Kurzanleitung

Urban Electric

Urban Electric ARCHIBALD Kurzanleitung

Urban Electric

Urban Electric HARROGATE Kurzanleitung

Urban Electric

Urban Electric DUNHILL Kurzanleitung

Urban Electric

Urban Electric ABBOTT Kurzanleitung

Urban Electric

Urban Electric BALFOUR Kurzanleitung

Urban Electric

Urban Electric CHARLESTON Kurzanleitung

Urban Electric

Urban Electric ADGER’S WHARF Kurzanleitung

Urban Electric

Urban Electric BELMONT WALL MM-3900 Kurzanleitung

Urban Electric

Urban Electric GAS VIC Kurzanleitung

Urban Electric

Urban Electric ALLEN Kurzanleitung

Urban Electric

Urban Electric ALTAMONT WET Kurzanleitung

Urban Electric

Urban Electric CAY Kurzanleitung

Urban Electric

Urban Electric MARKHAM Kurzanleitung

Urban Electric

Urban Electric BELMONT WALL Kurzanleitung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung