Viotek GN27C2 Bedienungsanleitung

ORCURVED GAMING MONIT

USER MANUAL

GN27C2

In order to continue serving our customers and providing the best products, our product information

including our user manuals may receive updates from time to time. Please check our website for the latest

user manuals and product materials. ver.1.0 05/24/18

Table of Contents

Section 1: Safety Precautions..................................................... 4

Section 2: Box Contents.............................................................. 5

Section 3: Product Overview....................................................... 6

3.1 – Monitor Buttons ............................................................... 6

3.2 – Monitor Ports................................................................... 6

Section 4: Stand Installation ....................................................... 7

Section 5: Mount Installation ...................................................... 8

Section 6: Connectivity Options................................................. 9

6.1 – Removing the Port Cover ................................................ 9

6.2 – Connecting the Power Cable .......................................... 9

6.3 – DP Connectivity .............................................................. 10

6.4 – HDMI Connectivity .......................................................... 10

Section 7: Basic Operation.......................................................... 11

Section 8: Indicator Light ............................................................ 11

Section 9: OSD Setup................................................................... 12

9.1 – OSD Menu Functions ...................................................... 13

Section 10: ECO Modes and Gameplus Switching ................... 14

Section 11: Troubleshooting........................................................ 15

Section 12: Speciﬁcations........................................................... 16

12.1 – Resolution Compatibility for DP..................................... 16

Section 13: 1 Year Limited Hardware Warranty......................... 17

Section 1: Safety Precautions

Read and observe the following warnings and information below.

1. Before cleaning, always unplug your monitor. It is recommended that you use dry cloth or

lightly damp cloth to clean your monitor. Dry cloth is, however, the safest. If using damp

cloth, wait for your monitor to completely dry before plugging it in again.

2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your monitor.

3. This monitor features ventilation openings on the back of the unit. Avoid blocking these

openings to prevent the monitor from overheating.

4. Avoid placing this monitor near any heat sources e.g: portable heaters or heating vents,

as this may cause damage to your monitor.

5. Do not spray cleaner and or any kind of liquid directly onto the monitor’s screen or any

part of the monitor.

6. Do not insert anything into any part of the monitor especially the ventilation openings.

7. Always make sure your monitor is placed on a secure, level surface to prevent it from

falling and sustaining damage.

8. Unplug your monitor during any extended periods of non-use.

9. Do not place heavy items on the monitor or monitor cables.

10. Do not attempt to disassemble or remove parts from the monitor. Any disassembly or

modiﬁcation etc. not performed by an authorized technician can result in damage to the

monitor and/or possible exposure to high voltage electricity which may lead to serious

injury or death.

VIOTEK®shall not be held responsible for injury or damage of products or persons due to

failure to adhere to the aforementioned precautions or any others noted hereafter.

Section 2: Box Contents

Monitor x 1 Stand Stem x 1 Stand Base x 1

Power Cable x 1

(AC 100-240V, 50/60Hz)

NO. 2 Screws x 4

(for Mounting)

NO.1 Screws x 3

(for Stand Installation) DP Cable x 1

Screwdriver x 1 User Manual x 1

• The NO. 1 Screws come in two sizes: 12mm x 2 and 14mm x 1

• The NO. 2 Screws come in two sizes: 26mm x 2 and 30mm x 2.

26mm

30mm

14mm

12mm

Section 3: Product Overview

3.1 – Monitor Buttons

8 HDMI Connector: Insert one end of the HDMI cable into the computer’s HDMI output

and connect the other end to the monitor’s HDMI port.

9 DP Connector: Insert one end of the DP cable into the computer’s DP output and

connect the other end to the monitor’s DP port.

8 9

1 3 4 5 6 72

1 Power Connector: Insert the power cable to supply power to the monitor.

2 M Menu Button: Press to display the OSD menu or enter sub-menus.

3 Down Button: Press to move down in the menus.

4 Up Button: Press to move up in the menus.

5 E Exit Button:Press to exit.

6 Power Button: Press to turn the monitor on/off.

7 LED Indicator: Changes colors to indicate status. Refer to Section 8.

The E button can also be used to switch between two color gamuts when a compatible

graphics card and either HDMI or DP connections are in use.

3.2 – Monitor Ports

Section 4: Stand Installation

Keep the foam over the monitor before attaching the stand. Follow the steps below to

ﬁnish the installation.

1. Open the package, take out the product with foam still attached, and gently place it on a

desktop or table.

Monitor

Stand Base

Foam

Stand Stem

2. Take out the two parts of the stand, remove the foam covering the back of the monitor, and

press the button to remove the stand plate.

Button

Stand Plate

3. Use the included screwdriver and two 12mm NO.1 screws to fasten the stand plate to the

stem. Next, use the remaining 14mm stand screws to fasten the base to the stem.

NO.1 Screw

14mm x 1

Stand Stem

NO.1 Screws

12mm x 2

4. Insert the stand’s plate into the opening on the back of the monitor. It should click into

place. Make sure the stand is securely attached to the back of the monitor then remove the

monitor from the remaining foam section and stand it up on a table or desk as desired.

If needed, the stand can easily be detached from the monitor by pressing the button near

the stand plate. Make sure the monitor is laid on a ﬂat surface before removing the stem.

Monitor

Stem

Stand Plate

Button

Section 5: Mount Installation

This monitor ONLY includes screws which may be used when attaching the

monitor to a VESA 75x75mm type mount. No VESA mount or mounting accessory

is included.

1. Open the package, take out the product with foam still attached, and gently place it on a

desktop or table. If the monitor is attached to the stand, remove the stand.

Stand Base

Foam

Stand Stem

2. Take out the two parts of the stand, remove the foam covering the back of the monitor, and

press the button to remove the stand plate.

Button

Stand Plate

3. Remove the original screws x 4 ( 1) from the opening in the back of the monitor, then use

the NO. 2 screws provided to secure the rear panel.

4. Follow the directions received with your VESA mount stand or accessory and install the

monitor on the wall or ﬁxture as desired. Remember to use the included NO. 2 screws

when attaching anything to the back of the monitor. Refer to the image ( 2) for correct

screw placement when attaching the monitor to a mount.

Use the 30mm

NO. 2 Screws x 2

Use the 26mm

NO. 2 Screws x 2

- Use only the NO. 2 Screws (30 mm x 2 pcs, 26mm x 2 pcs) provided with this

type of installation.

- Do not discard the original screws as these may be needed for future use.

Mount

(Not included)

Section 6: Connectivity Options

6.1 – Removing the Port Cover

Before connecting any cables, remove the port cover ﬁrst.

Port Cover

Back of Monitor

6.2 – Connecting the Power Cable

Connect the included power cable to the power connector, and then plug the other end into an

wall outlet.

Power Cable

6.3 – DP Connectivity

In order for the monitor to receive DP signals from the computer, use the DP cable to connect

the monitor to the computer.

DP OUTPUT

DP Cable (Included)

6.4 – HDMI Connectivity

In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to

connect the monitor to the computer.

HDMI OUTPUT

HDMI Cable (Not included)

Section 7: Basic Operation

When connecting or disconnecting any cables, it is recommended to remove the port

cover ﬁrst. Refer to Section 6.1.

1. Insert one end of the DP cable into your PC’s graphics card. HDMI may also be used.

HDMI cable not included.

For optimal refresh rate (or “performance”), it is recommended to use a DP (display port)

cable with the monitor’s corresponding connector.

2. Connect the other end of the cable to the corresponding connector on your monitor. See

the image below.

HDMI Connectors

DP Connector

3. Connect the power cable to your monitor then connect the other end to your power

source. It is recommended that you use a surge protector with adequate voltage if a wall

outlet cannot be reached directly.

4. Locate the power button on the monitor and press it to turn the monitor on.

If you cannot locate the power button, please refer to Section 3.1.

FreeSync

If desired, you can use the monitor’s FreeSync feature. The feature itself is on by default. In

order to use this feature, please note you must have hardware with FreeSync capability, a DP

cable, and the latest graphic drivers. To use this feature, connect the appropriate cable to the

DP connectors on both the computer and monitor. After connecting, you will receive a prompt

to enable the feature on your computer.

Section 8: Indicator Light

This light is located on the bottom of the monitor.

Indicator Light

Bottom View

Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light

indicates no video source has been detected. Red light indicates that no horizontal or vertical

signal has been detected or voltage is low. Please ensure your computer is on and all video

cables are fully inserted and/or connected.

Inhaltsverzeichnis

Andere Viotek Monitor Handbücher

Viotek

Viotek SUW49DA Bedienungsanleitung

Viotek

Viotek GNV34DB Bedienungsanleitung

Viotek

Viotek GN35DR Bedienungsanleitung

Viotek

Viotek GN34C Bedienungsanleitung

Viotek

Viotek GN34CW Bedienungsanleitung

Viotek

Viotek GFV24C Bedienungsanleitung

Viotek

Viotek GN35LD Bedienungsanleitung

Viotek

Viotek GN27DW Bedienungsanleitung

Viotek

Viotek NFI29CB Bedienungsanleitung

Viotek

Viotek NB32CW Bedienungsanleitung

Viotek

Viotek FI24D Bedienungsanleitung

Viotek

Viotek NB24CW Bedienungsanleitung

Viotek

Viotek GNV34DBE2 Bedienungsanleitung

Viotek

Viotek GN32LD Bedienungsanleitung

Viotek

Viotek GFV27DAB Bedienungsanleitung

Viotek

Viotek GNV29CB Bedienungsanleitung

Viotek

Viotek GFV22CB Bedienungsanleitung

Viotek

Viotek GN32C Bedienungsanleitung

Viotek

Viotek GN32DR Bedienungsanleitung

Viotek

Viotek NV32Q Bedienungsanleitung

Viotek

Viotek NBV27CB Bedienungsanleitung

Viotek

Viotek GN32DB Bedienungsanleitung

Viotek

Viotek GN27CB Bedienungsanleitung

Viotek

Viotek GNV27CB Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung