Vaxcel T0062 Gebrauchsanweisung

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0062

House Grounding Wire

Green Grounding Screw (C)

Wire Nut (E)

Mounting Screw (B)

Headless Screw (D)

Outlet Box

Fixture Wire

Lock Nut (F) Back Plate

Ball Nut (G)

Bulb Type A Max.100W

(not included)

Mounting Plate (A)

Rubber Pad (H)

Parts:

130606

Parts Number (4752MM)

Parts Number (7047PC)

Mounting Screw (B)

Green Grounding

Screw (C)

Lock Nut (F)

Wire Nut (E)

Photocell (I) (X1)

Mounting Plate (A) Ball Nut (G)

Metal Frame

Headless Screw (D)

Parts Number (9454CS)

Glass Panel (J) (X3)

Rubber Pad (H)

Photocell (I)

IMPORTANT:

The sensor has an excellent photocell function

to enable the light to turn on at dusk and off at

dawn automatically.

Loop

Nipple

Glass Panel (J)

Fig. 1 Clip

1. Thread two headless screws through the mounting plate, then secure them with four lock nuts (two

on each side of the mounting plate). Adjust the length of the headless screws if necessary.

Note: Make sure that the headless screws are lined up horizontally, to ensure that the fixture will be

level.

2. Attach the mounting plate to the outlet box by using two mounting screws.

Fixture Grounding Wire

130606

1. Turn off the power at the main fuse or circuit breaker box before starting installation.

2. Loosen the wire nuts connected with the wires from photocell. (See Fig.2)

Note: Do not move the photocell to prevent water from seeping into the outlet box.

3. Take a white pigtail and black pigtail and make wire connections using wire nuts: (See Fig.3)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the back plate of the fixture.

Photocell

White Wires From Photocell

Wire Nuts

Wires From Fixture

Wires From

Main Power

Wire Nut

White Pigtail

Pigtail

Red Wires From Photocell

Black Wires From Photocell

Operation the Unit Without Photocell

Fig.2 Fig.3

3. Take a glass panel and gently slide the narrow side of the glass panel down into the metal frame

in place, secure it by pressing the clips from both top and bottom sides. (See Fig.1) Repeat with

other panels.

4. Secure the loop to the nipple of the fixture.

5. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections

using the wire nuts:

---Connect the black (hot) wire from the fixture to the black (hot) wire from the power source.

---Connect the white (neutral) wire from the fixture to the white (neutral) wire from the power

source.

---Attach the fixture grounding wire to the mounting plate with the green grounding screw. Then

connect it to the house grounding wire with a wire nut.

Carefully put the wires back into the outlet box.

6. Attach fixture to the wall by aligning fixture mounting screws on mounting plate with holes on back

plate. Slide fixture mounting screws through holes, secure them with two rubber pad and ball nuts.

7. With silicone caulking compound, caulk completely around where the back plate meets with the

wall surface.

CAUTION: Be sure to caulk completely where the back plate meets the wall surface to

prevent water from seeping into the outlet box.

8. Install a bulb (not included). See relamping label at socket area or packaging for maximum

allowed wattage.

9. Turn on the power at the main fuse or circuit breaker box.

130606

A: 9"

B: 18"

C: 11"

Andere Vaxcel Außenleuchte Handbücher

Vaxcel

Vaxcel T0350 Gebrauchsanweisung

Vaxcel

Vaxcel T0517 Gebrauchsanweisung

Vaxcel

Vaxcel T0274 Gebrauchsanweisung

Vaxcel

Vaxcel T0395 Gebrauchsanweisung

Vaxcel

Vaxcel T0694 Gebrauchsanweisung

Vaxcel

Vaxcel T0321 Gebrauchsanweisung

Vaxcel

Vaxcel T0620 Gebrauchsanweisung

Vaxcel

Vaxcel T0476 Gebrauchsanweisung

Vaxcel

Vaxcel T0178 Gebrauchsanweisung

Vaxcel

Vaxcel T0692 Gebrauchsanweisung

Vaxcel

Vaxcel T0241 Gebrauchsanweisung

Vaxcel

Vaxcel T0696 Gebrauchsanweisung

Vaxcel

Vaxcel T0575 Gebrauchsanweisung

Vaxcel

Vaxcel T0479 Gebrauchsanweisung

Vaxcel

Vaxcel T0142 Gebrauchsanweisung

Vaxcel

Vaxcel T0461 Gebrauchsanweisung

Vaxcel

Vaxcel T0637 Gebrauchsanweisung

Vaxcel

Vaxcel T0080 Gebrauchsanweisung

Vaxcel

Vaxcel T0181 Gebrauchsanweisung

Vaxcel

Vaxcel T0692 Gebrauchsanweisung

Vaxcel

Vaxcel T0624 Gebrauchsanweisung

Vaxcel

Vaxcel T0238 Gebrauchsanweisung

Vaxcel

Vaxcel Chatham Gebrauchsanweisung

Vaxcel

Vaxcel T0616 Gebrauchsanweisung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung