VeriFone MX 760 Bedienungsanleitung

Secure PumpPAY

MX 760 Configuration Guide

Revision: B

Software Version 2.00.07

Secure PumpPAY MX 760 Configuration Guide

November 10, 2011

VeriFone®, Inc.

2099 Gateway Place

Suite 600

San Jose, CA 95110

Telephone: 408-232-7800

http://www.verifone.com

Printed in the United States of America.

No part of this publication covered by the copyrights herein may be reproduced or

copied in any form or by any means — graphic, electronic, or mechanical, including

photocopying, taping, or information storage and retrieval systems — without written

permission of the publisher.

The contents of this document and all features and specifications are subject to

change without notice. The information contained herein does not represent a

commitment on the part of VeriFone, Inc.

Publications are not stocked at the address given above. Requests for VeriFone

publications should be made to your VeriFone representative.

VeriFone, the VeriFone logo, and Ruby SuperSystem are registered trademarks of

VeriFone, Inc. Sapphire, Topaz, HPV-20, Ruby Manager, Everest, EASY ID, Electronic

Journal On-site, and Ruby Card are trademarks of VeriFone, Inc. in the U.S. and/or

other countries. All other trademarks or brand names are the properties of their

respective holders.

Secure PumpPAY MX 760 Configuration Guide Revision History

Software

Version. Rev. Date Description

1.00.00 A June 01, 2010 Initial documentation

release.

2.00.03 B November 10, 2011 Updated for new software

version, which provides

PAYMEDIA audio and video

support.

November 10, 2011 i

Contents

Configuring the Secure PumpPAY Software . . . . . . . . . . 1

Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Setting Up the MX 760 for Use on a LAN . . . . . . . . . . . . . . . . . 2

Entering System Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Setting the Terminal IP Address . . . . . . . . . . . . . . . . . . . . . . 4

Other System Mode Functions . . . . . . . . . . . . . . . . . . . . . . . 6

Entering Manager Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Debit Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

No Debit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Poll DCR Options Configuration . . . . . . . . . . . . . . . . . . . . . 13

Printer Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Idle Time Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Enabling/Disabling the Network Connection . . . . . . . . . . . . 21

Enabling/Disabling Broadcast. . . . . . . . . . . . . . . . . . . . . . . . 23

RFID Configuration (Not Available) . . . . . . . . . . . . . . . . . . 24

Audio Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Video Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Media Proxy Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . 30

Changing the Baud Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

VVES Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Setting Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Displaying a Log File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Clearing Log and Poll Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Entering Manager Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Running Diagnostic Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Diagnostics MENU1 Tests . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Diagnostics MENU2 Tests . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Running the Demo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Entering Manager Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Running the Demo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Secure PumpPAY Retrofit Kit Configuration Guide

ii November 10, 2011

Configuring the Ruby or Sapphire System . . . . . . . . . . . . 63

Running Gemstall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Running Gemstall for Shell Sites . . . . . . . . . . . . . . . . . . . . . . . . 64

Enabling Debit on the Ruby . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Enabling Fueling Image Animation on the Ruby . . . . . . . . . . . . 65

November 10, 2011 1

1Configuring the Secure PumpPAY Software

This chapter describes how to configure Secure PumpPAY MX 760 terminal after the Retrofit Kit has

been installed.

Important:Before you begin, be sure the switch on the RS232/RS485 Converter (P/N 13976-01) is

set to 2W (2-wire). If the switch is not set correctly, DCR communications between

Secure PumpPAY and the Ruby will fail. Also, make sure the converter is connected to

the power port of the Ruby.

Using the Keypad

The keys you use to configure the MX 760 terminal are described in the following illustration.

Note: Press [*]on the keypad to move the cursor to the left. Press [#] on the keypad to move the

cursor to the right.

Scroll ahead

through

options.

ENTER. Select options

and accept numeric entries.

CLEAR.

Go back to

menu.

Scroll back

through

options.

Enter

numeric

data.

CANCEL.

Reject or delete

entries.

Secure PumpPAY Retrofit Kit Configuration Guide

2November 10, 2011

Setting Up the MX 760 for Use on a LAN

Use the following procedure for setting up the MX 760 terminal for use on the network.

To set up the MX 760 terminal for use on the network, you must enter System Mode.

Note: Before entering System Mode and selecting the functions to perform, verify that the

MX 760 terminal has been installed as described in one of the Secure PumpPAY MX 760

Installation Guides. Make sure that the terminal is connected to a power source,

connected to the network, and is turned on.

Entering System Mode

Note: If no application has been installed on the MX 760 terminal, the terminal will

automatically start in System Mode on power up.

If an application is running on the MX 760, do the following to enter System Mode:

1. At the main welcome screen, press the [1], [5], and [9] keys simultaneously on the keypad and

release the keys immediately.

2. After a 10 – 20 second wait, the system will prompt for the System Mode password. Enter the

password on the keypad and press [ENTER]. The default System Mode password is 166831.

3. If the password is entered correctly, the System Mode main menu screen displays. (If the

password is entered incorrectly, the system restarts the application.)

Secure PumpPAY Retrofit Kit Configuration Guide

November 10, 2011 3

4. To navigate through the menu screens and select functions, use one of the following methods:

a. Use the menu keys as follows:

– Press the top, left menu key once to display a hand-shaped cursor. Press the key additional

times to move cursor over icons in a counter-clockwise (forward) direction. When the

cursor is over the function you want to select, press [ENTER].

– Press the top, right menu key once to display a hand-shaped cursor. Press the key

additional times to move cursor over icons in a clockwise (backward) direction. When the

cursor is over the function you want to select, press [ENTER].

b. Use the numeric keypad as follows:

– Press 1 to select Information.

– Press 2 to select Configure.

– Press 3 to select Diagnostics.

– Press 4 to select File Transfer.

– Press 5 to select File Manager.

– Press 6 to select Security.

– Press 7 to select the Left Arrow (if visible)

– Press 8 to navigate up (when applicable).

– Press 9 to select the Right Arrow (if visible).

– Press 0 to navigate down (when applicable).

–Press

*to move cursor counter-clockwise.

–Press

#to move cursor clockwise.

Press to Move

Forward Through

Press to Move

Backwards Through

Secure PumpPAY Retrofit Kit Configuration Guide

4November 10, 2011

Setting the Terminal IP Address

To set the IP address for the MX 760, do the following.

1. From the System Mode main menu, select the CONFIGURE icon to display the Configure

menu.

2. From the Configure menu, select the NETWORK icon to display the Network Interface

menu.

3. From the Network Interface menu, select the Ethernet round button, and then select the

Ethernet oval button to display the Ethernet Configuration menu.

Select

Inhaltsverzeichnis

Andere VeriFone Zahlungsterminal Handbücher

VeriFone

VeriFone Carbon 8 Bedienungsanleitung

VeriFone

VeriFone e285 Bedienungsanleitung

VeriFone

VeriFone MX 900 Series Bedienungsanleitung

VeriFone

VeriFone MX850 Bedienungsanleitung

VeriFone

VeriFone Vx-520 Series APACS 40 Einrichtungshandbuch

VeriFone

VeriFone Omni 3200M Bedienungsanleitung

VeriFone

VeriFone VX 805 Bedienungsanleitung

VeriFone

VeriFone e285 Bedienungsanleitung

VeriFone

VeriFone Omni 3200 Bedienungsanleitung

VeriFone

VeriFone VX 675 Series Bedienungsanleitung

VeriFone

VeriFone MX 880 Bedienungsanleitung

VeriFone

VeriFone C680 3G-BT-WiFi Bedienungsanleitung

VeriFone

VeriFone TRANZ 380 Bedienungsanleitung

VeriFone

VeriFone e285 Bedienungsanleitung

VeriFone

VeriFone VX675 CTLS Bedienungsanleitung

VeriFone

VeriFone VX 520 3G Bedienungsanleitung

VeriFone

VeriFone Omni 3350 Bedienungsanleitung

VeriFone

VeriFone VX 520 Series Bedienungsanleitung

VeriFone

VeriFone V240m Bedienungsanleitung

VeriFone

VeriFone NURIT 8000 Bedienungsanleitung

VeriFone

VeriFone Presto Smart e355 Bedienungsanleitung

VeriFone

VeriFone UX400 Bedienungsanleitung

VeriFone

VeriFone V240m Bedienungsanleitung

VeriFone

VeriFone VX 675 Series Bedienungsanleitung

Beliebte Zahlungsterminal Handbücher anderer Marken

PAX

PAX D180SRF Bedienungsanleitung

LinkPoint

LinkPoint AIO Bedienungsanleitung

Moneris

Moneris hispeed 6200 Bedienungsanleitung

Moneris

Moneris iWL220 Bedienungsanleitung

Ingenico

Ingenico iUC280 Bedienungsanleitung

Ingenico

Ingenico Tetra Move/5000 Bedienungsanleitung

Ingenico

Ingenico iWL250B Bedienungsanleitung

Optimum

Optimum M4230 Bedienungsanleitung

Triton

Triton RL5000 Bedienungsanleitung

Ingenico group

Ingenico group Lane/8000 Bedienungsanleitung

Gilbarco

Gilbarco FlexPay IV CRIND Installations- und Betriebshandbuch

Infinite Peripherals

Infinite Peripherals Infinea Tab Lite Bedienungsanleitung

PAX

PAX S920 Bedienungsanleitung

Ingenico

Ingenico iCT220, iCT250 Bedienungsanleitung

dejavoo

dejavoo Z Series Bedienungsanleitung

Optomany

Optomany axept S900 Bedienungsanleitung

Skyzer

Skyzer iWL252 BLUETOOTH Bedienungsanleitung

Moneris

Moneris iWL220 Bedienungsanleitung