VeriFone T650p Bedienungsanleitung

User Manual

Verifone, Inc.

T650p Petro

Smart POS Terminal

Verifone Part Number: DOC560-012-EN-A, Revision A02

POS Terminal User Manual

User Instruction

Thank you very much for choosing VERIFONE products, please read

this instruction before use so that you could know the performance deeply.

Please keep this instruction for your reference if you have problem during

use.

Our company will try best to adopt new technologies, new components,

new software to improve products. Hence, we have right to change

without notice. The feature, function and operation described in this

instruction may be different from the performance of the selling products,

in some cases, image is prototype devices. Please inquire our company

or agent for appropriate document before using this instruction.

The device should be installed by after sales service person. Our company

shall not be liable for any consequences arising from unauthorized changes

to the equipment, replacement of the connected equipment and cables not

as specified.

The User Manual applies to Model T650p Petro.

Verifone, Inc. reserves the right to change product technical specification

without prior notice.

Function and purpose of the equipment

POS (point of sale) is a kind of multi-functional terminal, which can be

installed in the special merchants and acceptance outlets of credit cards and

connected with computers to form a network. It can support the automatic

transfer of electronic funds. It has the functions of supporting consumption,

pre-authorization, balance query and transfer, and is safe, fast and reliable to

use.

Verifone Inc.

2560 N, 1st Street, Suite 220 San Jose, California 95131, USA

Verifone Holding GmbH

Seilerweg, 2F, Bad Hersfeld 36251, Germany

Verifone UK Ltd.

3 Roundwood Avenue Stockley Park Uxbridge, UB11 1AF, UK

1.Basic configuration

Front camera

Charging indicator LED

Touch screen

IC card slot

Magnetic card slot

RF card reading area

The radio frequency indicator LED

Printing paper storehouse

MIC

The headset port

The Type C port

POS Terminal User Manual

ON/OFF button

The volume buttons

2744 N University Drive | Coral Springs, FL 33065 | www.verifone.com

GC / Ex 8656.01 / 21.

EU-type Examination Certificate

TÜV 21 ATEX 8656 X, Issue:01

Quality Management System:

Ex QAN (Quality Assessment notification for production facility):N/A

Reference to the harmonized standards

EN IEC 60079-0:2018(State of the Art)

EN 60079-11:2012(State of the Art)

Where appropriate, the standards and technical specifications used

N/A

9.Where appropriate, references to other EU Directives which have been applied

N/A

We,

Verifone., Inc

, declare that the design, manufacturing and inspection of the T650p Petro described

ove is in conformity with the provisions of the ATEX Directive 2014/34/EU.

mark: The signatory needs to be a responsible officer of the manufacturer or of the authorised representative.

Thomas Weikart

EVP, Global Operations,

2744 North University Drive,

Coral Springs, FL 33065

09.12.2022

Battery cover

Speaker

The flash

Rear camera

POS Terminal User Manual

Point of Sale Terminal

Product: T650

Model: T650p Petro

Rating: 5V DC, 2A

I.S: Ui=8.4V Ta: 0 ~45

ATEX Cert.: TüV 21 ATEX 8656 X

HW: H565-xx-xx-xxx-xxx-xx

Verifone, Inc.

1400 West Stanford Ranch Road, Suite 200 Rocklin, CA

95765, USA

（195001）

II 3 G Ex ic IIA T3 Gc

Point of Sale Terminal

T650p Petro

TüV 21 ATEX 8656 X

Verifone, Inc.

1400 West Stanford Ranch Road Suite 150 Rocklin CA 95765 USA

II 3 G Ex ic IIA T3 Gc

2744 N University Drive | Coral Springs, FL 33065 | www.verifone.com

DECLARATION OF CONFORMITY

According to ATEX Directive 2014/34/EU

1.Manufacturer

Manufacturer:

Verifone., Inc

Address:

1400 West Stanford Ranch Road Suite 150 Rocklin CA 95765 USA

2.Factory

Manufacturer:

Verifone., Inc

Address:

1400 West Stanford Ranch Road Suite 150 Rocklin CA 95765 USA

Note: Same as above.

3. Equipment Information:

Product name: Point of Sale Terminal

Type / model: T650p Petro

Serial number: N/A

Note: N/A

4. General Description for The Equipment:

T650p Petro is a wireless Point of sale machine with printer.

It is powered by recharging battery SCUD SX18650-2S1P.

T650p Petro is comprised of electrical circuits,caremas(front camera and rear camera), printer,display

unit,touch screen,IC card reader,memory card,MIC,Speaker,RF card reader and magnetic card slot.

The enclosure of T650p Petro was made of PC GE C2950&LG GN5001RFG.

The equipment to be intended use in Zone 2 with gas group IIA.

5.General Description for Safe Use:

a) The marking of the equipment shall include the following:

3 G Ex ic IIA T3 Gc

b) Apparatus supply and input/output parameters:

Ui=8.4V

c) Notified Body :TÜV Rheinland Industrie Service GmbH

d) The examination and test results are recorded in the confidential report:

2.1 ON/OFF instruction

POWER ON: press " " ON/OFF button for 3 seconds

POWER OFF: press " " ON/OFF button for 3 seconds and then press

"power off" on the screen.

2.2 Magnetic card

Put the magnetic card into the magnetic card slot to read, magnetic side towards

the LCD (refer to the sign for card identification. keep smooth, uniform when

swiping the card).

2.3 Contact IC card

Insert IC card into the IC card slot, the metal side towards keypad, please refer

to card identification.

2.4 Contactless card

Put the contactless card near the contactless card reader zone on the device,

and make contactless card transactions.

Put one contactless card every time to avoid conflict if putting more cards.

2.5 Charging

Connect the Type C cable to POS terminal, connect the other connector to 5V/2A

power adaptor to charge.

2.User instruction

3.Terminal specification

Specification

ARM Cortex-A7 Quad-core CPU

2G RAM+16G ROM FlashMemory

CPU

T650p PetroModel Name

Item

Android 8.x secure payment systemOperating System

5.5 inch IPS screen, resolution 1280×720

Display

Micro SD card interface, maximum support 32GBExtended storage

Capacitive touch screen, support e-signatureTouch Screen

Support ISO7811 1/2/3 track, bi-directional reading

Magnetic card reader

Conform to ISO7816, PBOC and EMV level 1&2 standardIC card reader

Built-in password keypad

Conform to ANSI X9.8/ISO9564, ANSI X9.9/ISO8731 standard

Support Master Key/Session Key, Fixed, DUKPT etc PIN

protection technology

Support DES, 3DES, RSA, SHA-256 and AES etc algorithm

Password keypad

POS Terminal User Manual

1MASP

1MIS

/2MIS

2MASP

4.1 Please charge the terminal within the specified voltage range, don't use too

low or too high voltage.

4.2 Please make sure the connection is correct when connecting the device to the

host and/or the power adaptor.

4.3 Don't damage the cable, if the cable is damaged, do not use it anymore.

4.4 Don't expose the terminal with direct sunlight, high temperature, humidity, dusty

or strong corrosive gas.

4.5 Stay away from liquid, don't use the product where the water may pour over or

enter into, don't operate the product with wet hand.

4.Instructions for installation and usage

1 x USB port

3.5mm Audio jack port

2 x SAM

;

or 1 x SAM, 2 x SIM

;

or 2 x SAM, 1 x SIM

Physical interface

4 contactless indicator LED

1 two-color charging indicator LED

Indicator LED

Professional camera with 1D/2D barcode fast recognition

algorithm(optional)

Front camera

Built-in high-speed thermal printer with print speed greater

than 25 lines per second, support paper roll with width of

58mm and diameter of 50mm, support black mark positioning

Printer

Built-in buzzer, speaker, microphone

Buzzer

Built-in GPS, support A-GPS, Glonass, Beidou

GPS

Battery Standard configuration 3350mAh/7.2V

4G/3G/2G compatible(optional); Wi-Fi; Bluetooth

Connectivity

Input: AC 110V～240V/50～60Hz/0.4A

Output: DC 5V/2A

Power adaptor

1.The rear camera

2.The base (charge + Ethernet)

Optional accessories

Operating temperature: 0 ～45

storage temperature: -20 ～60

Relative humidity: 5%～90% (RH without condensation)

Environmental

condition

High pixel customized camera with flash, autofocus(optional)

Rear camera

Support ISO/IEC 14443 Type A&B, MiFare card, conform to

qPBOC, PAYPASS and PAYWAVE standard

Contactless card

reader

POS Terminal User Manual

4.6 It is strictly prohibited to open the terminal without permission, otherwise the

terminal will fail, the consequence will be at your own risk.

4.7 Be sure to use the original battery or specified type of battery, otherwise it may

cause the risk of explosion, prohibit the impact, extrusion, heating, short circuit

or put the battery into the fire, the battery is prohibited to use after soaking.

4.8 Please follow step E to step K of Quick Installation Guide replacing the battery

and remember to close the battery cover after replacing the battery.

4.9 Please refer step I of Quick Installation Guide replacing the IC Card,SIM Card

T-Flash Card and PSAM Card.

4.10 Please refer step A to step D of Quick Installation Guide replacing printer paper roll.

4.11 Adapter shall be installed near the equipment and shall be easily accessible.

4.12 Hereby, [Verifone, Inc.] declares that the radio equipment type

[Model: T650p Petro] is in compliance with Directive 2014/53/EU.

The content text of the EU declaration of conformity is available on

https://www.verifone.com/en/us/verifone-regulatory-and-compliance-sheets.

4.13 Please use Verifone verified power adaptor for battery charging; the temperature

range under battery charging mode is 0 to 45 (Over Temperature protection

45 3 , under Temperature protection 0 3 ). Do not operate and use

the device outside the above temperature range, otherwise it may cause the risk

of explosion.

POS Terminal User Manual

5.1.1 WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT

5.1.2 WARNING – DO NOT CHARGE THE BATTERY IN HAZARDOUS LOCATION

5.1.3 WARNING – USE ONLY SCUD SX18650-2S1PS 7.2V Li-ion Battery

5.1.4 The replacement procedure of battery pack shall be observed in line with Ex instruction.

5.1.5 Use only Ten Pao Electronics(Huizhou) model S010CNV0500200 (for EU version),

S010CNS0500200(for AU version) and model S010CNU0500200(for NA version)

AC Charger for charging purpose, if other charger used, then this charger must be

approved by general industrial standards and has same output parameters as the

approved chargers.

5.1.6 The POS terminal needs to protected from impacts with high impact energy.

5.1.7 The POS terminal are not permitted exposure to light for a long term directly, under the

extreme situations, for example, the strong sunlight, the POS terminal should be used

with additional protection.

5.1.8 It is not allowed connect the headset in hazardous area.

5.1.9 It is not allowed insert SIM card, T-Flash card and PSAM card in hazardous area.

5.1.10 It is not allowed replace the printing papers in hazardous area.

5.Security provisions

5.1 Special conditions for safe use

EN IEC 60079-0:2018;

EN 60079-11:2012;

5.2 Standard Compliance

5.3.1 National regulations: ATEX directive 2014/34/EU

5.3.2 ATEX Type Examination Certificate No.: TÜV 21 ATEX 8656 X

5.3.3 Ex Marking: II 3 G Ex ic IIA T3 Gc

5.3.4 Tamb: 0°C ~+45°C

5.3 Ex information for POS terminal T650p Petro

Additional temperature assessment and spark ignition assessment should be performed

base on Type Examination Certificate if the unnormalized cards used.

CCCC

POS Terminal User Manual

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz

frequency range.

For UK WLAN:5150-5350 MHz

This device is restricted for indoor usage in UK when operating in the 5150 to 5350

MHz frequency range.

This product supports Receiver Category 2.

UK(NI)

CE Notice For 5G Band (WLAN:5150-5350 MHz)

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce

the potential for harmful interference to co-channel mobile satellite systems.

l’appareil de fonctionnement dans la bande 5150-5250 MHz est uniquement destiné

à une utilisation intérieure afin de réduire le risque d’interférences nocives pour

co-canaliser les systèmes satellitaires mobiles.

9.Notice

8.Packing list

POS Terminal User Manual

5.3.5 IP Rating:IP20

5.3.6 Relative humidity: 5% to 90%(Non-condensing)

5.3.7 I.S Parameters:

Um=5.25V(AC Adapter output/Overvoltage category II)

Ui:8.4V(Maximum open-circuit voltage)

5.4.1 The equipment to be used in Zone 2 hazardous area only with gas group IIA.

5.4.2 POS (Point of Sale) can be used in but not limited to factories, stores, gas

stations etc.

5.4 Intended use

6.Fault identification and elimination

6.1 Cannot power on

Check whether the battery is out of power, plug in the power adapter to charge it.

6.2 POS does not work properly

Long press the power on key to restart the terminal or plug in the battery.

6.3 Cannot print

Check whether the printing paper is missing and whether the paper cover is well

closed.

*POS terminal is not allowed to be maintained by maintenance personnel not

work with the company.

7.Password anti-peep instruction

7.1 Using body or hand to block when entering the password to prevent it from

peeping.

7.2 The monitor range should be as far as possible from the placement of the terminal

when installing the surveillance camera, so as to avoid the cardholder's password

leakage.

7.3 Clients and merchants need to conduct routine inspection to ensure that the

terminal has not been changed and there are no suspicious objects within the

smart card and magnetic card slot.

USB-C charging cable

Name Functional Qty

Serial No.

T650p Petro POS Terminal

User Manual

Paper roll

Power adaptor

Battery

7 T650p Petro Declaration of Conformity 1

Charging

Main function

Guidance

Print material

Power supply

CE Declaration

Andere Handbücher für T650p

Inhaltsverzeichnis

Andere VeriFone Touch-Terminal Handbücher

VeriFone

VeriFone UX410 Bedienungsanleitung

VeriFone

VeriFone DUET Vx810 Bedienungsanleitung

VeriFone

VeriFone V240m Bedienungsanleitung

VeriFone

VeriFone DUET Vx810 Bedienungsanleitung

VeriFone

VeriFone V200c Bedienungsanleitung

VeriFone

VeriFone UX700 ML Bedienungsanleitung

VeriFone

VeriFone VX570 Bedienungsanleitung

VeriFone

VeriFone V200c Bedienungsanleitung

VeriFone

VeriFone Vx680 3G Series Bedienungsanleitung

VeriFone

VeriFone Topaz XL Einrichtungshandbuch

VeriFone

VeriFone T650m Bedienungsanleitung

VeriFone

VeriFone V400 Series Handbuch

VeriFone

VeriFone NURIT 8000 Bedienungsanleitung

VeriFone

VeriFone VX 520 Series Bedienungsanleitung

VeriFone

VeriFone V400m Referenzhandbuch

VeriFone

VeriFone VX690 Bedienungsanleitung

VeriFone

VeriFone Vx-520 Series APACS 40 Bedienungsanleitung

VeriFone

VeriFone V240m Bedienungsanleitung

VeriFone

VeriFone CM5P Bedienungsanleitung

VeriFone

VeriFone V400c Handbuch

VeriFone

VeriFone Carbon Mobile 5 Bedienungsanleitung

VeriFone

VeriFone VX 520 Series Bedienungsanleitung

VeriFone

VeriFone evolution series Bedienungsanleitung

VeriFone

VeriFone VX570 Montageanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung