Vents VP Series Bedienungsanleitung

CEILING FAN

VP SERIES

USER'S MANUAL

CONTENTS

Purpose

Delivery set

Designation key

Technical data

Safety requirements

Fan design

Mounting and operation guidelines

Connection to power mains

Technical maintenance

Storage regulations

Manufacturer's warranty

Acceptance certificate

Seller information

Connection certificate

Warranty Card

р. 3

р. 4

р. 5

р. 6

р. 9

р. 12

р. 14

р. 15

PURPOSE

Fan

Fastening kit for wall side mounting

Suspended holding brackets

User's manual

Packing

DELIVERY SET

The fan design is constantly being improved, so some models can slightly differ from those ones

described in this manual.

The VP ceiling fan in a metal casing with 100, 125 and 150 mm exhaust outlets (hereinafter

"Fan") is intended for ventilation systems of industrial or residential buildings, swimming

pools, blocks of flats, offices, hospitals, restaurants and other spaces heated during the winter.

The air discharged by the fan must not contain dust, solids, sticky substances and fibrous

materials.

The ambient air temperature must not exceed the limit values given in Table 2.

The fan is designed for installation between the floor slab and the suspended ceiling attached

to the ceiling structure on mounting brackets or to a wall on side mounts (VP 100 and

VP 125 only).

The fan is designed for extended periods of continuous operation without disconnection

from power mains.

The products meet the requirements of IPX4 hazardous parts access and water ingress

protection standard.

DESIGNATION KEY

Modification:

Q- silent-running

Optional equipment:

К - backdraft damper

Outlet diameter [mm]:

100, 125, 150

Fan designation:

VP - ceiling fan

X X X X

VP 100 K Q, VP 100 K

VP 125 K Q, VP 125 K

1 item

2 items

1 item

4 items

1 item

Sample designation:

VP 125 K Q - ceiling fan, outlet

diameter - 125 mm, with check valve

and silent-running motor.

VP 150 K

TECHNICAL DATA

The names of the fans, their parameters and connecting dimensions are given in tables 1, 2.

Table 1

1.1

1.2

Figure 1.1 Figure 1.2

Table 2

VP 125 K Q VP 125 K

VP 100 K Q VP 100 K

Voltage [V]

Frequency [Hz]

Power [W]

Current [A]

Maximum air capacity [m /h]

R.P.M.

Sound pressure level at 3 m distance [dB(A)]

Max. transported air temperature [ C]

IP rating

Fan type

Dimensions, mm Weight,

VP 150 K

VP 125 K Q

VP 125 K

VP 100 K Q

VP 100 K

VP 150 K

Fan type

Pict

SAFETY REQUIREMENTS

Disconnect the fan from power mains prior to any installation, setup, maintenance and repair

operations.

The fan must be connected by an expert qualified for unassisted operations with electrical

installations up to 1,000 V after being made familiar with the present technical certificate.

Prior to installation check for any visible damage to the impeller, casing and grille.

Also check the casing flow channel for any foreign objects which may damage the impeller

wheel blades.

The fan may only be used as intended. No modifications or alterations are allowed.

The fan is not intended for operation by children or any persons with reduced physical, mental

or sensory capacities, lacking practical experience or knowledge unless controlled or briefed

on the device operation by the person responsible for their safety.

The fan may not be used to handle air containing highly flammable substances or vapours

such as alcohol, petrol etc.

The fans take 230 V 50/60 Hz single-phase alternating current.

Children being supervised not to play with the appliance!

FAN DESIGN

The VP ceiling fan (Fig. 2) comprises of casing 1 with lid 2.

The casing has an exhaust outlet 3 with a check valve

which prevents back flow of air while the fan is off.

Terminal box 4 containing the terminals for

connecting the fan to power mains is mounted

to the casing. Grille 5 with air filter 6 is attached

to the casing with screws.

Decorative front panel 7 locks into the slots on grille 5.

The casing houses a single-phase electric motor

with a centrifugal impeller and backward-curved

blades. The electric motor has integrated thermal

protection and restarts automatically.

The replacement of parts of the safety suspension

system device shall be performed by the

manufacturer, its service agent or suitably qualified

persons!

Figure 2

INSTALLATION AND OPERATION INSTRUCTIONS

The fan is installed between the floor slab and the suspended ceiling by means of

two mounting brackets. The distance between the bracket attachment point and the

suspended ceiling must be within 165 - 390 mm.

The fan installation steps are given in Fig. 5, 6.

The power is supplied via an external terminal box mounted to the fan casing.

WARNING: If unusual oscillating movement is observed, immediately stop using the

ceiling fan and contact the manufacturer, its service agent or suitably qualified persons!

The fan is to be installed so that the blades are more than 2.3 m above the floor!

Figure 4

Figure 3

280 mm

VP 100 K Q, VP K

VP 125 K Q, VP 125 K

Figure 5

403,5 mm 250 mm

VP 150 K

Figure 6

Disconnect the damper from the power supply (electric mains) prior to any work on the unit.

Power mains connection shall only be performed by a qualified electrician.

The nominal electrical parameters of the fan are given on the manufacturer's label.

Any tampering with the internal connections is prohibited and will void the warranty.

The fans take 230 V 50/60 Hz single-phase alternating current.

The fan connections (cables and wires) must be durable, insulated and heat-resistant.

The external lead-in (230 V 50/60 Hz) must be equipped with an automatic circuit breaker

built into the stationary wiring to disconnect all the mains phases.

The location of the QF external switch must ensure unobstructed access for shutting down

the fan quickly if required.

The protection trip current must be consistent with the current consumption of the fan.

The recommended nominal current of the automatic cutout switch is 0.6 A,

the recommended minimum conductor cross-section is 0.5 mm .

The conductor cross-section values are given for reference only while the actual selection

must be based on the maximum permissible wire heating which depends on the wire type,

its insulation, length and installation method (i.e. overhead, in pipes or inside the walls).

CONNECTION TO POWER MAINS

TECHNICAL MAINTENANCE

STORAGE REGULATIONS

The technical maintenance of the fan includes periodic cleaning of the fan surfaces from

dust and dirt.

The filter must be replaced on a need-to-do basis, but at least every 6 months.

The impeller cleaning and filter replacement steps are given in Fig. 9.

The impeller blades must be thoroughly cleaned from dust and dirt every 6 months.

The fans must be stored in the original packing in a well-ventilated area at temperatures

from +5 °C to +40 °C and relative air humidity up to 80 % (at Т= +20 °C).

The electrical connections are terminated on the terminal block located inside the fan casing

in accordance with the Wiring Diagram and the terminal designations (Fig. 7).

The terminal designation diagram is given on a label inside the terminal box.

3 4

The steps for connecting the fan to power mains are given on Fig. 8.

~230 V

50/60 Hz

РЕ

Figure 7

Figure 8

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vents Lüfter Handbücher

Vents

Vents TwinFresh Comfo RB-50 Bedienungsanleitung

Vents

Vents Solo RA1-35A-9 P Bedienungsanleitung

Vents

Vents TT PRO Series Bedienungsanleitung

Vents

Vents Style Series Bedienungsanleitung

Vents

Vents VUE 250 V mini A12 Bedienungsanleitung

Vents

Vents TT Silent-M Series Bedienungsanleitung

Vents

Vents Solo RA1-35-9 R Bedienungsanleitung

Vents

Vents VPA100-1.8-1 Bedienungsanleitung

Vents

Vents VKM EC Series Bedienungsanleitung

Vents

Vents VCN 100 Bedienungsanleitung

Vents

Vents KSB 100 Bedienungsanleitung

Vents

Vents MVP DVUT 1000 Bedienungsanleitung

Vents

Vents RO Series Bedienungsanleitung

Vents

Vents Ceileo Compact 200 Bedienungsanleitung

Vents

Vents KPD Bedienungsanleitung

Vents

Vents VKM EC Bedienungsanleitung

Vents

Vents 100 Ace Bedienungsanleitung

Vents

Vents Brig HRV 120 Bedienungsanleitung

Vents

Vents VCU series Bedienungsanleitung

Vents

Vents Solo RA1-35 R Bedienungsanleitung

Vents

Vents Quiet-dMEV 100 DC Bedienungsanleitung

Vents

Vents VS 355 4E Bedienungsanleitung

Vents

Vents TwinFresh R-50 Bedienungsanleitung

Vents

Vents ICF Series Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung