Viotek GFI34CB Bedienungsanleitung

GFI34CB

34" GAMING MONITOR

USER MANUAL

In order to continue serving our customers and providing the best products, our product information

including our user manuals may receive updates from time to time. Please check our website for the

latest user manuals and product materials.

Table of Contents

Section 1: Safety Precautions................................................................4

Section 2: Box Contents.........................................................................5

Section 3: Product Overview .................................................................6

3.1 – Monitor Buttons .........................................................................6

3.2 – Monitor Ports.............................................................................6

Section 4: Stand Installation..................................................................7

Section 5: Wall Mounting........................................................................8

Section 6: Basic Operation ....................................................................9

Section 7: Indicator Light .......................................................................10

Section 8: OSD Setup .............................................................................10

8.1 – OSD Menu Functions ................................................................11

Section 9: ECO Modes and Gameplus Switching................................13

Section 10: Troubleshooting..................................................................14

Section 11: Speciﬁcations......................................................................15

Section 12: Cleaning ...............................................................................16

Section 13: Three-Year Limited Hardware Warranty ...........................16

Section 1: Safety Precautions

Read and observe the following warnings and information below.

1. Before cleaning, always unplug your monitor. It is recommended that you use

dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however,

the safest. If using damp cloth, wait for your monitor to completely dry before

plugging it in again.

2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your

monitor.

3. This monitor features ventilation openings on the back of the unit. Avoid blocking

these openings to prevent the monitor from overheating.

4. Avoid placing this monitor near any heat sources, e.g., portable heaters or

heating vents, as this may cause damage to your monitor.

5. Do not spray cleaner and or any kind of liquid directly onto the monitor’s screen

or any part of the monitor.

6. Do not insert anything into any part of the monitor especially the ventilation

openings.

7. Always make sure your monitor is placed on a secure, level surface to prevent it

from falling and sustaining damage.

8. Unplug your monitor during any extended periods of non-use.

9. Do not place heavy items on the monitor or monitor cables.

10. Do not attempt to disassemble or remove parts from the monitor. Any

disassembly or modication not performed by an authorized technician can

result in damage to the monitor and/or possible exposure to high voltage

electricity which may lead to serious injury or death.

VIOTEK®shall not be held responsible for injury or damage of products or persons

due to failure to adhere to the aforementioned precautions or any others noted

hereafter.

The terms HDMI and HDMI High-Denition Multimedia Interface, and

the HDMI Logo are trademarks or registered trademarks of HDMI

Licensing Administrator, Inc. in the United States and other countries.

Section 2: Box Contents

Monitor x 1 Stand Stem x 1 Stand Base x 1

Stand Plate x 1DP Cable x 1 User Manual x 1Power Adapter &

Power Cable x 1

NO. 2 Screws x 3

(for Base Installation)

Extra screws may be included as backup.

NO. 3 Screws x 4

(for Wall Mounting)

NO. 1 Screws x 2

(for Stand Installation)

Section 3: Product Overview

3.1 – Monitor Buttons

6 Audio Output: Insert one end of the audio cable into an external audio

source, e.g., speakers or headphones, to pass audio signals through the

monitor.

7 HDMI 1.4 Connectors: Insert one end of the HDMI cable into the

computer’s HDMI output and connect the other end to the monitor’s HDMI port.

8 DisplayPort (DP) 1.2 Connector: Insert one end of the DP cable into the

computer’s DP output and connect the other end to the monitor’s DP port.

9 DC IN Power Connector: Insert the power cable to supply power to the monitor.

86 97

1 M Menu Button: Press to display the OSD menu or enter sub-menus.

2 Up Button: Press to move up in the menus.

3 Down Button: Press to move down in the menus.

4 E Exit Button:Press to exit.

5 Power Button: Press to turn the monitor on/off.

3.2 – Monitor Ports

HDMI 2HDMI 1

Section 4: Stand Installation

1. Open the package and take out the product with foam still attached. Gently place

it on a desktop or table.

2. Press the button at the bottom of stand plate to remove the stand plate from the

opening on the back of monitor.

3. Take out the stand and insert it into the stand plate hole, then use a screwdriver

(not included) and two NO.1 screws to fasten stand plate onto the stand.

Stand Plate

Button

Stand Stem

NO. 1 Screws x 2

4. Take out the base, use a screwdriver (not included) and three NO.2 screws to

fasten it onto the stand stem.

5. Insert the stand plate back into the opening on the back of monitor and lock it in

place.

NO. 2 Screws x 3

If needed, the stand can easily be detached from the monitor by pressing the

button at the bottom of stand plate. Gently place monitor face-down on a at

surface, then unscrew the stand to remove it.

Section 5: Wall Mounting

VESA and/or mounting accessories not included.

1. Open the package and take out the monitor with the foam still attached. Gently

place it on a desktop or table. If the monitor is attached to the stand, remove

the stand by pressing the button on the back of the monitor just below the stand

plate.

2. Remove the stand plate from the back of the monitor, and attach the four NO. 3

screws into the mounting holes at the back of the monitor.

NO. 3 Screws x4

Stand Plate

3. Follow the directions that came with your mounting kit (not included) to mount

the monitor on the wall or monitor stand.

Wall

Mounting Base

(Not included)

Section 6: Basic Operation

1. Insert one end of the DP cable into your PC’s graphics card. An HDMI cable may

also be used. HDMI cable not included.

For optimal refresh rate (or “performance”), it is recommended to use a DP

cable with the monitor’s corresponding connector.

2. Connect the other end of the cable to the corresponding connector on your

monitor. See the image below.

HDMI 2HDMI 1

DP 1.2

3. Connect the power cable to your monitor then connect the other end to your

power source. It is recommended that you use a surge protector with adequate

voltage if a wall outlet cannot be reached directly.

4. Locate the power button on the monitor and press it to turn the monitor on.

5. Carefully adjust monitor’s angle as desired.

-5.0°(±2.0°)- +15°(±2.0°)

-5°

+15°

VIOTEK Adaptive Sync

Adaptive sync eliminates image tearing, stuttering and ghosting by adjusting of a monitor’s

vertical refresh rate to the frame rate of the graphics card. It is compatible with GPUs that

use AMD® FreeSync™ or NVIDIA® G-Sync™. The feature is off on VIOTEK monitors by

default and must be manually enabled in the monitor’s OSD (see Section 8: OSD). To use

this feature, the connecting device must be compatible with adaptive sync (FreeSync and/or

G-Sync); have the latest graphic drivers; and be connected to the monitor using a DisplayPort

(DP) cable.

Section 7: Indicator Light

Solid blue light indicates power is on

and the monitor is operating normally.

Red light indicates no video source, no

horizontal or vertical signal has been

detected or voltage is low. Please ensure

your computer is on and all video cables

are fully inserted and/or connected.

Section 8: OSD Setup

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings

and appears on screen after turning on the monitor and pressing the Mbutton.

When using the monitor for the rst time, settings will automatically adjust to

optimal settings according to your computer’s conguration.

1. Press any one of the buttons (M, , , E, ) to activate the navigation window.

LED Indicator

Inhaltsverzeichnis

Andere Viotek Monitor Handbücher

Viotek

Viotek NFI24DBA Bedienungsanleitung

Viotek

Viotek GFI27DBXA Bedienungsanleitung

Viotek

Viotek GFT27CXB2 Bedienungsanleitung

Viotek

Viotek GFV24C Bedienungsanleitung

Viotek

Viotek GN35DA Bedienungsanleitung

Viotek

Viotek GN35LD Bedienungsanleitung

Viotek

Viotek GFV27DAB Bedienungsanleitung

Viotek

Viotek GNV27DB2 Bedienungsanleitung

Viotek

Viotek GFI24CBA Bedienungsanleitung

Viotek

Viotek SUW49DA2 Bedienungsanleitung

Viotek

Viotek GN32DB Bedienungsanleitung

Viotek

Viotek GNV27CB Bedienungsanleitung

Viotek

Viotek NBV24CB2 Bedienungsanleitung

Viotek

Viotek GN27CB Bedienungsanleitung

Viotek

Viotek GNV30CB Bedienungsanleitung

Viotek

Viotek GN35DR Bedienungsanleitung

Viotek

Viotek RFI25CBA Bedienungsanleitung

Viotek

Viotek GFT27DB Bedienungsanleitung

Viotek

Viotek GNV29CB Bedienungsanleitung

Viotek

Viotek GN32LD Bedienungsanleitung

Viotek

Viotek GNV32CBO Bedienungsanleitung

Viotek

Viotek GFV22CB Bedienungsanleitung

Viotek

Viotek NBV27CB Bedienungsanleitung

Viotek

Viotek GNV34DB2 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung