Varian ProStar 701 Versionshinweis
Varian, Inc.
2700 Mitchell Drive
Walnut Creek, CA 94598-1675/USA
©Varian, Inc. 2005 03-914947-27:Rev.2
ProStar 701 Fraction
Collector Control
Galaxie Driver Manual
ProStar 701 Fraction Collector Control Manual - 1 - 03-914947-27:2
Table of Contents
Introduction.............................................................................................. 2
General................................................................................................................................2
Installation and Configuration................................................................ 3
Installing the Driver Software...............................................................................................3
Configuring the Communication Server...............................................................................3
Configuring the Driver..........................................................................................................4
Configuring the Varian ProStar 701 Fraction Collector.................................................4
Configuring the Synopsis..............................................................................................5
Building a Method ................................................................................... 7
Creating a New Method.......................................................................................................7
Control Method Section for the Varian ProStar 701 Fraction Collector.............................10
Collector Parameters Control......................................................................................12
Fraction Collector Mode Control.................................................................................14
Rack Control ...............................................................................................................17
Collection Chain Control .............................................................................................19
Starting and Viewing an Acquisition.................................................... 21
Quick Start and Sequence.................................................................................................21
Quick Start (Single Acquisition) ..................................................................................21
Sequence....................................................................................................................23
Running Acquisition Status................................................................................................24
Viewing a Running Acquisition....................................................................................24
Status of the Varian ProStar 701 Fraction Collector...................................................24
ProStar 701 Fraction Collector Control Manual - 2 - 03-914947-27:2
Introduction
General
This document describes the configuration of the Varian
ProStar 701 Fraction Collector driver. It also explains how to
build a control method for this driver, how to start and view a
running acquisition and what actions are available during an
analysis.
ProStar 701 Fraction Collector Control Manual - 3 - 03-914947-27:2
Installation and
Configuration
Installing the Driver Software
To install the Galaxie Drivers software refer to the Galaxie Data
System Installation Guide.
Configuring the Communication Server
To communicate with the ProStar 701 module an
RS232_Interface or an RS232_PC communication bus must be
configured on the acquisition server.
The parameters of the bus to must be the following:
Stops 1 Stop
Baud 19200 Parity EVEN
Bits 8 Bits Flow Control NONE
Buffer Tx 4096 Buffer Rx 4096
NOTE: For more details about the configuration of an RS232_Interface or an RS232_PC
bus, refer to the Galaxie Chromatography Data System Installation’s Guide.
ProStar 701 Fraction Collector Control Manual - 4 - 03-914947-27:2
Configuring the Driver
The driver software configuration is done in the Galaxie
Configuration Manager when a new chromatographic system is
created.
Configuring the Varian ProStar 701 Fraction Collector
Click on the button corresponding to the Varian ProStar
701 Fraction Collector driver and the configuration screen
appears.
Communication Window
Select from the Hardware Interface list the name of the RS232
Bus where the system has been connected.
NOTE: For more details about the RS232 Bus configuration, refer to the
Configuring the Communication Server section in this manual.
ProStar 701 Fraction Collector Control Manual - 5 - 03-914947-27:2
Define the number of ProStar 701 Fraction Collector installed in
the Number of instrument spin edit. Up to four ProStar 701
Fraction Collectors can be defined.
For each fraction collector, define the address in the Fraction
Collector X ID field. Then press the
button, to connect to the instrument.
Configuring the Synopsis
In the Overview part of the system configuration, a synopsis can
be defined for the system. This synopsis depends on the
configured devices.
1. To save the configuration of these devices, click on the OK
button.
2. Right click on the system name in the bottom part of the
Galaxie Configuration Manager screen. A pop-up menu
appears: click on Stop. Then right click on the system name
again, and click on Start.
3. Go back to the System Configuration screen (Properties
wizard). A graphic of the devices that comprise the system
is displayed in the synopsis screen. To configure the
synopsis as the real instrument configuration, move each
module, and then connect it appropriately. To do this, select
one anchor for each of the two modules (the selected
anchors become red) and click on the button; a
connection tube will appear between the two anchors.
Click on the to delete a selected tube, click on the
button to delete all the tubes.
Click on to define a background color, or on to
make the background transparent.
Click on the icon to change the grid color.
ProStar 701 Fraction Collector Control Manual - 6 - 03-914947-27:2
4. Once the synopsis configuration is complete, it will be
displayed in the Galaxie Chromatography Data System, in
the Systems tab. In this tab, the Overview part will show the
synopsis of the system with some parameters displayed
(temperature, flow, signal, etc.) depending on the installed
devices.
For example, the following pictures represent the synopsis
of the Varian ProStar 701 Fraction Collector:
Galaxie Configuration Manager Screen
Galaxie Chromatography Data System Screen
NOTE: Once the system has been created and correctly configured, it must be
associated with one or more projects in order to start some acquisitions. For
more details about the creation and configuration of a system, refer to the
Galaxie Configuration Manager User’s Guide.
Click on the button to print the current configuration.
ProStar 701 Fraction Collector Control Manual - 7 - 03-914947-27:2
Building a Method
Creating a New Method
The method contains parameters for instrument control, data
acquisition, chromatogram processing, and editing of final
results. To initially set up a method, it is not necessary to define
all of the sub-method sections; however, you must fill in the
instrument control section prior to starting an acquisition.
1. To create a new method, select the FILE / NEW METHOD
option from the Galaxie Chromatography Data System main
menu.
A wizard guide will appear and provide assistance during
the first steps of method creation:
ProStar 701 Fraction Collector Control Manual - 8 - 03-914947-27:2
2. Choose the system (chromatograph) associated with the
method. A method is created for a particular system. When
starting an acquisition, the name of the system that
performs the acquisition must be correct, since method
access is limited only to those methods associated with this
system.
3. Once this field is completed, click on the Next button to
move to the second step of the method creation:
ProStar 701 Fraction Collector Control Manual - 9 - 03-914947-27:2
4. Enter the New Method Name in the first field. In the
Description field, enter information concerning the method
(optional).
5. Once these two fields have been completed, click on the
OK button. The new method is created and is opened with
default parameters in the Galaxie Chromatography Data
System. The next step is the definition of each of the
method sections.
The instrument control section must be defined in order to
start an acquisition. In the following part of this guide, only
the control section for the Varian ProStar 701 Fraction
Collector is detailed. Other parameters such as Injection
Volume, Vial and Rack number may be necessary and are
defined in the acquisition section.
NOTE: For more details about the programming of each method section, turn to the
Galaxie Chromatography Data System User’s Guide.
Inhaltsverzeichnis
Andere Varian Laborausrüstung Handbücher
Varian
Varian ProStar 430 Versionshinweis
Varian
Varian PROSTAR 210 Bedienungsanleitung
Varian
Varian Saturn 2000 GC/MS Bedienungsanleitung
Varian
Varian 4000 GC Bedienungsanleitung
Varian
Varian 450-GC Bedienungsanleitung
Varian
Varian GC 3800 Handbuch
Varian
Varian 1200 LC/MS Bedienungsanleitung
Varian
Varian archon Bedienungsanleitung
Varian
Varian ProStar 400 Bedienungsanleitung
Varian
Varian ProStar 400 Versionshinweis
Varian
Varian CP-3800 GC Stücklistenhandbuch
Varian
Varian 210-MS Bedienungsanleitung
Varian
Varian 900-LC Series Gebrauchs- und Pflegehandbuch
Varian
Varian 920-LC Bedienungsanleitung
Varian
Varian 3900GC Handbuch
Varian
Varian ProStar 510 Versionshinweis
Varian
Varian Saturn 2000 GC/MS Bedienungsanleitung
Varian
Varian Cary 5000 Bedienungsanleitung
Varian
Varian ProStar Bedienungsanleitung
Varian
Varian 900-LC Series Stücklistenhandbuch
Beliebte Laborausrüstung Handbücher anderer Marken
Agilent Technologies
Agilent Technologies 5800 ICP-OES Bedienungsanleitung
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Bedienungsanleitung
NI
NI PXI-5422 Handbuch
Collomix
Collomix Aqix Bedienungsanleitung
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung
Ocean Insight
Ocean Insight FLAME-NIR+ Bedienungsanleitung
Parker
Parker ALIGN-MG-NA Bedienungsanleitung
BD
BD 644787 Bedienungsanleitung
DENTAURUM
DENTAURUM Compact Megaplus Bedienungsanleitung
Biuged Laboratory Instruments
Biuged Laboratory Instruments BGD 626 Bedienungsanleitung
VWR
VWR SAS Super IAQ Bedienungsanleitung
illumina
illumina MiSeqDx Bedienungsanleitung