Viavi Certifier Series Bedienungsanleitung

CERTIFIER40G

MPO Certification Testing

User Manual

Certifier Series (C40G)

Notices

No part of this manual may be reproduced in any form or by any means (including electronic

storage andretrievalor translation intoa foreignlanguage) without prior agreement and written

consent from Viavi Solutions as governed by international copyright Laws.

Warranty

The material contained in this document is provided “as is,” and is subject to being

changed, without notice, in future editions. Further, to the maximum extent permitted

by applicable law, disclaims all warranties, either express or implied, with regard to this

manual and any information contained herein, including but not limited to the implied

warranties of merchantability and fitness for a particular purpose. Viavi Solutions shall

not be liable for errors or for incidental or consequential damages in connection with

the furnishing, use, or performance of this document or of any information contained

herein. Should Viavi Solutions and the user have a separate written agreement with

warranty terms covering the material in this document that conflict with these Terms,

the warranty terms in the separate agreement shall control.

WARNING

A CAUTION notice denotes a hazard.

It calls attention to an operating procedure, practice, or the like that, if not

correctly performed or adhered to, could result in damage to the product or

loss of important data. Do not proceed beyond a CAUTION notice until the

indicated conditions are fully understood and met.

CAUTION

Operating procedure, practice, if not correctly performed or adhered to, could

result in personal injury or death. Do not proceed beyond a WARNING notice

until the indicated conditions are fully understood and met.

General Safety Information

WARNING

Do not use the device if it is damaged. Before you use the device, inspect the casing.

Look for cracks or missing plastic. Do not operate the device around explosive gas,

vapor, or dust.

Always use the device with the cables provided.

Observe all markings on the device before establishing any connection.

When servicing the device, use only the specified replacement parts.

Do not operate the device with the cover removed or loosened.

Use only the power adapter provided by the manufacturer to avoid any unexpected

hazards.

CAUTION

If the device is used in a manner not specified by the manufacturer, the device protection may

be impaired.

Always use dry cloth to clean the device. Do not use ethyl alcohol or any other volatile liquid to

clean the device.

Do not permit any blockage of the ventilation holes of the device.

Environmental Conditions

This instrument is designed for indoor use and in an area with low condensation. The table

below shows the general environmental requirements for this instrument

Environmental conditions Requirements

Operating Temperature 0 °C to 40 °C

Operating humidity 20% to 85% RH non-condensing

Relative humidity 10% to 80%

NOTE

The CERTIFIER40G, CERTIFIER10G complies with the following Safety and Regulatory

requirements.

DIN EN 55024, Edition:2003-10 (IEC/CISPR 24:1997, modified + A1:2001 + A2:2002); EN

55024:1998 + A1:2001 + A2:2003

DIN EN 55022; VDE 0878-22:2008-05 (IEC/CISPR 22:2005, modified + A1:2005); EN

55022:2006 + A1:2007

Regulatory Markings

The CE mark is a registered trademark of

the European Community. This CE mark

shows that the product complies with all

the relevant European Legal Directives.

Manufacturer‘s Name

Psiber Data Pte. Ltd

Manufacturer’s Address

3 Science Park Drive #03-08,

The Franklin Singapore Science Park 1,

Singapore 118223

Declares under sole responsibility that the product as originally delivered

Description

Cable Certification Tester Kit

Equipment

Cable Certifier

Complies with the essential requirements of the following applicable European Directives and

carries the CE marking accordingly:

DIN EN 55024, Edition:2003-10 (IEC/CISPR 24:1997, modified + A1:2001 + A2:2002); EN

55024:1998 + A1:2001 + A2:2003

DIN EN 55022;

VDE 0878-22:2008-05 (IEC/CISPR 22:2005, modified + A1:2005);

EN 55022:2006 + A1:2007

Signature

Arvind C Patel

Quality Management

Psiber Data Pte. Ltd.

www.psiberdata.com

Date :

December 14, 2010

Declaration of Conformity

Contents

Chapter 1: Getting Started ..................................................................................................................8

Unpacking the box................................................................................................................... 8

Chapter 2: Configuring Certifier.........................................................................................................9

Certifier User Interface............................................................................................................. 9

Touch Screen Layout................................................................................................................ 9

The One Touch Access Buttons ............................................................................................... 11

Chapter 3: Setting Reference............................................................................................................17

Chapter 4: Configuring an AUTOTEST............................................................................................19

Testing Guide for 12-core MPO Testing.................................................................................... 20

Chapter 5: Performing an AUTOTEST .............................................................................................21

Managing test result(s) .......................................................................................................... 23

Exporting test results into J-Report PC Software........................................................................ 24

Chapter 1: Getting Started

Unpacking the box

MPO

Power Meter (Local)

Adapter

Light Source (Remote)

Adapter

Type A Tail Cords

Type A Reference Cord

Type B Reference Cord

Mating Couplers

Chapter 2: Configuring Certifier

Certifier User Interface

Touch Screen Layout

The Graphical User Interface (GUI) in version 7.0’s firmware has been updated with a

more responsive system and quick-access menus.

Certifier boots up to the SETUP screen. It is categorised into 5 groups:

1. Status bar

2. Configuration group

3. Test Settings group

4. Project Settings group

5. System Settings group

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Viavi Prüfgeräte Handbücher

Viavi

Viavi T-BERD/MTS 2000 Bedienungsanleitung

Viavi

Viavi IFR 6000 Bedienungsanleitung

Viavi

Viavi HST-3000 Stücklistenhandbuch

Viavi

Viavi T-BERD/MTS-2000 Stücklistenhandbuch

Viavi

Viavi T-BERD MTS 5800 Bedienungsanleitung

Viavi

Viavi CT-X Bedienungsanleitung

Viavi

Viavi T-BERD 5800 Bedienungsanleitung

Viavi

Viavi 8000 V2 Platform Stücklistenhandbuch

Viavi

Viavi RGS-2000NG Bedienungsanleitung

Viavi

Viavi ALT-8000 Stücklistenhandbuch

Viavi

Viavi T-BERD/MTS 5800 Bedienungsanleitung

Viavi

Viavi T-BERD MTS 5800 Stücklistenhandbuch

Viavi

Viavi OBS-500 Bedienungsanleitung

Viavi

Viavi FBP-HD4i Bedienungsanleitung

Viavi

Viavi 3900 Series Bedienungsanleitung

Viavi

Viavi ONX 580 Bedienungsanleitung

Viavi

Viavi NSC-200 Bedienungsanleitung

Viavi

Viavi T-BERD MTS 5800 Stücklistenhandbuch

Viavi

Viavi 8000 V2 Platform Bedienungsanleitung

Viavi

Viavi HST-3000 Bedienungsanleitung

Viavi

Viavi SmartClass OLP-85 Series Bedienungsanleitung

Viavi

Viavi OLP-88 Bedienungsanleitung

Viavi

Viavi IFR 4000 Stücklistenhandbuch

Viavi

Viavi FBP-HD4iP Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung