Vega VEGADIS 61 Bedienungsanleitung

Level

Switching

Pressure

Indication and Adjustment

Product Information

VEGADIS 61

2VEGADIS 61

7870-EN-021202

VEGADIS 61 3

7870-EN-021202

Contents

1 Product description .............................................................................. 4

1.1 Configuration ...................................................................................................... 4

1.2 Principle of operation .......................................................................................... 4

1.3 Adjustment ......................................................................................................... 4

2 Mounting .............................................................................................. 5

3 Connecting to the sensor ..................................................................... 6

3.1 Prepare connection ............................................................................................. 6

5.3 Wiring plans ....................................................................................................... 6

4 Set-up with the indicating and adjustment module PLICSCOM...........7

4.1 Adjustment system ............................................................................................ 7

4.2 Set-up procedure ................................................................................................ 7

Supplement ................................................................................................8

Technical data ............................................................................................................ 8

Dimensions ................................................................................................................. 9

4VEGADIS 61

7870-EN-021202

Product description

1 Product description

1.1 Configuration

Scope of delivery

The scope of delivery includes:

• VEGADIS 61 indication and adjustment unit

• Documentation

- operating instructions manual

- Ex specific safety instructions (for Ex ver-

sions) and other certificates, if required

Components

VEGADIS 61 consists of the following compo-

nents:

• mounting plate

• housing with electronics

• housing cover with indicating and adjustment

module PLICSCOM

The components are available in different ver-

sions.

1.2 Principle of operation

Area of application

VEGADIS 61 is an external indication and ad-

justment unit for the following VEGA sensors:

– Pressure transmitters VEGABAR 52, 53, 61, 64

and 65

- Level sensors VEGAFLEX 61, 62 and 65.

Fig. 1:

Example of VEGADIS 61 with plastic housing and

mounting plate for wall mounting

housing with

electronics

Housing cover with

indicating and adjust-

ment module

PLICSCOM located

below

Mounting plate

Fig. 2:

Connection of VEGADIS 61 to the sensor

Power supply

VEGADIS 61 is connected to the sensor via a

four-wire, screened standard cable with a

length of max. 25 m. An extra power supply is

not required.

1.3 Adjustment

VEGADIS 61 can be adjusted via two different

media:

• indicating and adjustment module PLICSCOM

• adjustment software PACT

ware

TM and PC.

The parameter adjustment is generally saved in

the sensor, or optionally in the PC when adjust-

ing with PACT

ware

TM and PC.

VEGADIS 61 5

7870-EN-021202

Mounting

2 Mounting

Select installation position

VEGADIS 61 functions in any installation posi-

tion. It is mounted either on a mounting plate or

rail 35 x 7.5 acc. to DIN EN 50 022. The housing

can be rotated 330° without using any tools.

Fig. 3:

Bore pattern for mounting on the mounting plate

Protection against moisture

Protect VEGADIS against moisture.

–>lead the connection cable located in front of

the cable entry downwards.

Fig. 4:

Measures against moisture ingress

Rain and condensed water can thus drain off,

especially in outdoor installations, in rooms

where humidity is expected (e.g. caused by

cleaning processes) or on cooled or heated

vessels.

6VEGADIS 61

7870-EN-021202

Connecting to the sensor

3.1 Prepare connection

Note safety instructions

Always observe the following safety instruc-

tions:

• Connect only in the complete absence of line

voltage

Note safety instructions of Ex applications

In hazardous areas, always observe the appro-

priate guidelines and type approval certificates

of the sensors and VEGADIS 61.

Select connection cable

VEGADIS 61 is connected with standard four-

wire cable to the sensor. An outer diameter of

5 … 9 mm ensures the seal effect of the cable

entry.

We recommend screened cable.

Select connection cable for Ex applications

In Ex applications, please observe the

appropriate installation guidelines.

3 Connecting to the sensor

5.3 Wiring plans

Top view of the electronics and connection

compartment

Display

Typ:

DS61

Com.

567 8

Contact spring for indicating and

adjustment module PLICSCOM

Earth terminal1)

Plug connection for

VEGACONNECT 3

with adapter cable

Spring terminal

for connection of

the sensor

1) Connect cable screen here, connect ground terminal on the

housing exterior to ground as prescribed. The two terminals

are galvanically connected.

2) Earthing at both ends in case of non-Ex. For Ex we recom-

mend earthing at one side acc. to EN 60079-14.

Display

5678

PC with PACT

ware

e.g. VEGABAR

Plug con-

nection

VEGADIS 61 VEGABAR/

VEGAFLEX

Terminal 5 –> Terminal 5

Terminal 6 –> Terminal 6

Terminal 7 –> Terminal 7

Terminal 8 –> Terminal 8

Fig. 7:

Top view of the combined electronics and connection

compartment

Wiring plan

Fig. 8:

Wiring plan

VEGADIS 61 7

7870-EN-021202

Set-up with the indicating and adjustment module PLICSCOM

4 Set-up with the indicating and adjustment module PLICSCOM

4.1 Adjustment system

Indicating and adjustment elements

ESC OK

1.1

LC display for

indication of

- measured value

- menu item

- parameter

[ESC]

[+] [–>]

[OK]

Indication of

the menu items

[ESC]:

- Interrupt entry

- Jump to the next higher menu

[+]:

- Change the value of the parameter

[–>]:

- Menu

- Menu item

- Select parameter

[OK]:

- Jump to the menu range

- Confirm parameter

- Edit parameter

- Save the value

Adjustment system

You adjust the sensor via the four keys and the

display of the A/B module. The functions are

shown in the above illustration. 15. minutes after

you have pushed a key for the last time, an auto-

matic reset to the measured value will be trig-

gered.

4.2 Set-up procedure

The set-up and adjustment of the sensors must

be carried out according to the operating in-

structions of the sensor and the indicating and

adjustment module PLICSCOM.

8VEGADIS 61

7870-EN-021202

Supplement

Technical data

General data

Instrument name VEGADIS 61

Materials

– housing plastic PBT (polybutylenterephtalat),

stainless steel 1.4435 (316L)

– inspection window in the housing cover plastic PC (polycarbonat)

– earth terminal stainless steel 1.4305

Weight 0.35 kg

Ambient conditions

Ambient temperature -20 … +70°C

Storage and transport temperature -40 … +85°C

Adjustment module PLICSCOM

Supply and data transfer with VEGADIS 61 via

sliding contacts (I²C-Bus)

Display LC-Display in Full-Dot-Matrix

Adjustment elements IP 20

Materials

– housing ABS

– inspection window Polyester foil

Electromechanical data

Cable entry 1 x M20 x 1.5 (cable-ø 5 … 9 mm)

spring-loaded terminal for conductor cross-section up to 2.5 mm²

Adjustment circuit

Connection to VEGABAR 52, 53, 61, 64, 65

VEGAFLEX 61, 62, 65

Data transmission digital (I²C-Bus)

Connection line 4-wire, screened

Cable length max. 25 m

Electrical protective measures

Protection IP 66/IP 67

Protection class II

Overvoltage category III

Approvals

ATEX II 1G, 2G EEx ia IIC T6

VEGADIS 61 9

7870-EN-021202

Supplement

Dimensions

VEGADIS 61

R7,5

M20x1

M20x

ca. 69

117

10 VEGADIS 61

7870-EN-021202

Supplement

Andere Handbücher für VEGADIS 61

Inhaltsverzeichnis

Andere Vega Messgerät Handbücher

Vega

Vega VEGACAP 69 Bedienungsanleitung

Vega

Vega VEGASON 61 Bedienungsanleitung

Vega

Vega VEGAPULS 69 Bedienungsanleitung

Vega

Vega VEGABOX 03 Bedienungsanleitung

Vega

Vega VEGACAP 66 Bedienungsanleitung

Vega

Vega VEGABAR 86 Bedienungsanleitung

Vega

Vega VEGAPULS 62 Bedienungsanleitung

Vega

Vega VEGAMIP T61 Bedienungsanleitung

Vega

Vega VEGADIS 371 Ex Bedienungsanleitung

Vega

Vega VEGAFLEX 86 Bedienungsanleitung

Vega

Vega VEGACAL 62 Bedienungsanleitung

Vega

Vega VEGABAR 17 Bedienungsanleitung

Vega

Vega VEGAPULS 56K Bedienungsanleitung

Vega

Vega VEGAPULS 63 Bedienungsanleitung

Vega

Vega MINITRAC 31 Montage- und Bedienungsanleitung

Vega

Vega VEGACAL 63 Bedienungsanleitung

Vega

Vega VEGAMET 625 Bedienungsanleitung

Vega

Vega VEGACAL 66 Bedienungsanleitung

Vega

Vega VEGAPULS WL 61 Bedienungsanleitung

Vega

Vega VEGAPULS 66 Bedienungsanleitung

Vega

Vega VEGAPULS 61 Bedienungsanleitung

Vega

Vega VEGABAR 66 Bedienungsanleitung

Vega

Vega VEGAWELL 52 Bedienungsanleitung

Vega

Vega VEGAMIP R61 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung