Vaillant AtmoMAG Bedienungsanleitung

Operating instructions

atmoMAG

MAG mini ...4/1 I

AT, DE

Publisher/manufacturer

Vaillant GmbH

Berghauser Str. 40 D-42859 Remscheid

Tel. +492191 18 0 Fax +492191 18 2810

[email protected] www.vaillant.de

Contents

2Operating instructions atmoMAG 0020273766_00

Contents

1 Safety .................................................................... 3

1.1 Action-related warnings ......................................... 3

1.2 Intended use.......................................................... 3

1.3 General safety information .................................... 3

2 Notes on the documentation .............................. 5

2.1 Observing other applicable documents ................. 5

2.2 Storing documents................................................. 5

2.3 Validity of the instructions...................................... 5

3 Product description............................................. 5

3.1 Gas conversion...................................................... 5

3.2 Information on the data plate................................. 5

3.3 Control elements.................................................... 5

3.4 LED indicator light.................................................. 5

3.5 CE label ................................................................. 5

4 Operation.............................................................. 6

4.1 Cabinet-type casing............................................... 6

4.2 Preparing for start-up............................................. 6

4.3 Starting up the product .......................................... 6

4.4 Switching on the product ....................................... 6

4.5 Drawing hot water.................................................. 6

4.6 Setting the domestic hot water temperature.......... 7

4.7 Modulation ............................................................. 7

5 Troubleshooting .................................................. 7

5.1 Detecting and eliminating faults............................. 7

5.2 Eliminating faults in the product............................. 7

5.3 Replacing the battery............................................. 7

6 Care and maintenance ........................................ 8

6.1 Maintenance .......................................................... 8

6.2 Caring for the product............................................ 8

7 Decommissioning................................................ 8

7.1 Temporarily decommissioning the product............ 8

7.2 Having the product permanently

decommissioned.................................................... 8

7.3 What to do if there is a risk of frost ........................ 8

8 Recycling and disposal....................................... 9

9 Guarantee and customer service....................... 9

9.1 Guarantee.............................................................. 9

9.2 Customer service................................................... 9

Appendix ............................................................................ 10

A Troubleshooting ................................................ 10

Safety 1

0020273766_00 atmoMAG Operating instructions 3

1 Safety

1.1 Action-related warnings

Classification of action-related warnings

The action-related warnings are classified in

accordance with the severity of the possible

danger using the following warning signs and

signal words:

Warning symbols and signal words

Danger!

Imminent danger to life or risk of

severe personal injury

Danger!

Risk of death from electric shock

Warning.

Risk of minor personal injury

Caution.

Risk of material or environmental

damage

1.2 Intended use

There is a risk of injury or death to the user or

others, or of damage to the product and other

property in the event of improper use or use

for which it is not intended.

The products are gas-fired instantaneous

water heaters and, as such, are intended for

hot water generation.

Intended use includes the following:

–observance of the operating instructions

included for the product and any other

system components

–compliance with all inspection and main-

tenance conditions listed in the instruc-

tions.

This product can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental capabil-

ities or lack of experience and knowledge if

they have been given supervision or instruc-

tion concerning use of the product in a safe

way and understand the hazards involved.

Children must not play with the product.

Cleaning and user maintenance work must

not be carried out by children unless they are

supervised.

Any other use that is not specified in these in-

structions, or use beyond that specified in this

document shall be considered improper use.

Any direct use in industrial or commercial

processes is also deemed to be improper.

Caution.

Improper use of any kind is prohibited.

1.3 General safety information

1.3.1 Installation by competent persons

only

The installation, inspection, maintenance

and repair of the product, as well as the gas

settings and gas conversions, must only be

carried out by a competent person.

1.3.2 Danger caused by improper

operation

Improper operation may present a danger to

you and others, and cause material damage.

▶Carefully read the enclosed instructions

and all other applicable documents, par-

ticularly the "Safety" section and the warn-

ings.

▶Only carry out the activities for which in-

structions are provided in these operating

instructions.

1.3.3 Risk of death from escaping gas

What to do if you smell gas in the building:

▶Avoid rooms that smell of gas.

▶If possible, open doors and windows fully

and ensure adequate ventilation.

▶Do not use naked flames (e.g. lighters,

matches).

▶Do not smoke.

▶Do not use any electrical switches, mains

plugs, doorbells, telephones or other com-

munication systems in the building.

▶Close the emergency control valve or the

main isolator.

▶If possible, close the gas isolator cock on

the product.

▶Warn other occupants in the building by

yelling or banging on doors or walls.

▶Leave the building immediately and ensure

that others do not enter the building.

▶Alert the police and fire brigade as soon as

you are outside the building.

1 Safety

4Operating instructions atmoMAG 0020273766_00

▶Use a telephone outside the building to

inform the emergency service department

of the gas supply company.

1.3.4 Risk of death due to blocked or

leaking flue pipework

What to do if you smell flue gas in the prop-

erty:

▶Open all accessible doors and windows

fully to provide ventilation.

▶Switch off the product.

▶Inform a competent person.

1.3.5 Risk of death due to explosive and

flammable materials

▶Do not use the product in storage rooms

that contain explosive or flammable sub-

stances (such as petrol, paper or paint).

1.3.6 Risk of death due to changes to the

product or the product environment

▶Never remove, bridge or block the safety

devices.

▶Do not tamper with any of the safety

devices.

▶Do not damage or remove any tamper-

proof seals on components.

▶Do not make any changes:

–The product itself

–to the gas, supply air, water and electri-

city supply lines

–to the entire flue system

–to the expansion relief valve

–to the drain pipework

–to constructional conditions that may

affect the operational reliability of the

product

1.3.7 Risk of poisoning caused by

insufficient combustion air supply

Conditions: Open-flued operation

▶Ensure that there is a sufficient combus-

tion air supply.

1.3.8 Risk of corrosion damage due to

unsuitable combustion and room air

Sprays, solvents, chlorinated cleaning

agents, paint, adhesives, ammonia com-

pounds, dust or similar substances may lead

to corrosion on the product and in the air/flue

pipe.

▶Ensure that the combustion air supply is

always free of fluorine, chlorine, sulphur,

dust, etc.

▶Ensure that no chemical substances are

stored at the installation site.

1.3.9 Risk of injury and material damage

due to maintenance and repairs

carried out incorrectly or not carried

out at all

▶Never attempt to carry out maintenance

work or repairs on your product yourself.

▶Faults and damage should be immediately

rectified by a competent person.

▶Adhere to the maintenance intervals spe-

cified.

1.3.10 Risk of being burned or scalded by

hot parts

Parts of the product become hot during oper-

ation.

▶Only touch the product and its parts once

they have cooled down.

1.3.11 Risk of material damage caused by

acid

▶Remove any dead batteries from the

product and dispose of these properly.

▶Remove the batteries if you intend to store

the product and not use it for an extended

period.

1.3.12 Risk of death due to lack of safety

devices

A lack of safety devices (e.g. expansion relief

valve, expansion vessel) can lead to poten-

tially fatal scalding and other injuries, e.g. due

to explosions.

▶Ask a competent person to explain how

the safety devices work and where they

are located.

Notes on the documentation 2

0020273766_00 atmoMAG Operating instructions 5

2 Notes on the documentation

2.1 Observing other applicable documents

▶You must observe all operating instructions enclosed with

the system components.

2.2 Storing documents

▶Keep this manual and all other applicable documents

safe for future use.

2.3 Validity of the instructions

These instructions apply only to:

–MAG mini 114/1 I(P-INT): 0010022619

3 Product description

3.1 Gas conversion

If the product is installed in a mobile home, it must not be

converted to a different gas type (using a conversion set)

other than the one specified on the data plate.

▶Leave the product in the gas type setting that was set at

the factory.

3.2 Information on the data plate

The data plate is mounted at the front of the down-draught

diverter, under the product casing, at the factory.

Applicability: Germany

OR Austria

Information on the

data plate

Meaning

MAG Product category

11/14 Power in l/min

-4/1 Chimney connection/product generation

I With electrical ignition and battery

atmoMAG Product series

Type B11 BS Approved unit type

Cat I Single-gas unit

3P Gas boiler category

G31 Permitted gas types with connection

pressures

Pnom. Maximum heat output

Pmin. Minimum heat output

Qnom. Maximum heat input

Qmin. Minimum heat input

Pw max. Maximum permissible water pressure

Serial number 7th to 16th digit = product article number

3.3 Control elements

1 Flow rate se-

lector/temperature

selector

2 Rotary power switch

(10-stage from 50-

100%)

3 Main switch

4 LED indicator light

5 Control panel

6 Sight glass

3.4 LED indicator light

Function Meaning

LED indicator

light lights up

(blue)

Burner is in operation

LED indicator

light flashes (red)

Fault

LED indicator

light flashes

(blue)

The voltage in the battery is so low that

a safe start-up will soon no longer be

guaranteed.

3.5 CE label

The CE label shows that the products comply with the basic

requirements of the applicable directives as stated on the

identification plate.

The declaration of conformity can be viewed at the manufac-

turer's site.

4 Operation

6Operating instructions atmoMAG 0020273766_00

4 Operation

Warning.

Risk of being scalded by hot water.

Incorrectly set hot water temperatures and

hot water in the lines may lead to scalding.

▶Check the hot water temperature with

your hand.

Warning.

Risk of burns caused by touching the

sight glass!

▶Avoid direct contact with the heat-con-

ducting sight glass.

Caution.

Risk of material damage caused by an

interrupted water supply.

▶Ensure that the water supply cannot be

interrupted.

4.1 Cabinet-type casing

Enclosing the product in cabinet-type casing requires compli-

ance with the applicable design instructions.

If you require cabinet-type casing for your product, consult

a heating specialist company. Never, under any circum-

stances, enclose the product yourself.

4.2 Preparing for start-up

1. Ask the competent person who installed the product to

explain to you where these isolator devices are located

and how to handle them.

2. Open the gas isolator cock fully.

3. Open the cold water stop valve that is set on-site.

4.3 Starting up the product

▶Only start up the product once the casing has been com-

pletely closed.

4.4 Switching on the product

1. Press the main switch (1) so that it clicks into place.

2. Turn the rotary power switch (2) to the required level.

◁The product is ready for operation.

Note

If you notice leaks in the hot water pipes

between the product and the draw-off points,

you must immediately close the cold-water

isolation valve that was set on-site.

Have the leaks eliminated by a competent

person.

4.5 Drawing hot water

1. Open the hot water valve at the draw-off point.

◁The product automatically starts up.

◁When the product is operating, the LED indicator

lights up blue.

Conditions: No hot water is supplied.

▶Ensure that any stop valve that is installed upstream of

the hot water valve is completely open.

▶Ensure that the product's main switch has clicked into

place.

▶Remove the filter that is installed in the hot water valve

and check the filter for dirt and limescale.

▶Use a descaling solution to remove the limescale from

the filter.

2. Close the hot water valve on the draw-off point.

◁The product automatically shuts down.

Troubleshooting 5

0020273766_00 atmoMAG Operating instructions 7

4.6 Setting the domestic hot water temperature

1. Turn the temperature selector (1) clockwise to decrease

the domestic hot water flow rate.

–The domestic hot water temperature is thereby af-

fected (increased).

2. Turn the rotary power switch (2) anti-clockwise to in-

crease the burner output.

–The domestic hot water temperature is thereby in-

creased.

3. Turn the temperature selector (1) anti-clockwise to in-

crease the domestic hot water flow rate.

–The domestic hot water temperature is thereby af-

fected (reduced).

4. Turn the rotary power switch (2) clockwise to decrease

the burner output.

–The domestic hot water temperature is thereby re-

duced.

Note

If you increase the domestic hot water flow

rate and turn the rotary power switch anti-

clockwise, the gas consumption is increased.

4.7 Modulation

The burner output (gas flow rate) is continually and auto-

matically matched to the domestic hot water flow rate in the

range between the preselected setting on the rotary power

switch and the product's lowest possible output (approx.

35%). As a result, the domestic hot water temperature is

kept at a constant.

5 Troubleshooting

5.1 Detecting and eliminating faults

▶A fault is visually displayed by the LED indicator light

(flashing red). As the end user, you must only eliminate

faults in accordance with the table that is contained in the

appendix.

▶If the product still does not function without problems

after the checks have been carried out using the table,

contact your competent person to rectify the problem.

5.2 Eliminating faults in the product

If the product was blocked by a safety device, wait approx.

10 minutes and then clear the product of any faults. The

product can only automatically ignite again after the faults

are cleared.

▶Reset the product as follows:

–Close the water tap.

–Open the water tap again.

–Do not press the main switch.

▶Alternatively, you can clear the product of any faults as

follows:

–Leave the water tap open.

–Press the main switch twice in order to switch the

product off and on again.

▶If resetting does not work or the product is repeatedly

blocked by a safety device, contact a competent person

to have the fault eliminated.

▶Only start the product up again once the fault has been

eliminated by a competent person.

5.3 Replacing the battery

1. Use the main switch to switch off the product or do not

draw off any domestic hot water.

Danger!

Risk of explosion due to heated batteries.

Discharged batteries may explode as a result

of being charged or heated.

▶Do not re-charge discharged batteries.

6 Care and maintenance

8Operating instructions atmoMAG 0020273766_00

▶Keep batteries away from fire and ensure

that they are not heated up in any other

way.

2. Open the battery compartment cover (1).

Note

The battery compartment can be accessed

without removing the front casing.

Danger!

Risk of death caused by unsuitable batter-

ies!

If batteries are replaced with the wrong type

of battery, there is a risk of explosion.

▶Ensure that you use the correct battery

type when replacing batteries.

▶Dispose of used batteries in accordance

with the instructions in this manual.

3. Remove the old battery (2) and insert a new battery in

the battery compartment in accordance with the mark-

ings on the cover.

Note

Only use batteries of the type D/LR20.

Do not use rechargeable batteries.

6 Care and maintenance

6.1 Maintenance

An annual inspection and biennial maintenance of the

product carried out by a competent person is a prerequisite

for ensuring that the product is permanently ready and

safe for operation, reliable, and has a long service life. The

inspection may require maintenance to be carried out earlier,

depending on the results.

6.2 Caring for the product

▶Clean the casing with a damp cloth and a little solvent-

free soap.

▶Do not use sprays, scouring agents, detergents, solvents

or cleaning agents that contain chlorine.

7 Decommissioning

7.1 Temporarily decommissioning the product

▶Press the main switch (1).

▶Close the gas stopcock that was set on-site.

◁The gas supply to the burner on the gas-fired instant-

aneous water heater is now blocked.

▶Close the cold-water isolation valve that is set on-site.

7.2 Having the product permanently

decommissioned

▶Have a competent person permanently decommission

the product.

7.3 What to do if there is a risk of frost

If there is a risk of frost, it is necessary to protect the product

against freezing. To do this, you must drain your gas-fired

instantaneous water heater.

▶Temporarily decommission (→Page 8) the product.

▶Undo the drain screw (1) with the sealing ring.

▶Open all of the domestic hot water tap fittings that are

connected to the product so that the product and line

drain until they are completely empty.

▶Leave the domestic hot water tap fittings and the drain

screw open until the product is started up again when the

risk of frost has passed.

▶When subsequently filling the product, only start it up

again once the water that flows out of the opened do-

mestic hot water tap fittings has no bubbles after the

cold-water isolation valve that is set on-site is opened.

Recycling and disposal 8

0020273766_00 atmoMAG Operating instructions 9

8 Recycling and disposal

▶The competent person who installed your product is re-

sponsible for the disposal of the packaging.

If the product is labelled with this mark:

▶In this case, do not dispose of the product with the

household waste.

▶Instead, hand in the product to a collection centre for

waste electrical or electronic equipment.

If the product contains batteries that are labelled with

this mark, these batteries may contain substances that are

hazardous to human health and the environment.

▶In this case, dispose of the batteries at a collection point

for batteries.

9 Guarantee and customer service

9.1 Guarantee

Applicability: Germany

OR Austria

Herstellergarantie gewähren wir nur bei Installation durch

einen anerkannten Fachhandwerksbetrieb.

Dem Eigentümer des Geräts räumen wir diese Hersteller-

garantie entsprechend den Vaillant Garantiebedingungen

ein. Garantiearbeiten werden grundsätzlich nur von unserem

Kundendienst ausgeführt. Wir können Ihnen daher etwaige

Kosten, die Ihnen bei der Durchführung von Arbeiten an dem

Gerät während der Garantiezeit entstehen, nur dann erstat-

ten, falls wir Ihnen einen entsprechenden Auftrag erteilt ha-

ben und es sich um einen Garantiefall handelt.

9.2 Customer service

Applicability: Austria

Vaillant Group Austria GmbH

Clemens-Holzmeister-Straße 6

1100 Wien

Telefon 05 7050

Telefax 05 7050 1199

Telefon 05 7050 2100 (zum Regionaltarif österreichweit, bei

Anrufen aus dem Mobilfunknetz ggf. abweichende Tarife -

nähere Information erhalten Sie bei Ihrem Mobilnetzbetrei-

ber)

[email protected]

www.vaillant.at

www.vaillant.at/werkskundendienst/

E-Mail Kundendienst: te[email protected]

Internet Kundendienst: http://www.vaillant.at/werkskunden-

dienst/

Telefon: 05 7050 2100 (zum Regionaltarif österreichweit, bei

Anrufen aus dem Mobilfunknetz ggf. abweichende Tarife -

nähere Information erhalten Sie bei Ihrem Mobilnetzbetrei-

ber)

Der flächendeckende Kundendienst für ganz Österreich ist

täglich von 0 bis 24 Uhr erreichbar. Vaillant Kundendienst-

techniker sind 365 Tage für Sie unterwegs, sonn- und feier-

tags, österreichweit.

Applicability: Germany

Auftragsannahme Vaillant Kundendienst: 02191 5767901

Appendix

10 Operating instructions atmoMAG 0020273766_00

Appendix

A Troubleshooting

Symptom Possible cause Measure

The product does not work. The

LED does not light up.

Battery flat 1. Replace the battery.

2. Ensure that the cold-water isolation valve is open.

The LED flashes blue for up

to ten minutes after water is

drawn. Loud over-ignition.

Low battery charge ▶Replace the battery.

The product cannot be started

up. The LED flashes red for up

to ten minutes after water is

drawn.

The gas supply is interrupted. 1. Secure the gas supply.

2. For liquefied petroleum gas: Replace an empty gas cylinder

with a full one.

3. Ensure that the isolation valve on the gas connection is

open.

There is air in the gas supply

line.

1. Open and close the water tap several times in order to re-

move air from the gas supply.

2. If the fault persists, have this eliminated by a competent per-

son.

The product switches off during

operation. The LED flashes red.

The gas supply is interrupted. 1. Secure the gas supply.

2. For liquefied petroleum gas: Replace an empty gas cylinder

with a full one.

3. Ensure that the isolation valve on the gas connection is

open.

There is air in the gas supply

line.

1. Open and close the water tap several times in order to re-

move air from the gas supply.

2. If the fault persists, have this eliminated by a competent per-

son.

The battery charge is low. The

product was switched off by a

safety device.

1. Ensure that the cold-water isolation valve is closed.

2. Replace the battery.

3. Wait for 10 minutes and then start up the product again. If

the fault persists, have it eliminated by a competent person.

Inhaltsverzeichnis

Andere Vaillant Boiler Handbücher

Vaillant

Vaillant VIH R 300/3 BR Bedienungsanleitung

Vaillant

Vaillant ecoFIT pure 612 Bedienungsanleitung

Vaillant

Vaillant auroFLOW plus Bedienungsanleitung

Vaillant

Vaillant 0010020394 Bedienungsanleitung

Vaillant

Vaillant VIH S 300/3 BR Bedienungsanleitung

Vaillant

Vaillant ecoFIT pure Bedienungsanleitung

Vaillant

Vaillant VCW 2O Benutzerhandbuch

Vaillant

Vaillant uniSTOR VIH GB 125 S Instructions for and... Bedienungsanleitung

Vaillant

Vaillant electronicVED E ../7 INT II Series Bedienungsanleitung

Vaillant

Vaillant uniSTOR VIH GB SERIES Bedienungsanleitung

Vaillant

Vaillant EIWH electronicVED pro Series Bedienungsanleitung

Vaillant

Vaillant COMBI-HEATER VCW Bedienungsanleitung

Vaillant

Vaillant VED E 18/7 E HK Bedienungsanleitung

Vaillant

Vaillant auroSTOR Bedienungsanleitung

Vaillant

Vaillant VED Bedienungsanleitung

Vaillant

Vaillant ecoFIT pure Bedienungsanleitung

Vaillant

Vaillant ecoTEC plus SERIES Bedienungsanleitung

Vaillant

Vaillant ecoTEC plus VU Bedienungsanleitung

Vaillant

Vaillant ecoFIT pure Bedienungsanleitung

Vaillant

Vaillant allSTOR plus VPS 800/4-5 Bedienungsanleitung

Vaillant

Vaillant auroSTOR VIH S GB 300/3 BES Bedienungsanleitung

Vaillant

Vaillant eloSTOR plus Bedienungsanleitung

Vaillant

Vaillant atmoMAG MAG mini 114/1 I Bedienungsanleitung

Vaillant

Vaillant VED E 8 INT Series Bedienungsanleitung

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

A.O. Smith

A.O. Smith Gphe 50 Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung

PVI

PVI MAXIM Bedienungsanleitung

Vaillant atmoMAG Bedienungsanleitung

Beliebte Boiler Handbücher anderer Marken