Viessmann VITOCROSSAL 200 Betriebsanleitung

Service instructions

for contractors

VIESMANN

Vitocrossal 200

Type CM2, 400 to 620 kW

Gas condensing boiler with MatriX cylinder burner

For applicability, see the last page

VITOCROSSAL 200

5683 757 GB 9/2012 Please keep safe.

Please follow these safety instructions closely to prevent accidents and mate-

rial losses.

Safety instructions explained

Danger

This symbol warns against the

risk of injury.

!Please note

This symbol warns against the

risk of material losses and envi-

ronmental pollution.

Note

Details identified by the word "Note" con-

tain additional information.

Target group

These instructions are intended exclu-

sively for qualified contractors.

■ Work on gas installations must only be

carried out by a registered gas fitter.

■ Work on electrical equipment must

only be carried out by a qualified elec-

trician.

■ The system must be commissioned by

the system installer or a qualified per-

son authorised by the installer.

■ This appliance has not been designed

to be operated by individuals (includ-

ing children) with limited physical, sen-

sory or mental capacities or who are

lacking in the appropriate experience

and/or knowledge, unless they are

supervised by a person with responsi-

bility for their safety or were instructed

by that person in the operation of this

appliance.

!Please note

Children should be super-

vised.

Ensure that children never play

with the appliance.

Regulations

Observe the following when working on

this system:

■ Statutory regulations regarding the

prevention of accidents

■ Statutory regulations regarding envi-

ronmental protection

Safety instructions

5683 757 GB

■ Codes of practice of the relevant trade

associations.

■ All current safety regulations as

defined by DIN, EN, DVGW, TRGI,

TRF, VDE and all locally applicable

standards.

aÖNORM, EN, ÖVGW-TR Gas,

ÖVGW-TRF and ÖVE

cSEV, SUVA, SVGW, SVTI,

SWKI, VKF and EKAS Directive

1942: LPG, part 2

If you smell gas

Danger

Escaping gas can lead to explo-

sions which may result in serious

injury.

■ Do not smoke. Prevent naked

flames and sparks. Do not

press any switches for lights or

electrical appliances.

■ Close the gas shut-off valve.

■ Open windows and doors.

■ Remove all people from the

danger zone.

■ Notify your gas or electricity

supply utility from outside the

building.

■ Shut off the electricity supply to

the building from a safe place

(outside the building).

If you smell flue gas

Danger

Flue gas can lead to life-threat-

ening poisoning.

■ Shut down the heating system.

■ Ventilate boiler room.

■ Close all doors in the living

space.

Working on the system

■ Where gas is used as the fuel, close

the main gas shut-off valve and safe-

guard it against unintentional reopen-

ing.

■ Isolate the system from the power sup-

ply (e.g. at the separate fuse or a main

switch) and check that it is de-ener-

gised.

■ Safeguard the system against recon-

nection.

!Please note

Electronic assemblies can be

damaged by electrostatic dis-

charges.

Before beginning work, touch

earthed objects, such as heating

or water pipes, to discharge static

loads.

Repair work

!Please note

Repairing components that fulfil a

safety function can compromise

the safe operation of your sys-

tem.

Replace faulty components only

with original Viessmann spare

parts.

Safety instructions

Safety instructions (cont.)

5683 757 GB

Auxiliary components, spare and

wearing parts

!Please note

Spare and wearing parts that

have not been tested together

with the system can compromise

its function. Installing non-author-

ised components and making

non-approved modifications or

conversions can compromise

safety and may invalidate our

warranty.

For replacements, use only orig-

inal spare parts supplied or

approved by Viessmann.

Safety instructions

Safety instructions (cont.)

5683 757 GB

Commissioning, inspection, maintenance

Steps - commissioning, inspection and maintenance.......................................... 7

Further details regarding the individual steps....................................................... 9

Air pressure switch............................................................................................ 38

Burner control unit............................................................................................. 40

Troubleshooting

Fault display......................................................................................................... 47

Fault codes........................................................................................................... 48

Faults without fault display................................................................................... 54

Burner control unit flow chart........................................................................... 55

Connection diagrams

Burner control unit connection diagram................................................................ 57

Connection diagram for mains filter unit............................................................... 61

Component overview......................................................................................... 63

Control unit

Adjusting codes at the control unit....................................................................... 65

Parts lists

Ordering parts...................................................................................................... 66

Overview of the assemblies................................................................................. 67

Boiler body assembly........................................................................................... 68

Thermal insulation assembly................................................................................ 69

Cable kit assembly............................................................................................... 70

Burner assembly.................................................................................................. 71

Report.................................................................................................................. 74

Specification....................................................................................................... 79

Certificates

Declaration of conformity for boiler ≤400 kW....................................................... 81

Declaration of conformity for boiler >400 kW....................................................... 82

Certificates

Manufacturer's certificate..................................................................................... 83

Index

5683 757 GB

Keyword index.................................................................................................... 84

Index

Index (cont.)

5683 757 GB

For further information regarding the individual steps, see the page indicated

Commissioning steps

Inspection steps

Maintenance steps Page

•1. Checking the high limit safety cut-out setting............. 9

•2. Filling the heating system with water and venting...... 9

•3. Filling the siphon with water......................................... 9

•4. Checking the gas type.................................................... 10

•5. Converting to natural gas LL......................................... 10

•6. Converting to LPG P....................................................... 11

••• 7. Commissioning the system........................................... 13

•8. Reducing operational output (if necessary)................. 15

••• 9. Checking static pressure and supply pressure........... 16

••• 10. Checking the rotary damper setting............................. 18

••• 11. Checking the CO2 content............................................. 19

••• 12. Checking the CO content

••• 13. Checking the flue gas temperature

• • 14. Displaying the ionisation current.................................. 22

• • 15. Shutting down the system............................................. 23

• • 16. Opening the boiler door................................................. 26

• • 17. Cleaning the combustion chamber and heating

surfaces........................................................................... 27

• • 18. Checking gaskets and thermal insulation parts.......... 27

• • 19. Checking all connections on the heating water side

for leaks........................................................................... 28

• • 20. Cleaning and reconnecting the condensate drain

system............................................................................. 28

• • 21. Checking for tightness on the flue side....................... 30

• • 22. Checking the condensate drain and the neutralising

system (if installed)........................................................ 31

Commissioning, inspection, maintenance

Steps - commissioning, inspection and maintenance

5683 757 GB

Commissioning steps

Inspection steps

Maintenance steps Page

• • 23. Checking the burner gauze assembly.......................... 31

• • 24. Checking the ignition electrodes and ionisation

electrode.......................................................................... 32

• • 25. Cleaning the burner........................................................ 33

•26. Fitting the fan.................................................................. 33

•27. Making the electrical burner connection...................... 34

• • 28. Checking both gas train valves automatically for gas

tightness.......................................................................... 35

• • 29. Checking the filter element in the gas line (if installed)

and replacing if required

••• 30. Checking all gas connections for tightness................ 35

•31. Implementing final checks............................................. 35

• • 32. Checking the water quality............................................ 36

••• 33. Checking the function of safety valves

• • 34. Checking the expansion vessel and system pressure 36

• • 35. Checking the mixer for ease of operation and leaks... 37

••• 36. Checking the thermal insulation for firm seating

• • 37. Checking the ventilation air apertures in the

installation room (only for open flue operation)

•38. Instructing the system user........................................... 37

•39. Operating and service documents................................ 37

Commissioning, inspection, maintenance

Steps - commissioning, inspection and… (cont.)

5683 757 GB

Checking the high limit safety cut-out setting

The high limit safety cut-out is preset to

110 °C. If this temperature needs to be

changed, this can only be done by swap-

ping the coding card.

Filling the heating system with water and venting

Record the charge volume, water hard-

ness and pH value on page 36.

Note

Observe the "Water quality require-

ments" on page 75.

Filling the siphon with water

1. Undo four screws and from the back

remove the centre and bottom back

panels.

2. Undo the siphon and fill with water

(otherwise flue gas may escape).

3. Check that the condensate can drain

freely.

4. Refit the siphon.

Note

The hose connection to the on-site

condensate system or to the neutral-

ising system must not be permitted to

sag; support with a pipe if neces-

sary.

Commissioning, inspection, maintenance

Further details regarding the individual steps

5683 757 GB

Checking the gas type

1. Check the gas type and Wobbe index

(Wo) with your gas supply utility.

■ With the natural gas E setting, the

boiler can be operated in the

Wobbe index range 12.0 to

16.1 kWh/m3 (43.2 to 58.0 MJ/m3).

■ The natural gas LL setting ena-

bles boilers to be operated in the

Wobbe index range 10.0 to

13.1 kWh/m3 (36.0 to 47.2 MJ/m3)

(not in a and c).

■ With the LPG P setting, the boiler

can be operated in the Wobbe

index range 20.3 to 21.3 kWh/m3

(72.9 to 76.8 MJ/m3).

2. In the delivered condition, the burner

is set up for natural gas E. If required,

convert the burner to a different gas

type in accordance with details provi-

ded by your gas supply utility (see

from page 10).

3. Record the gas type in the report (on

page 74).

Converting to natural gas LL

(not in a and c)

01. Close the gas shut-off valve.

02. Switch OFF the ON/OFF switch on

the control unit.

03. Switch OFF the mains isolator (out-

side the installation room) or isolate

the mains power and secure against

unintentional reconnection.

04. Undo fitting A from the gas supply

pipe.

05. Pull compensation hose G from

the gas train.

06. Release the gas train from flange

07. Remove restrictor C with rubber

cork gasket D.

Commissioning, inspection, maintenance

Further details regarding the individual steps (cont.)

5683 757 GB

Andere Handbücher für VITOCROSSAL 200

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Viessmann Kessel Handbücher

Viessmann

Viessmann VITOCELL 300V Gebrauchsanweisung

Viessmann

Viessmann VITOCROSSAL 300 Bedienungsanleitung

Viessmann

Viessmann VITORADIAL 300-T Betriebsanleitung

Viessmann

Viessmann VITOFLEX 300-UF Gebrauchsanweisung

Viessmann

Viessmann VITOPLEX 300 Betriebsanleitung

Viessmann

Viessmann VITOMAX 200-HW Bedienungsanleitung

Viessmann

Viessmann CM2-620 TX Bedienungsanleitung

Viessmann

Viessmann B1HA Bedienungsanleitung

Viessmann

Viessmann Vitodens 100-W WB1B Series Bedienungsanleitung

Viessmann

Viessmann VITOPLEX 200 Type SX2A Kurzanleitung

Viessmann

Viessmann Vitorond 100 Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 WB2 Series Bedienungsanleitung

Viessmann

Viessmann VITOLIGNO 300-P Betriebsanleitung

Viessmann

Viessmann VITODENS 333 Betriebsanleitung

Viessmann

Viessmann Vitodens 222-F Kurzanleitung

Viessmann

Viessmann VITOPLEX 200 Type SX2A Bedienungsanleitung

Viessmann

Viessmann VITOCROSSAL 200 Betriebsanleitung

Viessmann

Viessmann VITOCROSSAL 300 Bedienungsanleitung

Viessmann

Viessmann Vitocell-B 100 CVB Series Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 Bedienungsanleitung

Viessmann

Viessmann Vitodens 100-W B1HA Benutzerhandbuch

Viessmann

Viessmann Vitodens 100-W Kurzanleitung

Viessmann

Viessmann VITOCROSSAL 300 Betriebsanleitung

Viessmann

Viessmann Vitosorp 200-F Bedienungsanleitung

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung

Radiant

Radiant R2K 55 Handbuch