Vents Quiet-dMEV 100 DC Bedienungsanleitung

AXIAL FAN

User’s manual

www.ventilation-system.com

Quiet-dMEV 100 DC

CONTENTS

Delivery set ............................................................................................................................................................................................................................................ 6

Brief description .................................................................................................................................................................................................................................. 6

Operating guidelines ....................................................................................................................................................................................................................... 6

Designation key................................................................................................................................................................................................................................... 7

Installation and set-up..................................................................................................................................................................................................................... 7

Fan options............................................................................................................................................................................................................................................. 8

Fan operation setup.......................................................................................................................................................................................................................... 8

Technical maintenance................................................................................................................................................................................................................... 12

Storage and transportation regulations............................................................................................................................................................................... 12

Manufacturer’s warranty................................................................................................................................................................................................................ 13

This user’s manual is a main operating document intended for technical, maintenance, and operating staﬀ.

The manual contains information about purpose, technical details, operating principle, design, and installation of the

Quiet-dMEV 100 DC unit and all its modiﬁcations.

Technical and maintenance staﬀ must have theoretical and practical training in the ﬁeld of ventilation systems and should

be able to work in accordance with workplace safety rules as well as construction norms and standards applicable in the

territory of the country.

The information in this user’s manual is correct at the time of the document’s preparation.

The Company reserves the right to modify the technical characteristics, design, or conﬁguration of its products at any time

in order to incorporate the latest technological developments.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means in any

information search system or translated into any language in any form without the prior written permission of the Company.

READ THE USER’S MANUAL CAREFULLY BEFORE PROCEEDING WITH INSTALLATION WORKS.

COMPLIANCE WITH THE MANUAL REQUIREMENTS ENSURES RELIABLE OPERATION AND LONG

SERVICE LIFE OF THE UNIT.

KEEP THE USER’S MANUAL AVAILABLE AS LONG AS YOU USE THE UNIT. YOU MAY NEED TO RE-

READ THE INFORMATION ON THE PRODUCT SERVICING.

FOLLOW THE USER’S MANUAL REQUIREMENTS TO ENSURE DURABLE AND

TROUBLE-FREE OPERATION OF THE UNIT.

Disconnect the unit from power supply prior to any connection, servicing, maintenance, and repair

operations.

Only qualied electricians with a work permit for electrical units up to 1000 V are allowed

for installation and maintenance. The present user’s manual should be carefully read

before beginning works.

• Single-phase power mains must comply with the acting local electrical norms and standards.

• Fixed electrical wiring must be equipped with an automatic circuit breaker.

• The unit must be connected to power mains through a QF automatic circuit breaker integrated

into the ﬁxed wiring system. The gap between the circuit breaker contacts on all poles must be

not less than 3 mm. Check the unit for any visible damages of the impeller and the casing before

starting installation. The casing internals must be free of any foreign objects that can damage the

impeller blades.

• While mounting the unit, avoid compression of the casing! Deformation of the casing may result

in the motor jam and noisy operation. Misuse of the unit and any unauthorised modiﬁcations are

not allowed.

• Take steps to prevent ingress of smoke, carbon monoxide, and other combustion products into

the room through open chimney ﬂues or other ﬁre-protection devices. Suﬃcient air supply must

be provided for proper combustion and exhaust of gases through the chimney of fuel burning

equipment to prevent back drafting. Transported air must not contain any dust or other solid

impurities, sticky substances, or ﬁbrous materials.

• Do not use the unit in a hazardous or explosive environment containing spirits, gasoline,

insecticides, etc.

• Do not close or block the intake or extract vents in order to ensure the eﬃcient air ﬂow.

• Do not sit on the unit and do not put objects on it.

• The unit is allowed to be used by children aged from 8 years old and above and persons with

reduced physical, sensory, or mental capabilities or no experience and knowledge provided that

they have been given supervision or instruction regarding safe use of the unit and understand

the risks involved.

• Do not allow children to play with the unit.

THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.

DO NOT DISPOSE THE UNIT AS UNSORTED MUNICIPAL WASTE.

DELIVERY SET

Fan 1 pc.

Screws and dowels 4 pcs.

Plastic screwdriver 1 pc.

User’s manual 1 pc.

Packing box 1 pc.

BRIEF DESCRIPTION

The unit described herein is an axial fan for exhaust ventilation of small to medium-sized premises heated during winter.

The fan is designed for connection to ø100 mm air ducts.

This fan model includes a back valve that prevents air back drafting when the fan is oﬀ.

OPERATING GUIDELINES

The fan is rated for connection to single-phase AC 220...240 V/50 Hz power mains.

Air ﬂow direction in the system must correspond to the direction arrow on the fan casing.

Hazardous parts access and water ingress protection rating is IP45.

The fan is rated for operation at the ambient temperature ranging from +1 °C up to +45 °C.

INSTALLATION AND SET-UP

The fan is designed for wall or ceiling mounting with direct air exhaust to the ventilation shaft or into the round air duct of

matching diameter.

The fan provides rated airﬂow (6, 8, 13 and 15 l/s) when the installation conditions are met according to one of the installation

charts (see Fig. 3-5) and the J1 jumper is selected correctly (see page 10). In the other case, the performance will diﬀer from

the one stated in the User’s manual.

Fan installation sequence:

Step 1. Cut oﬀ power supply and make sure electricity has been turned oﬀ (Fig. 6).

Step 2. Lead the power cable to the ventilation hole (Fig. 7).

Step 3. Remove the front panel from the fan. Then remove the circuit board cover (Fig. 8).

Step 4. Mark and drill holes for mounting the fan and then install the fan (Fig. 9-11).

Step 5. Connect the fan to the electric mains according to the connections diagram (Fig. 16).

Step 6. Install the jumper located on the control board in the position corresponding to the mounting diagram.

Step 7. Cover the casing with a front panel (Fig. 12) and a decorative panel (Fig. 13).

Step 8. Supply power voltage to the fan (Fig. 14).

DESIGNATION KEY

Quiet-dMEV 100 DC X Х Х

Voltage

_: 220-240 V/50 Hz

12: safety extra low voltage of 12 V/50 Hz

Colour:

_: white

Extra options:

V: pull cord switch

T: turn-on and turn-oﬀ delay timer

TH: humidity sensor, turn-on and turn-oﬀ delay timer

DC: direct current electric motor

Outlet duct diameter [mm]

FAN OPTIONS

Quiet-dMEV 100 DC (V) Т fans are equipped with a turn-on and turn-oﬀ delay timer. The unit operates at the set constant

speed. VT models are equipped with a cord-operated switch.

The fan switches to the intensive mode upon control voltage application to input terminal LT by an external switch (e.g.

indoor light switch). Upon control voltage removal the fan continues to operate in the intensive mode for the period of time

set by means of a DIP switch.

Quiet-dMEV 100 DC 12 fan is rated for connection to safe 12 V/50 Hz power mains.

Quiet-dMEV 100 DC (V) TH fans are equipped with a turn-oﬀ and turn-on delay timer when the humidity level is exceeded.

The fan switches to the intensive mode upon control voltage application to input terminal LT by an external switch (e.g.

indoor light switch). Upon control voltage removal the fan continues to operate in the intensive mode for the period of time

set by means of a DIP switch. The V (TH) models are equipped with a cord-operated switch.

FAN OPERATION SETUP

THE TIMER CIRCUIT IS LIVE.

MAKE SURE THE FAN IS DISCONNECTED FROM POWER SUPPLY.

The fan is set up by changing the DIP switch position.

To access the DIP switch take oﬀ the face panel and remove the rubber plug (Fig. 15).

The fan is supplied with a special plastic screwdriver to toggle the DIP switch without damaging its components.

Terminal designations on wiring diagrams

L— phase

N— 0

S — external switch

QF — circuit breaker

DO NOT USE A METAL SCREWDRIVER, KNIFE, ETC. FOR ADJUSTMENT

OPERATIONS NOT TO DAMAGE THE CIRCUIT BOARD.

Jumper 2 (J2)

Jumper 1(J1)

1 2 3 4 5 6 7 8

ON DIP

1 2 3 4 5 6 7 8

Indicator

DIP switches

Speed setting (Trickle)

Speed 1 Speed 2 Speed 3 Speed 4

ON DIP

1 2 3 4 5 6 7 8

ON DIP

1 2 3 4 5 6 7 8

ON DIP

1 2 3 4 5 6 7 8

ON DIP

1 2 3 4 5 6 7 8

0 l/s 6 l/s 8 l/s 13 l/s

Intensive mode (Boost)

ON DIP

1 2 3 4 5 6 7 8

ON DIP

1 2 3 4 5 6 7 8

15 l/s max

Turn-o delay timer

ON DIP

1 2 3 4 5 6 7 8

ON DIP

1 2 3 4 5 6 7 8

ON DIP

1 2 3 4 5 6 7 8

ON DIP

1 2 3 4 5 6 7 8

2 minutes 5 minutes 15 minutes 30 minutes

Humidity mode

ON DIP

1 2 3 4 5 6 7 8

ON DIP

1 2 3 4 5 6 7 8

by threshold intellectual*

* — This mode provides for changing the humidity threshold and fan speed selection in automatic mode, independently choosing the

optimal threshold for the room in which the fan is located. The choice of the fan operation algorithm is determined by analysing the

statistical data of the humidity level in the room.

Inhaltsverzeichnis

Andere Vents Lüfter Handbücher

Vents

Vents Frigate HRV 120 SR Bedienungsanleitung

Vents

Vents TwinFresh Comfo RA-50 Bedienungsanleitung

Vents

Vents KKSA Bedienungsanleitung

Vents

Vents KSA Series Bedienungsanleitung

Vents

Vents Solo RA1-50-9 R V.2 Bedienungsanleitung

Vents

Vents 100 Ace Bedienungsanleitung

Vents

Vents VUE 250 V mini A12 Bedienungsanleitung

Vents

Vents VKM EC Bedienungsanleitung

Vents

Vents VUT 300 WH EC Montageanleitung

Vents

Vents TwinFresh Expert RW-30 V.2 Bedienungsanleitung

Vents

Vents FlexiVent 0811125/63x2 Bedienungsanleitung

Vents

Vents TwinFresh Style Bedienungsanleitung

Vents

Vents iFan Celsius Bedienungsanleitung

Vents

Vents iFan Wi-Fi Bedienungsanleitung

Vents

Vents TwinFresh Comfo RB-50 Bedienungsanleitung

Vents

Vents CF Bedienungsanleitung

Vents

Vents D Series Bedienungsanleitung

Vents

Vents TwinFresh Style Wi-Fi Bedienungsanleitung

Vents

Vents MPA 300 E EC A30 Bedienungsanleitung

Vents

Vents VKMz 100 Bedienungsanleitung

Vents

Vents TwinFresh Comfo RA1-25 Bedienungsanleitung

Vents

Vents TT PRO Bedienungsanleitung

Vents

Vents CBF LP 200 Bedienungsanleitung

Vents

Vents TwinFresh Comfo RA-50 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung