VeriFone X990 Bedienungsanleitung

1120080064

Product Manual

Verifone Systems(China)Inc.

[email protected]

MIC

POS Terminal User guide

User Instruction

Thank you very much for choosing VERIFONE products, pls read this

instruction before use so that you could know the performance deeply.

Please keep this instruction for your reference if you have problem during

use.

Our company will try best to adopt new technologies, new components,

new software to improve products. Hence, we have right to change

without notice .The feature, function and operation described in this

instruction may be different from the performance of the selling products ,

in some cases ,image is prototype devices. Pls inquiry our company or

agent for appropriate document before using this instruction.

The device should be installed by after sale service person .Our

company shall not be liable for any consequences arising from

unauthorized changes to the equipment, replacement of the

connected equipment and cables not as specified.

1.Basic configuration

Front camera

Charging indicator light

Touch screen

IC card slot

Magnetic card slot

RF card reading area

The radio frequency indicator light Printing paper storehouse

The headset port

Type C port

The flash light

POS Terminal User guide

ON/OFF button

Rear camera

Battery cover

Speaker

Nameplate

POS Terminal User guide

3.Terminal specification

2.1 ON/OFF instruction

POWER ON: press " " ON/OFF button for 3 seconds

POWER OFF: press " " ON/OFF button for 3 seconds and then press

"power off" on the screen

2.2 Magnetic card

Put the magnetic card into the magnetic card slot to read, magnetic side towards

the LCD (refer to the sign for card identification. keep smooth,uniform when

swiping the card.

2.3 Contact IC card

Insert IC card into the IC card slot, the metal side towards keypad, please refer

to card identification.

2.4 Contactless card

Put the contactless card near the contactless card reader zone on the device ,

and make contactless card transaction.

Put one contactless card every time to avoid conflict if putting more cards.

2.5 Charging

Connect the Type C cable to POS terminal, connect the other connector to 5V/2A

power adaptor to charge.

2.User instruction

Specification

ARM Cortex-A7 quad core CPU

1G RAM+8G ROM Flash(2G RAM+16G Flash extendable)Memory

CPU

X990

Model Name

Item

Android 7.x secure payment systemOperating System

5.5 inch IPS screen，resolution 1280×720Display

Micro SD card interface, maximum support 32GBExtended storage

Capacitive touch screen, support e-signatureTouch Screen

Support ISO/IEC 14443 Type A&B、MiFare card, conform to

qPBOC、PAYPASS and PAYWAVE standard

Contactless card

reader

Support ISO7811 1/2/3track ，bi-directional readingMagnetic card reader

1pc，conform to ISO7816、PBOC3.0 and EMV 4.2 LEVEL

1&2 standard

IC card reader

Built-in password keypad

Conform to ANSI X9.8/ISO9564，ANSI X9.9/ISO8731 standard

Support Master Key/Session Key、Fixed、DUKPT etc PIN

protection technology

Support DES，3DES，RSA，SHA-256 and AES etc algorithm

Password keypad

High pixel customized camera with flash,auto focus(optional)

USB TYPE C

3.5mm headset jack

SAM/SIM：2 x SAM，1 x SIM；or 1 x SAM，2 x SIM

Professional camera with 1d/2d barcode fast recognition

algorithm(optional)

Built-in high-speed thermal printer with print speed greater

than 25 lines per second, support paper roll with width of

58mm and diameter of 40mm,support black mark positioning

4G,compatible with 3G and 2G,Wi-Fi,Bluetooth

4.1 Please use device under the specified voltage range, don't use too low or too

high voltage.

4.2 Please make sure the connection is correct when connecting the device to the host.

4.3 Don't damage the cable, if the cable is damaged, please don't use it anymore.

4.4 Don't put the device in direct sunlight, high temperature, humidity ,dusty or strong

corrosive gas.

4.5 Put away from liquid, don't use the product where the water may wet or enter into it,

don't operate the product with wet hand.

4.6 It is strictly prohibited to open the device without permission. otherwise the device

will not be used,the consequence will be at your own risk.

4.7 If the device fails, please contact maintenance person, user is not allowed to

maintain the device.

4.8 Be sure to use the original battery or specified type of battery, otherwise it may

cause the risk of explosion, prohibit the dismantling impact, extrusion, heating,

short circuit or put into the fire, the battery is prohibited to use after soaking.

4.9 Pls remember to close the battery cover after replacing the battery.

4.10 It is strictly prohibited to charge and replace batteries in dangerous places.

4.11 Adapter shall be installed near the equipment and shall be easily accessible

4.12 Caution：Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Physical interface

4 contactless indicator light (according to CUP definition),

1 two-color charging indicator light

Indicator light

Front camera

POS Terminal User guide

Printer

Built-in buzzer, speaker, microphoneBuzzer

Built-in GPS, support A-GPS, Glonass, BeidouGPS

Battery Standard configuration 2600mAh/7.2V

Communication

Input：AC 110V～240V/50～60Hz/0.3A

Output：DC 5V/2A

Power adaptor

1.The rear camera

2.The base (charge + Ethernet)

Optional accessories

Operating temperature：0℃～45℃

storage temperature：-20℃～70℃

Relative humidity：5%～90% (Non-condensing)

Environmental

condition

4.Instruction for installation and usage

Rear camera

Type C cable

4.13 Hereby, [Verifone Systems (China) Inc.] declares that the radio equipment type

[X990] is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following

internet address: http://www.verifone.cn

4.14 Please use Verifone verified power adaptor for battery charging; the temperature

range under battery charging mode is 0℃to 40℃, the operating temperature

range is 0℃to 45℃. Do not operate and use the device outside the above

temperature range, otherwise it may cause the risk of explosion.

POS Terminal User guide

5.Password anti-peep instruction

1. Using body or hand to block when entering the password to prevent it from peeping.

2. The monitor range should be as far as possible to avoid the placement of the device

when installing the surveillance camera, so as to avoid the cardholder's password

leakage.

3. Clients and merchants need to conduct routine inspection to ensure that the

equipment has not been changed and there are no suspicious objects in the IC card

slot.

6.Packing list

Name Qty

Serial No.

X990

Product Manual

Printing paper

Power adaptor

Battery

7X990 Declaration of Conformity 1

Verifone Systems(China)Inc.reserves the right to change product technical specification

without prior notice.

Verifone Systems (China) Inc.

24 hours service telephone:13910835232

Fax:010-85869838

Service support E-mail:support_bjs@Verifone.com

Web site:www.verifone.com

Address:Room 301, ZhuoMing Plaza, No. 1069, South

Huihe Street, Chaoyang District，Beijing，China

Contact in USA:

Verifone, Inc.

Address: 2560 N. 1st Street, Suite 220, San Jose, CA 95131, USA

Tel: +1 (408) 232-7800

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz

frequency range.

AT BE BG HR CY CZ DK

EE FI FR DE EL HU IE

IT LV LT LU MT NL PL

PT RO SK SI ES SE UK

PSAM/SIM 2

PSAM

This product supports Receiver Category 2.

SIM1

PSAM2

PSAM1

FCC Regulations:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiated radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance

could void the user‘s authority to operate the equipment.

FCC RF Exposure Information (SAR)

This device is designed and manufactured not to exceed the emission limits for exposure to radio

frequency (RF) energy set by the Federal Communications Commission of the United States.

During SAR testing, this device is set to transmit at its highest certified power level in all tested

frequency bands, and placed in positions that simulate RF exposure in usage near the body.

Although the SAR is determined at the highest certified power level, the actual SAR level of the

while operating can be well below the maximum value. This is because the device is designed

to operate at multiple power levels so as to use only the power required to reach the network.

In general, the closer you are to a wireless base station antenna, the lower the power output.

The exposure standard for wireless employs a unit of measurement known as the Specific

Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.

The FCC has granted an Equipment Authorization for this model device with all reported SAR

levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on

this model device is on file with the FCC and can be found under the Display Grant section of

www.fcc.gov/oet/ea/fccid after searching on

FCC ID: B32X990

For this device, the highest reported SAR value for usage near the body is 1.15 W/kg.

While there may be differences between the SAR levels of various devices and at various

positions, they all meet the government requirement.

ISED Notice

This device complies with Innovation, Science and Economic Development Canada license-exempt

RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR Innovation, Sciences et Développement économique

Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux

conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d'en

This device complies with the Canadian ICES-003 Class B specifications. CAN ICES-3(B)/ NMB-3(B)

IC: 787C-X990

ISED Radiation Exposure Statement

This EUT is in compliance with SAR for general population/uncontrolled exposure limits in

ISED RSS-102 and had been tested in accordance with the measurement methods and procedures

specified in IEEE 1528 and IEC 62209. This device and its antenna(s) must not be co-located or

operating in conjunction with any other antenna or transmitter.

Cet appareil est conforme aux limites d'exposition DAS incontrôlée pour la population générale de

la norme CNR-102 science de l’innovation et le développement économique Canada et a été testé

en conformité avec les méthodes de mesure et procédures spécifiées dans IEEE 1528 et

IEC 62209. Cet appareil et sa ou ses antennes ne doivent pas être co-localisés ou fonctionner en

conjonction avec tout autre antenne ou transmetteur.

Inhaltsverzeichnis

Andere VeriFone Touch-Terminal Handbücher

VeriFone

VeriFone Vx Series Bedienungsanleitung

VeriFone

VeriFone V400m Referenzhandbuch

VeriFone

VeriFone Vx-520 Series APACS 40 Bedienungsanleitung

VeriFone

VeriFone V240m Bedienungsanleitung

VeriFone

VeriFone VX 675 Bedienungsanleitung

VeriFone

VeriFone VX680-GPRS Bedienungsanleitung

VeriFone

VeriFone CM5P Bedienungsanleitung

VeriFone

VeriFone Topaz XL Einrichtungshandbuch

VeriFone

VeriFone MX860 Gebrauchs- und Pflegehandbuch

VeriFone

VeriFone Tranz 330 Bedienungsanleitung

VeriFone

VeriFone Tranz Series Bedienungsanleitung

VeriFone

VeriFone VX 675 Bedienungsanleitung

VeriFone

VeriFone MX800 Series Bedienungsanleitung

VeriFone

VeriFone Tranz 330 Bedienungsanleitung

VeriFone

VeriFone MX 900 Series Bedienungsanleitung

VeriFone

VeriFone C680 3G Bedienungsanleitung

VeriFone

VeriFone Vx 810 Duet Bedienungsanleitung

VeriFone

VeriFone KX600 Bedienungsanleitung

VeriFone

VeriFone VX690 Bedienungsanleitung

VeriFone

VeriFone VX 675 Bedienungsanleitung

VeriFone

VeriFone UX700 ML Bedienungsanleitung

VeriFone

VeriFone OMNI 3300 Bedienungsanleitung

VeriFone

VeriFone T650p Bedienungsanleitung

VeriFone

VeriFone V400 Series Handbuch

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung