Vega VEGAPULS 62 Bedienungsanleitung

Operating Instructions

VEGAPULS 62

4... 20 mA/HART

Contents

1About this document

1.1Function ............................. 5

1.2Target group .......................... 5

1.3Symbolism used ....................... 5

2For your safety

2.1Authorised personnel.................... 6

2.2Appropriate use........................ 6

2.3Warning about misuse ................... 6

2.4CE conformity ......................... 6

2.5Compatibility acc.to NAMUR NE 53......... 7

2.6FCC/IC-Conformity (only for USA/Canada).... 7

2.7Safety information for Ex areas............. 8

2.8Manufacturer declaration ................. 8

2.9Environmental instructions ................ 9

3Product description

3.1Conﬁguration.......................... 10

3.2Principle of operation.................... 11

3.3Adjustment ........................... 12

3.4Storage and transport ................... 12

4Mounting

4.1General instructions..................... 14

4.2Mounting preparations -Horn antenna ....... 15

4.3Mounting preparations -Parabolic antenna .... 16

4.4Mounting information .................... 17

4.5Mounting information .................... 18

5Connecting to power supply

5.1Preparing the connection ................. 25

5.2Connection procedure -Instrument housing.... 26

5.3Wiring plans,single chamber housing........ 27

5.4Wiring plans,double chamber housing ....... 29

5.5Wiring plans,double chamber housing Exd.... 31

5.6Wiring plans,version IP 66/IP 68,1bar ...... 33

5.7Switch-on phase ....................... 33

6Setup with the indicating and adjustment module

PLICSCOM

6.1Short description ....................... 34

6.2Installing the indicating and adjustment module

PLICSCOM ........................... 34

2VEGAPULS 62 -4... 20 mA/HART

Contents

28435-EN-060317

6.3Adjustment system ..................... 35

6.4Adjustment system ..................... 36

6.5Setup procedure ....................... 37

6.6Menu schematic ....................... 43

6.7Saving the parameter adjustment data ....... 46

7Setup with PACTware™and other adjustment

programs

7.1Connecting the PC ..................... 47

7.2Parameter adjustment with PACTware™...... 48

7.3Parameter adjustment with AMS™and PDM .. 49

7.4Saving the parameter adjustment data ....... 49

8Maintenance and fault rectiﬁcation

8.1Maintenance .......................... 50

8.2Fault rectiﬁcation ....................... 50

8.3Exchange of the electronics module ......... 51

8.4Instrument repair ....................... 52

9Dismounting

9.1Dismounting procedure .................. 54

9.2Disposal ............................. 54

10 Supplement

10.1Technical data......................... 55

10.2Dimensions ........................... 70

10.3Industrial property rights.................. 78

VEGAPULS 62 -4... 20 mA/HART 3

Contents

28435-EN-060317

Supplementary operating instructions manuals

Information:

VEGAPULS 62 is available in diﬀerent versions and is

supplied speciﬁcally acc.to the order.Depending on the

selected version,supplementary operating instructions man-

uals come with the shipment.The supplementary operating

instructions are stated in paragraph "Product description".

Operating instructions manuals for accessories and

replacement parts

Tip:

To ensure reliable setup and operation of your VEGAPULS 62,

VEGA oﬀers accessories and replacement parts.The corre-

sponding documentations are:

lOperating instructions manual "External indicating and

adjustment unit VEGADIS 61"

lOperating instructions manual "Oscillator VEGAPULS

series 60"

lSupplementary instructions manual "Antenna impedance

cone VEGAPULS 62 and 68"

lSupplementary instructions manual "Flanges acc.to DIN-

EN-ASME-JIS"

4VEGAPULS 62 -4... 20 mA/HART

Contents

28435-EN-060317

1About this document

1.1Function

This operating instructions manual has all the information you

need for quick setup and safe operation.Please read this

manual before you start setup.

1.2Target group

This operating instructions manual is directed to trained,

qualiﬁed personnel.The contents of this manual should be

made available to these personnel and put into practice by

them.

1.3Symbolism used

Information,tip,note

This symbol indicates helpful additional information.

Caution:If this warning is ignored,faults or

malfunctions can result.

Warning:If this warning is ignored,injury to persons and/or

serious damage to the instrument can result.

Danger:If this warning is ignored,serious injury to persons

and/or destruction of the instrument can result.

Ex applications

This symbol indicates special instructions for Ex applications.

lList

The dot set in front indicates a list with no implied sequence.

àAction

This arrow indicates a single action.

1Sequence

Numbers set in front indicate successive steps in a procedure.

VEGAPULS 62 -4... 20 mA/HART 5

About this document

28435-EN-060317

2For your safety

2.1Authorised personnel

All operations described in this operating instructions manual

must be carried out only by trained specialist personnel

authorised by the operator.For safety and warranty reasons,

any internal work on the instruments must be carried out only

by personnel authorised by the manufacturer.

2.2Appropriate use

VEGAPULS 62 is a sensor for continuous level measurement.

Detailed information on the application range of VEGAPULS

62 is available in chapter "Product description".

2.3Warning about misuse

Inappropriate or incorrect use of the instrument can give rise to

application-speciﬁc hazards,e.g.vessel overﬁll or damage to

system components through incorrect mounting or adjustment.

2.4General safety instructions

VEGAPULS 62 is a high-tech instrument requiring the strict

observance of standard regulations and guidelines.The

emitting frequencies of all radar sensors are in the Cor K-band

range (depending on the instrument version). The low trans-

mitting power is far below the internationally permitted limit

values,and when used correctly,no health-endangering

eﬀects are to be expected.The instrument can also be used

without restriction on the side of metallic,closed vessels.The

user must take note of the safety instructions in this operating

instructions manual,the country-speciﬁc installation standards

(e.g.the VDE regulations in Germany)as well as all prevailing

safety regulations and accident prevention rules.

2.5CE conformity

VEGAPULS 62 is in CE conformity with EMVG (89/336/EWG),

R&TTE directive (1999/5/EC), fulﬁls NAMUR recommenda-

tion NE 21 and is in CE conformity with LVD (73/23/EWG).1)

Conformity has been judged acc.to the following standards:

1)R&TTE-Richtlinie (1999/5/EC): Not with version with increased sensitivity.

6VEGAPULS 62 -4... 20 mA/HART

For your safety

28435-EN-060317

lEMC:EN 61326:2004

-Emission:Class B

-Susceptibility:Industrial areas

lR&TTE directive:I-ETS 300-440 Expert opinion No.

0043052-02/SEE,Notiﬁed Body No.0499

lLVD:EN 61010-1:2002

2.6Compatibility acc.to NAMUR NE 53

VEGAPULS 62 meets NAMUR recommendation NE 53.

VEGA instruments are generally upward and downward

compatible:

lSensor software for DTM VEGAPULS 62 HART,PA or FF

lDTM VEGAPULS 62 for adjustment software PACTware™

ladjustment module PLICSCOM for sensor software

The parameter adjustment of the basic sensor functions is

independent of the software version.The range of available

functions depends on the respective software version of the

individual components.

The software version of VEGAPULS 62 can be determined as

follows:

lvia PACTware™

lon the type label of the electronics

lvia the indicating and adjustment module PLICSCOM

You can view all software histories on our website www.vega.

com.Make use of this advantage and get registered for update

information via e-mail.

2.7FCC/IC-Conformity (only for USA/Canada)

VEGAPULS with all antenna versions are FCC/IC approved

Unauthorized modiﬁcations could invalidate the FCC/IC

approval.Modiﬁcations must be expressly agreed to by VEGA.

The VEGAPULS 62 complies with Part 15 and RSS-210 rules.

Operation ist subject to the following conditions:

lThis device may not cause harmful interference

lThis device must accept any interference received,

including interference that may cause undesired operation.

This device has been designed to operate with the antennas

listed in the chapter "Dimensions"or without antenna and

having a maximum gain of 33 dB.Antennas not included in this

VEGAPULS 62 -4... 20 mA/HART 7

For your safety

28435-EN-060317

list or having a gain greater than 33 dBare strictly prohibited

for use with this device.The required antenna impedance is 50

Ohm.

2.8Safety information for Ex areas

Please note the Ex-speciﬁc safety information for installation

and operation in Ex areas.These safety instructions are part of

the operating instructions manual and come with the Ex-

approved instruments.

2.9Manufacturer declaration

In conformity with DIN EN 60079-14/2004,para.5.2.3,point

c1,the VEGAPULS 62 radar sensor is suitable for use in zone

The operator must use the instrument correctly and follow the

speciﬁcations of the following documents:

lthis operating instructions manual

lthis manufacturer declaration (24626)

lthe corresponding installation regulations

Max.increase of the surface temperature during operation:

27 K(individual components in the instrument)

With an ambient temperature of +70°C(+158°F)on the

housing and a process temperature of +70°C(+158°F), the

max.ambient temperature during operation is +97°C(+207°F).

Measures for maintaining explosion protection during oper-

ation:

lOperate the instrument in the range of the speciﬁed

electrical limit values.Permissible supply voltage:see

"Technical data"

lMount and operate the instrument in such a way that no

danger of ignition by electrostatic charges is to be

expected.Antenna,process ﬁtting and housing (as the

case may be depending on instrument version)are made

of electrically non-conductive plastic.

lMake sure that the seal is mounted correctly between

lower part of the housing and cover.Screw the cover on

tightly.

lMake sure there is no explosive atmosphere present if you

want to operate the instrument with opened cover

8VEGAPULS 62 -4... 20 mA/HART

For your safety

28435-EN-060317

lMake sure that the cable gland is tight and strain-relieved.

The outer diameter of the connection cable must be

adapted to the cable gland.Tighten the pressure screw of

the cable gland carefully.

lCover unused openings for cable glands tightly

lMount the instrument in such a position that the sensor

cannot touch the vessel wall or vessel installations.Keep

the inﬂuence of product movements in the vessel in mind.

lThe surface temperature of the housing must not exceed

the ignition temperature of the surrounding explosive

atmosphere

This instrument was assessed by a person fulﬁlling the

requirements acc.to DIN EN 60079-14.

2.10 Environmental instructions

Protection of the environment is one of our most important

duties.That is why we have introduced an environment

management system with the goal of continuously improving

company environmental protection.The environment man-

agement system is certiﬁed acc.to DIN EN ISO 14001.

Please help us fulﬁl this obligation by observing the environ-

mental instructions in this manual:

lChapter "Storage and transport"

lChapter "Disposal"

VEGAPULS 62 -4... 20 mA/HART 9

For your safety

28435-EN-060317

3Product description

3.1Conﬁguration

The VEGAPULS 62 radar sensor is available in two electronics

versions:

lStandard electronics type PS60K

lElectronics with increased sensitivity type PS60S

The respective version can be determined by means of the

type label on the electronics.

The electronics version inﬂuences the CE conformity,the

functional safety (SIL), the factory setting for the product

selection and vessel,form,the accuracy,the voltage supply as

well as the approvals of VEGAPULS 62.The diﬀerences are

speciﬁed in this operating instructions manual in the respective

paragraphs.

The scope of delivery encompasses:

lVEGAPULS 62 radar sensor

ldocumentation

-this operating instructions manual

-Supplementary instructions manual "Safety Manual -

Functional safety acc.to IEC 61508 (SIL)"2)

-Operating instructions manual "Indicating and adjust-

ment module PLICSCOM"(optional)

-Supplementary instructions manual "Heating for indi-

cating and adjustment module PLICSCOM"(optional)

-Supplementary instructions manual "Plug connector for

continuously measuring sensors"(optional)

-Ex-speciﬁc"Safety instructions"(with Ex versions)

-if necessary,further certiﬁcates

VEGAPULS 62 consists of the following components:

lHorn or parabolic antenna

lprocess ﬁtting (depending on the version ﬂange or thread)

loptionally available with purging air connection,reﬂux valve

lHousing with electronics,optionally available with plug

connector,optionally available with connection cable

lHousing cover,optionally available with indicating and

adjustment module PLICSCOM

The components are available in diﬀerent versions.

2)Not with electronics version with increased sensitivity

Versions

Scope of delivery

Components

10 VEGAPULS 62 -4... 20 mA/HART

Product description

28435-EN-060317

Andere Handbücher für VEGAPULS 62

Inhaltsverzeichnis

Andere Vega Zubehör Handbücher

Vega

Vega VEGAPULS 67 Bedienungsanleitung

Vega

Vega VEGAPULS C 21 Bedienungsanleitung

Vega

Vega VEGAPULS 61 Bedienungsanleitung

Vega

Vega VEGAPULS 66 Bedienungsanleitung

Vega

Vega SOLITRAC 31 Bedienungsanleitung

Vega

Vega VEGAPULS 68 Bedienungsanleitung

Vega

Vega vegaflex 83 Bedienungsanleitung

Vega

Vega VEGAPULS 63 Bedienungsanleitung

Vega

Vega vegaflex 83 Bedienungsanleitung

Vega

Vega vegacap 62 Bedienungsanleitung

Vega

Vega SMART-SS0102 Bedienungsanleitung

Vega

Vega FIBERTRAC 32 Bedienungsanleitung

Vega

Vega VEGAPULS 63 Bedienungsanleitung

Vega

Vega VEGAFLEX 82 Bedienungsanleitung

Vega

Vega VEGAPULS Air 23 Bedienungsanleitung

Vega

Vega VEGAPULS 63 Bedienungsanleitung

Vega

Vega vegacap 62 Bedienungsanleitung

Vega

Vega ATEX Montageanleitung

Vega

Vega VEGABAR 28 Bedienungsanleitung

Vega

Vega VEGAPULS 68 Bedienungsanleitung

Vega

Vega VEGAPULS 69 Bedienungsanleitung

Vega

Vega VEGASON 62 Bedienungsanleitung

Vega

Vega VEGAPULS C 21 Bedienungsanleitung

Vega

Vega VEGAPULS 69 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung