Viavi OneAdvisor ONA-800 Stücklistenhandbuch

Andere Handbücher für OneAdvisor ONA-800

6

Inhaltsverzeichnis

Andere Viavi Messgerät Handbücher

Viavi

Viavi WiFi Advisor WFED-300AC Bedienungsanleitung

Viavi

Viavi OneExpert CATV Bedienungsanleitung

Viavi

Viavi Xgig Bedienungsanleitung

Viavi

Viavi OneAdvisor ONA-800 Bedienungsanleitung

Viavi

Viavi E4123MM Bedienungsanleitung

Viavi

Viavi FBP-SD4I-PRO Bedienungsanleitung

Viavi

Viavi MPOL*-85P Bedienungsanleitung

Viavi

Viavi WiFi Advisor WFED-300AC Bedienungsanleitung

Viavi

Viavi CellAdvisor 5G Bedienungsanleitung

Viavi

Viavi SmartPocket OLS-34V2 Bedienungsanleitung

Viavi

Viavi G3-GSP-2P100-8TSSD Handbuch

Viavi

Viavi T-BERD MTS 5800 Stücklistenhandbuch

Viavi

Viavi 3550 Stücklistenhandbuch

Viavi

Viavi SmartClass OLP-87 Stücklistenhandbuch

Viavi

Viavi ONX-220 Bedienungsanleitung

Viavi

Viavi SmartPocket OLP-37XV2 Bedienungsanleitung

Viavi

Viavi OneExpert ONX CATV 620 Bedienungsanleitung

Viavi

Viavi SmartPocket OLP-37X2 Bedienungsanleitung

Viavi

Viavi SmartClass Fiber OLP-87 NG-PON2 Bedienungsanleitung

Viavi

Viavi Xgig1000 Montageanleitung

Viavi

Viavi Seeker X Bedienungsanleitung

Viavi

Viavi T-BERD 6000A V2 Stücklistenhandbuch

Viavi

Viavi ALT-8000 Stücklistenhandbuch

Viavi

Viavi MP-60 Stücklistenhandbuch

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

VIAVI Solutions

Quick Card

OneAdvisor ONA-800

Measuring Light Levels with the MP-60 and MP-80 Optical

Power Meters

The following procedure outlines how to use the VIAVI ONA-800 equipped with an MP-60 or MP-80 external

USB Optical Power Meter.

Equipment Requirements:

•ONA-800 with Firmware version 1.1.0 or greater

•MP-60 or MP-80 USB Optical Power Meter

•Fiber optic cleaning and inspection tools

•Patch Cable with connectors matching the Power

Meter and Fiber Under Test

•Optical Coupler to connect Patch Cable to the

Fiber Under Test

Figure 1: Equipment Requirements

Figure 2: MP-60 Optical Power Meter

The following information is required to complete

the test:

•Type of Fiber (Multimode or Single Mode)

•Type of Connectors (SC UPC, SC APC, LC UPC, etc.)

•Wavelength of signal(s) to measure

Fiber Inspection Guidelines:

•All fiber end-faces must be clean and pass an

inspection test prior to connection.

•Use the VIAVI P5000i or FiberChek Probe

Microscope to inspect both sides of every

connection being used (SFP/QSFP Port, bulkhead

connectors, patch cables, etc.)

Figure 3: Inspect Before You Connect

Connect to the Fiber Under Test:

1. Insert the MP-60 or MP-80 into a USB port on the top of the ONA-800.

2. Open the flap to expose the Patch Cable Input. The Standard Patch Cable Input is 2.5mm and

supports SC, FC, and ST patch cables. A 1.25mm adapter is available as an option. To swap,

unscrew the existing adapter and carefully screw the desired adapter in its place.

VIAVI Solutions

Contact Us +1 844 GO VIAVI

(+1 844 468 4284)

To reach the VIAVI office nearest

you, visit viavisolutions.com/contacts.

© 2020 VIAVI Solutions Inc.

Product specifications and descriptions in this

document are subject to change without

notice.

3. Connect to the Fiber or Light Source under test:

•If the device under test is a patch cable with a ferule size that matches the Patch Cable Input on

the Power Meter, it can be inserted directly into the Patch Cable Input.

•If the device ender test is an Optical Patch Panel, SFP or other optical transceiver, use a patch

cable with connectors matching the Power Meter’s Patch Cable Input and the SFP or transceiver

under test.

Figure 4: Connecting the Power Meter to an OPP

Measure Absolute Power:

1. Press the Power button to turn on the ONA-800.

2. Tap the PowerMeter icon in the Status Bar at the top of the ONA-800.

3. Tap the Wavelength drop-down menu or scroll wheel to select the wavelength.

4. Tap the Display Units drop-down menu and set units to dBm.

5. View the power level in the USB Power Meter Summary Results display at the top of screen.

Figure 5: Summary View