Viavi MP-60 Stücklistenhandbuch

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Viavi Messgerät Handbücher

Viavi

Viavi CellAdvisor 5G Bedienungsanleitung

Viavi

Viavi ALT-8000 Bedienungsanleitung

Viavi

Viavi SmartPocket OLP-35SC Bedienungsanleitung

Viavi

Viavi Xgig Bedienungsanleitung

Viavi

Viavi SmartClass Fiber OLS-85 Bedienungsanleitung

Viavi

Viavi SmartPocket OLS-34V2 Bedienungsanleitung

Viavi

Viavi E4123MM Bedienungsanleitung

Viavi

Viavi SmartOTDR Stücklistenhandbuch

Viavi

Viavi MPOL*-85P Bedienungsanleitung

Viavi

Viavi T-BERD 6000A V2 Stücklistenhandbuch

Viavi

Viavi FiberChek Sidewinder Bedienungsanleitung

Viavi

Viavi CAA06M Bedienungsanleitung

Viavi

Viavi FFL-100 Bedienungsanleitung

Viavi

Viavi Seeker X Bedienungsanleitung

Viavi

Viavi OneExpert CATV Bedienungsanleitung

Viavi

Viavi OneAdvisor ONA-800 Stücklistenhandbuch

Viavi

Viavi OneExpert CATV Bedienungsanleitung

Viavi

Viavi SmartClass Fiber OLP-87 NG-PON2 Bedienungsanleitung

Viavi

Viavi WiFi Advisor WFED-300AC Bedienungsanleitung

Viavi

Viavi SmartClass ORL-85 Bedienungsanleitung

Viavi

Viavi ONX-220 Bedienungsanleitung

Viavi

Viavi Observer GigaStor GS-4P-16T Handbuch

Viavi

Viavi DSP TDR Bedienungsanleitung

Viavi

Viavi CellAdvisor JD700B Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

VIAVI Solutions

Quick Card

MP-60 and MP-80 USB Optical Power Meter

Measuring Absolute Power on the T-BERD/MTS-2000

The following procedure outlines how to use the VIAVI T-BERD/MTS-2000 equipped with an MP-60

or MP-80 external USB Optical Power Meter.

Equipment Requirements:

•T-BERD/MTS-2000 with Fiber Optics Software

Release V18.0

or greater

•MP-60 or MP-80 USB Optical Power Meter

•Fiber optic cleaning and inspection tools

•Patch Cable with connectors matching the

Power Meter and fiber under test

•Optical Coupler to connect Patch Cable to the

Fiber under Test

Figure 1: Equipment Requirements

The following information is required to complete the test:

•Type of Fiber (Multimode or Single Mode)

•Type of Connectors (SC UPC, SC APC, LC, etc.)

•Wavelength of signal(s) to measure

Figure 2: MP-60/MP-80 USB Power Meter

VIAVI Solutions

Contact Us +1 844 GO VIAVI

(+1 844 468 4284)

To reach the VIAVI office nearest you,

visit viavisolutions.com/contacts.

© 2019 VIAVI Solutions Inc.

Product specifications and descriptions in this

document are subject to change without notice.

Connect to Fiber Under Test (FUT):

The MP-60/80 may be connected to the Fiber under test via an optical patch panel (OPP) or an

optical coupler. All fibers and connectors should be inspected and clean prior to connection:

1. Insert the MP-60 or MP-80 into a USB port on the top of the T-BERD/MTS-2000.

2. If the interface to the Fiber Under Test is a patch cable, connect the patch cable to an optical

coupler with the same connector type.

3. Insert the Jumper Cable into MP-60 or MP-80 optical power meter.

4. Connect the Jumper Cable to the coupler or the OPP leading to the light source.

Figure 3: Connecting the Power Meter to an OPP or Coupler

Launch Test:

1. Press the power button to turn on the

test set.

2. Tap the USB Powermeter icon in the Home

Screen to access the LTS (Loss Test Set) Screen.

Figure 4: Home Screen

Measure Absolute Power:

1. Tap the Wavelength soft key set the

wavelength.

2. Tap the Display Units soft key to set units to

dBm.

3. View the power level in the Power Meter on

USB display in the center of the screen.

Figure 5: LTS Screen