Vaxcel T0085 Gebrauchsanweisung

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0085

Back Plate

Ball Nut (G)

Bulb Type B Max.60W

(not included)

Rubber Pad (H)

Parts:

140324

Parts Number (5007MM)

Mounting Screw (B)

Green Grounding

Screw (C)

Lock Nut (F)

Wire Nut (E)

Cross Bar (A) Ball Nut (G)

Metal Frame

Headless Screw (D)

Parts Number (9575CE)

Rubber Pad (H)

Photocell

IMPORTANT:

The sensor has an excellent photocell function

to enable the light to turn on at dusk and off at

dawn automatically.

Ball Nut Assembly

Fixture

Exterior Glass Shade (J)

Cross Bar (A)

House Grounding Wire

Green Grounding Screw (C)

Fixture Grounding Wire

Wire Nut (E)

Outlet Box

Fixture Wire

Mounting Screw (B)

Lock Nut (F)

Headless Screw (D)

Parts Number (9576AM)

Interior Glass Shade (I)

Clip

Fig. 1

Metal Frame

Clip

Glass Holder

Exterior Glass Shade (J)

Interior Glass Shade (I)

WARNING: Turn off the main power at circuit breaker before installing fixture.

AVERTISSEMENT: Coupez la source d’alimentation principale au panneau

central de disjoncteurs avant d’installer le luminaire.

140324

1. Turn off the power at the main fuse or circuit breaker box before starting installation.

2. Loosen the wire nuts connected with the wires from photocell. (See Fig.2)

Note: Do not move the photocell to prevent water from seeping into the outlet box.

Photocell

White Wires From Photocell

Wire Nuts

Wires From Fixture

Wires From

Main Power

Wire Nut

White Pigtail

Pigtail

Red Wires From Photocell

Black Wires From Photocell

Operation the Unit Without Photocell

Fig.2 Fig.3

1. Thread two headless screws through the cross bar, then secure them with four lock nuts (two on

each side of the cross bar). Adjust the length of the headless screws if necessary.

Note: Make sure that the headless screws are lined up horizontally, to ensure that the fixture will

be level.

2. Attach the cross bar to the outlet box by using two mounting screws.

3. Place the exterior glass shade into the metal frame carefully, and then secure it by pressing the

clips from the top sides. (See Fig.1)

Note: Slide the outer glass shade downward into the notch inside of the metal frame.

4. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections

using the wire nuts:

---Connect the black (hot) wire from the fixture to the black (hot) wire from the power source.

---Connect the white (neutral) wire from the fixture to the white (neutral) wire from the power source.

---Attach the fixture grounding wire to the cross bar with the green grounding screw. Then connect

it to the house grounding wire with a wire nut.

Carefully put the wires back into the outlet box.

5. Attach the back plate to the cross bar by inserting the headless screws, then secure it with rubber

pads and two ball nuts.

Note: With silicone caulking compound, caulk completely around where the back plate

meets with the wall surface to prevent water from seeping into the outlet box.

6. Install a bulb (not included). See relamping label at socket area or packaging for maximum

allowed wattage.

7. Attach the interior glass shade to the glass holder and turn it clockwise until it locks in place.

Note: Do not over tighten.

8. Attach the metal frame to the fixture, then secure it with the ball nut assemblies.

9. Turn on the power at the main fuse or circuit breaker box.

140324

A: 6-1/2"

B: 10-1/2"

C: 8"

3. Take a white pigtail and black pigtail and make wire connections using wire nuts: (See Fig.3)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the back plate of the fixture.

Andere Vaxcel Außenleuchte Handbücher

Vaxcel

Vaxcel Proline T0429 Gebrauchsanweisung

Vaxcel

Vaxcel T0076 Gebrauchsanweisung

Vaxcel

Vaxcel T0717 Gebrauchsanweisung

Vaxcel

Vaxcel T0701 Gebrauchsanweisung

Vaxcel

Vaxcel T0696 Gebrauchsanweisung

Vaxcel

Vaxcel T0694 Gebrauchsanweisung

Vaxcel

Vaxcel T0626 Gebrauchsanweisung

Vaxcel

Vaxcel T0542 Gebrauchsanweisung

Vaxcel

Vaxcel T0595 Gebrauchsanweisung

Vaxcel

Vaxcel T0669 Gebrauchsanweisung

Vaxcel

Vaxcel Lambda T0627 Gebrauchsanweisung

Vaxcel

Vaxcel T0241 Gebrauchsanweisung

Vaxcel

Vaxcel T0694 Gebrauchsanweisung

Vaxcel

Vaxcel T0365 Gebrauchsanweisung

Vaxcel

Vaxcel T0692 Gebrauchsanweisung

Vaxcel

Vaxcel T0620 Gebrauchsanweisung

Vaxcel

Vaxcel T0503 Gebrauchsanweisung

Vaxcel

Vaxcel T0521 Gebrauchsanweisung

Vaxcel

Vaxcel T0350 Gebrauchsanweisung

Vaxcel

Vaxcel T0692 Gebrauchsanweisung

Vaxcel

Vaxcel T0103 Gebrauchsanweisung

Vaxcel

Vaxcel T0112 Bedienungsanleitung

Vaxcel

Vaxcel T0142 Gebrauchsanweisung

Vaxcel

Vaxcel T0575 Gebrauchsanweisung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung