Vaxcel T0040 Gebrauchsanweisung

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0040

1. Thread two headless screws to the mounting plate, and secure them with four lock nuts (two on each side of

the mounting plate). Adjust the length of the headless screws if necessary.

2. Attach the mounting plate to the outlet box by using two mounting screws.

3. Install bulbs from the front of the metal frame (not included). See relamping label at socket area or packaging

for maximum allowed wattage. (See Fig.1)

Glass Panel

Fig.2

Metal Frame

Fixture

Glass Panel (H)

Bulb Type A Max.100W

(not included)

Back Plate

Clip

Ball Nut (F)

Wire Nut

Mounting Screw (E)

Headless Screw (D)

Mounting Plate (A)

House Grounding Wire

Green Grounding Screw (G)

Fixture Grounding Wire

Wire Nut (C)

Outlet Box Fixture Wire

Lock Nut (B) Rubber Pad (I)

Parts:

Photocell

IMPORTANT:

The sensor has an excellent photocell function

to enable the light to turn on at dusk and off at

dawn automatically.

121121

Parts Number (4600MM) Parts Number (9386SC)

Mounting Screw (E)

Green Grounding

Screw (G)

Lock Nut (B)

Wire Nut (C)

Glass Panel (H) (X3)

Mounting Plate (A)

Headless Screw (D) Ball Nut (F)

notch

Fig.3

Rubber Pad (I)

Fig.1

4. Take a glass panel and gently slide the glass panel upward into the notch inside of the metal frame in place,

secure it by pressing the clips from bottom sides. (See Fig.2 & Fig.3) Repeat with other panels.

5. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections by using

the wire nuts:

---Connect the black (hot) wire from the fixture to the black (hot) wire from the power source.

---Connect the white (neutral) wire from the fixture to the white (neutral) wire from the power source.

---Attach the fixture grounding wire to the mounting plate with the green grounding screw. Then connect it to

the house grounding wire with a wire nut.

Carefully put the wires back into the outlet box.

6. Attach the back plate to the mounting plate by inserting the headless screws, then secure it with rubber

pads and ball nuts.

CAUTION: With silicone caulking compound, caulk completely around where the back plate meets

with the wall surface to prevent water from seeping into the outlet box.

7. Turn on the power at the main fuse or circuit breaker box.

121121

1. Turn off the power at the main fuse or circuit breaker box before starting installation.

2. Loosen the wire nuts connected with the wires from photocell. (See Fig.1)

Note: Do not move the photocell to prevent water from seeping into the outlet box.

3. Take a white pigtail and black pigtail and make wire connections using wire nuts: (See Fig.2)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the back plate of the fixture.

4.Turn on the power at the main fuse or circuit breaker box

Photocell

White Wires From Photocell

Wire Nuts

Wires From Fixture

Wires From

Main Power

Wire Nut

White Pigtail

Pigtail

Red Wires From Photocell

Black Wires From Photocell

Operation the Unit Without Photocell

Fig.1 Fig.2

121121

A: 7-3/4"

B: 19-1/2"

C: 6"

Inhaltsverzeichnis

Andere Vaxcel Außenleuchte Handbücher

Vaxcel

Vaxcel T0442 Gebrauchsanweisung

Vaxcel

Vaxcel Lambda T0627 Gebrauchsanweisung

Vaxcel

Vaxcel T0620 Gebrauchsanweisung

Vaxcel

Vaxcel T0321 Gebrauchsanweisung

Vaxcel

Vaxcel T0350 Gebrauchsanweisung

Vaxcel

Vaxcel T0496 Gebrauchsanweisung

Vaxcel

Vaxcel T0178 Gebrauchsanweisung

Vaxcel

Vaxcel T0568 Gebrauchsanweisung

Vaxcel

Vaxcel T0258 Gebrauchsanweisung

Vaxcel

Vaxcel T0099 Gebrauchsanweisung

Vaxcel

Vaxcel T0702 Gebrauchsanweisung

Vaxcel

Vaxcel T0142 Gebrauchsanweisung

Vaxcel

Vaxcel T0698 Gebrauchsanweisung

Vaxcel

Vaxcel T0130 Gebrauchsanweisung

Vaxcel

Vaxcel T0698 Gebrauchsanweisung

Vaxcel

Vaxcel T0193 Gebrauchsanweisung

Vaxcel

Vaxcel T0551 Gebrauchsanweisung

Vaxcel

Vaxcel T0103 Gebrauchsanweisung

Vaxcel

Vaxcel T0297 Gebrauchsanweisung

Vaxcel

Vaxcel T0364 Gebrauchsanweisung

Vaxcel

Vaxcel Chatham Gebrauchsanweisung

Vaxcel

Vaxcel T0244 Gebrauchsanweisung

Vaxcel

Vaxcel Mission T0437 Gebrauchsanweisung

Vaxcel

Vaxcel T0396 Gebrauchsanweisung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung