Vax RAPID POWER 2 Bedienungsanleitung

DEEP CLEANING RESULTS

WITH 5 SPINSCRUB BRUSHES

LET’S GET STARTED.

CDCW-RPXL

CDCW-RPXLR

SAFETY GUIDE

BASIC SAFETY PRECAUTIONS

This machine is intended for household use only and NOT for commercial or

industrial use.

PLEASE KEEP INSTRUCTIONS FOR FURTHER USE AND USE ONLY AS

INSTRUCTED IN THIS GUIDE.

• This machine is intended for indoor cleaning and vehicle interiors during dry

weather conditions.

• Keep fingers, hair and loose clothing away from moving parts and openings

whilst using the machine.

• Before using the machine test your carpets/rugs/upholstery for colourfastness

and pile distortion.

• This machine is not intended to be used or cleaned by persons with reduced

physical, sensory or mental capabilities, or lack of experience or knowledge,

unless they have been given instructions concerning the safe use of the appliance

by a person legally responsible for their safety. They should be supervised whilst

using the appliance. Children shall not use, clean or play with this appliance,

which when not in use should be secured out of their reach.

• Only VAX recommended tools and solution should be used with this machine.

Using other solutions may invalidate the guarantee.

DON’TS

• Don’t leave the machine plugged in when unattended.

• Don’t use the machine if it has been dropped, damaged or left outdoors.

• Don’t run over the power cord or use the machine if the power cord or plug is

damaged. If the power cord is damaged, it must be replaced by a qualified person

in order to avoid a hazard.

• Don’t use the machine to pick up any flammable or combustible materials

(lighter fluid, petrol, kerosene etc.) or use the machine in an area with explosive

vapours or liquid.

• Don’t handle the plug or use the machine with wet hands.

• Don’t pull or carry the machine by the power cord.

• Don’t use the machine to pick up hot coals, cigarette butts, matches or smoking

hot burning items or use in an area where there may be harmful fluids

(chlorine, bleach and ammonia drain cleaner).

• Don’t use the power cord as a handle, pull the power cord around corners or

sharp edges, or close a door over the power cord.

• Don’t unplug the machine by pulling on the power cord.

• Don’t carry the machine while it’s switched on.

• Don’t attempt to remove blockages with sharp objects as this may cause

damage to the machine. Remove blockages only as instructed in this guide.

• Don’t use the machine with incorrect voltage as this may result in damage or

injury to the user. The correct voltage is listed on the ratings label.

• Don't over saturate your flooring. Always finish on a dry stroke.

• Don’t use on a surface that is damaged, uneven or incorrectly fitted.

DO'S

• Check with the manufacturer of your flooring prior to using the machine.

• Always vacuum your flooring thoroughly before using the machine.

• Test all carpets/rugs/upholstery before full usage. Run the machine over a small

hidden area. If no damage or pile distortion occurs continue cleaning.

• The clean water tank should be filled with warm water (max 40°C) only.

Filling the clean water tank with hot or boiling water will damage the machine

and invalidate the guarantee.

• Always replace the fuse in the plug with a British 13amp fuse.

• Always unplug the machine before carrying out any maintenance and before

connecting or disconnecting the hose/accessories.

• Always check the machine, tools and accessories are free from damage,

dirt/debris before using.

• Take extra care when cleaning on the stairs.

• Always protect the power cord from heated surfaces or near open flames.

• Turn off all controls on the machine before disconnecting or connecting the

power cord. After use always wrap the power cord around the cord clips

provided.

• Always keep the power cord away from the brushes whilst using the machine.

• Use only CE approved 13amp extension cords, non-approved extension cords

may overheat. Care should be taken to arrange the extension cord as it can be

a trip hazard.

• Always use the machine with all water tanks and filters in place.

• Keep all openings clear and free from debris as this may affect the airflow/

suction/water pick up.

• Always use the machine in an upright position. To prevent motor damage from

dirty water, never hold the machine upside down or on its side.

• Store the machine in a cool, dry area. Before storing the machine please ensure

all water/solutions tanks are empty and filters are thoroughly clean and dry.

WARRANTY & TECHNICAL

VAX Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK.

WARRANTY

If a VAX machine is used in the way it is intended and it breaks down within the

guarantee period, it’s our responsibility to repair or replace it.

Here’s what isn’t covered:

• Functional parts, tools and accessories after 12 months that may suffer

premature failure due to every day wear and tear.

• Consumables after 3 months such as belts, filters, brushbars, fuses etc.

• Accidental damage.

• Cosmetic damage that does not affect the functioning of the product.

• Damage as a result of use not in accordance with the user guide.

• Damage caused by not carrying out regular maintenance.

• Damage to the cord.

• Blockages; please refer to the user guide.

• Poor product performance caused by:

- Negligent use, misuse or careless operation of the machine.

- Failure to clean or maintain the product in accordance with the user guide.

- Use of the machine which is not in accordance with the user guide.

- Use of a VAX product for anything other than normal domestic household

purposes in the country in which it was purchased.

- Use of parts, accessories and consumables, which are not genuine VAX

components.

- Faulty installation or repairs - unless carried out by a qualified electrician or

engineer.

TECHNICAL

Statement of Compliance: Manufacturer/EU importer: VAX Limited, hereby on our

own responsibility, declare that the VAX Rapid Power 2 and VAX Rapid Power 2

Reach are manufactured in compliance with the following Directives:

Safety: 2014/35/EU Low Voltage Directive/Electrical Equipment (Safety)

Regulations 2016. EMC: 2014/30/EU Electromagnetic Compatibility Directive/

Electromagnetic Compatibility Regulations 2016.

Waste electrical products should not be disposed of with household

waste. Please recycle where facilities exist. Check with your Local

Authority or retailer for recycling advice.

VAX is a trade mark of Techtronic Cordless GP.

CONTENTS

Safety guide 2 - 3

Warranty & technical 4

Getting in touch 6

Getting to know your machine 7

Getting started 8

Using your machine 9 - 13

Maintenance & cleaning 14 - 16

Accessories 17

What to do if it goes wrong 18

VAX Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK.

Standard tools included with your machine

2.5m Hose

3.5m Hose

SpinScrub

hand tool

Accessory Bag x1 250ml

Platinum Antibacterial

Solution

Crevice Tool

Rapid Power 2 Reach

All standard tools, plus

Rapid Power 2

All standard tools, plus

Nozzle

cleaning tool

Upholstery

wash tool

Pet tool

GETTING IN TOUCH

Thank you for buying this VAX Rapid Power 2.

Taking care of your carpets

The Rapid Power 2 is designed to make washing carpets regularly, as effective and efficient as

possible and this user guide will help you get the most out of your machine.

Maintaining your carpets will ensure they keep their appearance for longer and smell fresh and

clean. You’ve chosen carpets for your home for a reason and VAX will help you take good care

of them.

Taking care of your Rapid Power 2

Also inside this guide are instructions on maintaining your new machine, so that it’s always ready

when you are to tackle your carpets.

Receive your FREE 2 year guarantee†

vax.co.uk/registration

We’re here if you need us

Visit our online support:

support.vax.co.uk

Still need to get in touch?

Our UK based Customer Care Team are here to support you.

For help with assembly, operational or performance problems, or buying and fitting new accessories,

you can find all our contact details at vax.co.uk/contact

This user guide can be found online at support.vax.co.uk

† Registration required. Terms and conditions apply, see vax.co.uk for details.

1Handle

2Water/Solution trigger (hidden)

3Clean water tank release handle

4Clean water tank cap

5Clean water tank

6Dirty water tank release handle

7Dirty water tank

8Hose connection port cover

9Nozzle

10 Spinscrub brushes

11 Quick release cord hook

12 Solution tank

13 Cord hook

14 Quick/Deep clean mode dial

15 Carry handle

16 On/Off pedal

17 Recline handle release pedal

Subject to technical change without notice. Images are illustrative only.

To purchase accessories and consumables visit: vax.co.uk

TECHNICAL SPECIFICATION

Name VAX Rapid Power 2

Code CDCW-RPXL

Cord length 8m

Weight 8.94kg

Wattage: See rating label on machine for details.

Voltage: 220-240V.

VAX Rapid Power 2 Reach

CDCW-RPXLR

9.08kg

See rating label on machine for details.

220-240V.

GETTING TO KNOW YOUR MACHINE

14 15

IMPORTANT: Carpets should be dry vacuumed thoroughly before washing.

• Test for colourfastness - Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/rugs/

upholstery, gently rub with the dampened cloth. Wait ten minutes and check for colour removal or bleed with a white

paper towel or cloth. Check all carpets/rugs/upholstery material before first use and if your carpet has more than one

colour, check all colours.

• Test all flooring/carpets/rugs before first usage. Run the machine over a small hidden area. If no damage or pile

distortion occurs continue cleaning.

• When using the machine, basic safety precautions should always be observed. Do not over saturate your carpets and

continue using dry strokes until little water is visibly passing through the nozzle. When using the hose and tools always

finish on a dry stroke.

• When cleaning an entire room, move furniture out of the area to be cleaned. If the furniture cannot be moved, place

aluminium foil or wax paper under the legs. This will prevent wood finishes from staining your carpet. Pin up furniture

skirts and curtains.

• Only use VAX carpet solution. Using other solutions may cause excess foaming and will invalidate the guarantee.

• For heavily soiled areas, it may be necessary to repeat the cleaning process. Make criss-crossing strokes across the

original pattern and overlap with each pass.

• The clean water tank should only be filled with warm water (max 40�C). Filling the clean water tank with hot/boiling

water will damage your machine and invalidate the guarantee.

• Empty and rinse out clean and dirty water tanks and leave to air dry before storage. Do not leave solution stored in the

tanks between uses.

• This is a powerful machine, before plugging in make sure all controls are turned off and hold the machine firmly when

starting and during use.

PLEASE READ THE SAFETY PRECAUTIONS ON PAGES 2 & 3 BEFORE USE.

GETTING STARTED

Assembly

Stand the base of the

machine on the floor in the

upright position.

Align the clean water

tank with the body of the

machine. Slide it down and

press firmly into place.

Slide and push the solution

tank firmly into the machine.

Push the handle onto the

extension pole until it clicks

into place. Slide the handle

into the main body, it will

click when correctly fitted.

USING YOUR MACHINE

Filling the solution tank

Fill the solution tank with the

Vax carpet cleaning solution.

Pull up the solution tank

and lift to remove.

Twist the clean water

tank cap anti clockwise

and remove.

Pull and lift to remove the

clean water tank.

IMPORTANT: Screw the solution tank cap tightly when refitting. Do not leave the solution stored in the tanks between uses.

Unused solution can be poured back into the bottle.

Filling the clean water tank

Fill the clean water tank

with warm water (max

40�C). Replace the cap and

twist clockwise to tighten.

To replace the clean water

tank, align the back of the

clean water tank with the

body of the machine. Slide

it down and press firmly

into place.

Twist the solution tank cap

anti clockwise and remove.

Twist the solution tank cap

clockwise until tight.

To replace, slide and push

the solution tank firmly

into the machine.

40°C

MAX

USING YOUR MACHINE

Operation

Plug into the mains and

press the On/Off pedal to

switch on.

Press the handle release

pedal and pull the handle

backwards to recline

the machine.

Choose the cleaning mode by turning the dial.

1. Quick Clean Mode:

Best for a quick, surface clean - carpets dry in less

than an hour.

2. Deep Clean Mode:

Best overall results for a thorough, deep clean.

Clip the cord into the

cord hook so that the

cord does not get pulled,

caught or tangled under

the machine.

Squeeze the trigger to

release the solution and

water mix.

IMPORTANT: Carpets should be dry vacuumed thoroughly before washing. For heavily soiled areas, it may be necessary to

repeat the cleaning process. Make criss-crossing strokes across the original pattern and overlap with each pass. Do not over

saturate the carpet. Always finish with dry strokes (trigger released) and continue using dry strokes (trigger released) until

little water is visibly passing through the tool/nozzle.

For best results apply

water/solution on the

forward stroke and

release the trigger on the

backward stroke to pick

up water/solution. For a

dryer finish, follow with an

additional dry stoke with

no trigger pressed.

CAUTION: The brushbars constantly spin when switched on and the machine is reclined. Never use on one spot for an

extended period of time as the brushbars may damage the floor surface.

1 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vax Staubsauger Handbücher

Vax

Vax AirMini C88-AM-B Bedienungsanleitung

Vax

Vax H89-12V Series Bedienungsanleitung

Vax

Vax VCU-03 Bedienungsanleitung

Vax

Vax Power 1 Series Bedienungsanleitung

Vax

Vax U85-I3-Be Montageanleitung

Vax

Vax V-100T Bedienungsanleitung

Vax

Vax MACH-5 VZL-7015AT Bedienungsanleitung

Vax

Vax W86-DP-B Bedienungsanleitung

Vax

Vax AVC 1 Produktinformationsblatt

Vax

Vax Rapide Spruce V-022 Bedienungsanleitung

Vax

Vax V-091 Bedienungsanleitung

Vax

Vax VX18 Technisches Datenblatt

Vax

Vax RapidPower PRO ECGLV1B1 Montageanleitung

Vax

Vax VZL-7022 Bedienungsanleitung

Vax

Vax VHFM700 Bedienungsanleitung

Vax

Vax Washvax V-020 Series Montageanleitung

Vax

Vax V-026 SERIES Bedienungsanleitung

Vax

Vax U89-AS series Bedienungsanleitung

Vax

Vax VC-H4510E-1/2/3 Bedienungsanleitung

Vax

Vax SpinScrub VSS7151 Bedienungsanleitung

Vax

Vax DUAL V-124 Bedienungsanleitung

Vax

Vax CCMBPNV1C1 Montageanleitung

Vax

Vax Oasis Complete V-133 Bedienungsanleitung

Vax

Vax Merlin VR230 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung