Vax W86-DP-B Montageanleitung

REFRESH TIRED CARPETS

LET’S GET STARTED.

VARIANT

DualPower

W86-DP-B

Let’s talk safety

Basic

safety

precautions

This carpet washer is intended for household use only and NOT for

commercial or industrial use.

• Only use the carpet washer indoors and keep the area you’re

cleaning well lit.

• Keep ngers, hair and loose clothing away from moving parts and

openings whilst using the carpet washer.

• This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities

Don’ts

• Don’t leave the carpet washer plugged in when unattended.

• Don’t use the carpet washer if it has been dropped, damaged or

left outdoors.

• Don’t run over the power cord or use the carpet washer if the

power cord or plug is damaged. If the supply cord is damaged, it

must be replaced by the manufacturer, its service agent or similarly

qualied persons in order to avoid a hazard.

• Don’t use the carpet washer to pick up any ammable or

combustible materials (lighter uid, petrol, kerosene etc.) or use the

carpet washer in an area with explosive vapours or liquid.

• Don’t handle the plug or use the carpet washer with wet hands.

Do’s

• Always vacuum your carpets thoroughly before using the carpet

washer.

• Check with the manufacturer of your ooring and always test in an

inconspicuous area prior to using the carpet washer.

• The clean water tank should be lled with warm water (max 40°C)

only. Filling the clean water tank with hot or boiling water will

damage the machine and invalidate the guarantee.

• Always unplug the carpet washer before carrying out any

maintenance and before connecting or disconnecting the hose/

accessories.

• Turn o all controls on the carpet washer before disconnecting or

connecting the power cord, after use always wrap the power cord

around the cord clips provided.

• Always replace the fuse in the plug with a British 13amp fuse.

Always protect the power cable from heated surfaces or near open

ames.

or lack of experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

• Before using the carpet washer test your carpets/rugs/upholstery for

colourfastness and pile distortion.

• Only Vax recommended tools and solution should be used with this carpet

washer. Using other solutions may invalidate the guarantee.

• Don’t use the carpet washer to pick up hot coals, cigarette butts, matches or

smoking hot burning items or use in an area where there may be harmful uids

(chlorine, bleach and ammonia drain cleaner).

• Don’t pull or carry the carpet washer by the power cord. Don’t use the power

cord as a handle, pull the power cord around corners, sharp edges or close

a door over the power cord. Don’t unplug the carpet washer by pulling on the

power cord.

• Don’t carry the carpet washer while it’s switched on.

• Don’t attempt to remove blockages with sharp objects as this may cause damage

to the carpet washer.

• Don’t use the carpet washer with incorrect voltage as this may result in damage

or injury to the user. The correct voltage is listed on the ratings label.

• Take extra care when cleaning on the stairs.

• Always keep the power cord away from the brushes whilst using the carpet

washer.

• Use only CE approved 13amp extension cords, non-approved extension cords may

overheat. Care should be taken to arrange the extension cord as it can be a trip

hazard.

• Always use the carpet washer with all water/solution tanks and lters in place.

• Always check accessories are free from damage, dirt and debris before use.

• Keep all openings clear and free from debris as this may aect the airow/suction.

• Always use the carpet washer in an upright position. To prevent motor damage

from dirty water, never hold the carpet washer upside down or on its side.

• Store the carpet washer in a cool, dry area. Before storing the carpet washer

please ensure all water/solutions tanks and lters are thoroughly clean and dry.

PLEASE KEEP INSTRUCTIONS FOR FURTHER USE AND USE ONLY

AS INSTRUCTED IN THIS GUIDE.

We’re here if you need us

Instead of taking your machine back to the shop,

simply visit our online support:

vax.co.uk/support

Still need to get in touch?

Our UK based Customer Care Team are here to support you.

For help with assembly, operational or performance problems, or buying and tting new accessories,

you can nd all our contact details at vax.co.uk/contact

This user guide can be found online at: vax.co.uk/support

Thank you for buying this Dual Power.

Taking care of your carpets

The Dual Power is designed to make washing carpets regularly, as eective and ecient as

possible and this user guide will help you get the most out of your machine.

Maintaining your carpets will ensure they keep their appearance for longer and smell fresh and

clean. You’ve chosen carpets for your home for a reason and Vax will help you take good care

of them.

Taking care of your Dual Power

Also inside this guide are instructions on maintaining your new machine, so that it’s always

ready when you are to tackle your carpets.

Contents

Let’s talk safety

Getting to know your machine

Getting started

Using your machine

Taking care of your machine

Let’s talk technical

What to do if it goes wrong

Getting in touch

Accessories

Notes

Included with

your machine

250ml Solution

Getting to know your machine

Name Dual Power

Code W86-DP-B

Part number 1-1-133625-00

Voltage 220-240V~50Hz

Wattage 800w

Cord length 8m

Weight 6.2kg

Technical Specication

Subject to technical change without notice.

On/o pedal

Power cable

Solution trigger (hidden)

Carry handle

Handle

Clean water tank

Clean water tank release button

Dirty water tank handle

Dirty water tank

Dual rotating

brushbars

Cord storage hooks

Handle release

pedal

Wheels

Cord storage hooks

PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE

Getting started

To secure the upper handle screw and tighten

with a cross/at head screwdriver.

Stand base in upright

position and lower the

top section until it clicks

securely connecting on

to the base.

Slide handle down

onto unit until it clicks

securely.

Assemble the two lower handle screws and tighten

with a cross/at head screwdriver.

Assembling your carpet washer

TIP

When cleaning an entire room,

move furniture out of the area

to be cleaned. If the furniture

is too heavy to move, place

aluminium foil or wax paper

under legs. This will prevent

wood nishes from staining

your carpet. Pin up furniture

skirts and curtains.

IMPORTANT: Carpets should be dry vacuumed thoroughly before washing.

Test for colourfastness – Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/rugs/

upholstery gently rub with the dampened cloth. Wait ten minutes and check for colour removal or bleed with a white paper

towel or cloth. If your carpet has more than one colour, check all colours.

Test your carpet/rugs/upholstery – Run the carpet washer over a small hidden area. If no pile distortion occurs continue

cleaning.

When cleaning an entire room, move furniture out of the area to be cleaned. If the furniture cannot be moved, place

aluminium foil or wax paper under the legs. This will prevent wood nishes from staining your carpet. Pin up furniture skirts

and curtains.

When using the carpet washer, basic safety precautions should always be observed and don’t over saturate your carpets.

Only use Vax carpet solution. Using other solutions may cause excess foaming and will invalidate your guarantee. The clean

water tank should only be lled with warm water (max 40°C). Filling the clean water tank with hot/boiling water will damage

your machine and invalidate the guarantee. This is a powerful carpet washer, before plugging in make sure all controls are

turned o. Hold carpet washer rmly when staring and during use.

Using your machine

Operating your carpet washer

Remove the clean water tank. Unscrew the clean water

tank cap from the top of

the clean water tank.

Pour required dose of carpet

cleaning solution (approx.40ml

per 1.0L of water) and pour

into tank.

The dirty water tank is tted with a oat. When the dirty water tank is full or the oorhead is not in contact with the

carpet the oat will shut o the suction at the oor nozzle. You will be able to hear if this has happened as the motor

noise on the unit will increase. Once the oat is activated, empty the dirty water tank if full. If the dirty water tank is not

full then turn o your machine at the power switch and wait for the oat to settle.

Taking care of your machine

TIP

Carpets should be dry vacuumed

thoroughly before washing.

40C

Max

Tighten cap before

returning tank to unit.

Unwrap power cord

and plug unit in.

Mix solution with warm

water (40°C Max). Fill

the clean water tank with

solution mix.

Turn the machine on.

Recline the machine. Press trigger to

release solution.

For best results apply

solution on the forward

stroke and release the

trigger to recover solution

on the backward stroke.

NOTE: If the solution/clean

water doesn’t dispense, the

clean water tank valve may

be stuck. Hold the clean

water tank over the sink and

press the valve underneath

to release.

Taking care of your machine

For large spills use the carpet washer

Turn the machine on. Recline the machine. For best results use

straight parallel strokes.

Remove dirty water tank. To empty the tank, unplug

the quick spout pour cap

and empty.

Insert dirty water tank

back into the cleaner.

Emptying the dirty water tank

Always switch o and unplug the

carpet washer from the electrical

outlet before assembling, lling

and emptying the clean water tank,

emptying the dirty water tank, or

before connecting/disconnecting

the attachments.

CAUTION

IMPORTANT: All solution must be emptied from tanks when storing the machine.

NOTE: Rinse out tank with clean water and leave to air dry before storing your machine.

Remove dirty water tank. Open quick spout pour cap and partially ll dirty water

tank with clean water and swirl around to loosen debris.

To clean dirty water tank ducting, place dirty water tank

under a tap and dispense high pressure clean water into

the inlet port of the dirty water tank to loosen debris that

has accumulated.

Allow tank to dry

completely, replace quick

spout pour cap and insert

dirty water tank back

onto unit.

Storage

Empty and rinse out clean and dirty water tanks and leave to air dry

before replacing. Do not leave solution stored in the tanks between uses.

Taking care of your machine

TIP

During normal use of cleaning,

debris may accumulate inside the

dirty water tank. In order to keep

your unit functioning properly

and to prevent any odours

building up, it is best to rinse out

your dirty water tank with fresh

water after each use.

Cleaning the dirty water tank

IMPORTANT: Be sure to remove any debris that has accumulated in the screen above the oat. If the screen becomes

clogged, this may reduce the performance of your cleaner.

For full suction it is important that the quick pour cap is securely in place. If misplaced, suction will be severely aected.

Let’s talk technical

Andere Handbücher für W86-DP-B

Inhaltsverzeichnis

Andere Vax Staubsauger Handbücher

Vax

Vax U85 Bedienungsanleitung

Vax

Vax V-051 Produktinformationsblatt

Vax

Vax VC-1002 Bedienungsanleitung

Vax

Vax WASH Vax V-020 Series Bedienungsanleitung

Vax

Vax Essentials VEU-01 Bedienungsanleitung

Vax

Vax multivax 7151 Series Bedienungsanleitung

Vax

Vax Mach Rapide XL V-027CC Bedienungsanleitung

Vax

Vax W86-DD-B, Dual Power Max Montageanleitung

Vax

Vax Mach Air Force U89-MAF Series Bedienungsanleitung

Vax

Vax Mach Air U91-MA series Bedienungsanleitung

Vax

Vax Rapide Spring Clean VCWRS700 Bedienungsanleitung

Vax

Vax Performance Cyclonic V-008SC Bedienungsanleitung

Vax

Vax C91-M4 Series Bedienungsanleitung

Vax

Vax UCNBAWP1 Montageanleitung

Vax

Vax XL Pro V-027U Bedienungsanleitung

Vax

Vax H86-S9-B Bedienungsanleitung

Vax

Vax Rapide Plus 5140 Produktinformationsblatt

Vax

Vax C85-EW Series Montageanleitung

Vax

Vax V-093TT Bedienungsanleitung

Vax

Vax Rapide Supreme V-023 Bedienungsanleitung

Vax

Vax V-303 Wash "N' Dry Bedienungsanleitung

Vax

Vax VZ-701 Bedienungsanleitung

Vax

Vax Force2 Bedienungsanleitung

Vax

Vax V-077 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung