Viotek NBV24CB Bedienungsanleitung

NBV24CB

In order to continue serving our customers and providing the best products, our product

information including our user manuals may receive updates from time to time. Please

check our website for the latest user manuals and product materials.

Table of Contents

Section 1: Safety Precautions ............................................ 4

Section 2: Box Contents ..................................................... 5

Section 3: Product Overview.............................................. 6

3.1 – Monitor Buttons ....................................................... 6

3.2 – Monitor Ports .......................................................... 6

Section 4: Stand Installation .............................................. 7

Section 5: Wall Mounting .................................................... 8

Section 6: Basic Operation................................................. 9

Section 7: Indicator Light.................................................... 9

Section 8: OSD Setup.......................................................... 10

8.1 – OSD Menu Functions .............................................. 11

Section 9: ECO Modes and Gameplus............................... 12

Section 10: Troubleshooting............................................... 12

Section 11: Speciﬁcations .................................................. 13

Section 12: One-Year Limited Hardware Warranty ........... 14

Section 1: Safety Precautions

Read and observe the following warnings and information below.

1. Before cleaning, always unplug your monitor. It is recommended that you use

dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however,

the safest. If using damp cloth, wait for your monitor to completely dry before

plugging it in again.

2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your

monitor.

3. This monitor features ventilation openings on the back of the unit. Avoid blocking

these openings to prevent the monitor from overheating.

4. Avoid placing this monitor near any heat sources, e.g., portable heaters or

heating vents, as this may cause damage to your monitor.

5. Do not spray cleaner and or any kind of liquid directly onto the monitor’s screen

or any part of the monitor.

6. Do not insert anything into any part of the monitor especially the ventilation

openings.

7. Always make sure your monitor is placed on a secure, level surface to prevent it

from falling and sustaining damage.

8. Unplug your monitor during any extended periods of non-use.

9. Do not place heavy items on the monitor or monitor cables.

10. Do not attempt to disassemble or remove parts from the monitor. Any

disassembly or modication not performed by an authorized technician can

result in damage to the monitor and/or possible exposure to high voltage

electricity which may lead to serious injury or death.

VIOTEK®shall not be held responsible for injury or damage of products or persons

due to failure to adhere to the aforementioned precautions or any others noted

hereafter.

The terms HDMI and HDMI High-Denition Multimedia Interface, and

the HDMI Logo are trademarks or registered trademarks of HDMI

Licensing Administrator, Inc. in the United States and other countries.

Section 2: Box Contents

Monitor x 1 Stand Stem x 1 Stand Base x 1

HDMI Cable x 1 User Manual x 1Power Cable x 1

NO. 1 Screws x 2

(for Stand Installation)

NO. 2 Screws x 4

(for Wall Mounting)

20mm

26mm

Extra screws may be included as backup.

Section 3: Product Overview

3.1 – Monitor Buttons

7 HDMI Connectors: Insert one end of the HDMI cable into the computer’s

HDMI output and connect the other end to the monitor’s HDMI port.

8 VGA Connector: Insert one end of the VGA cable into the computer’s VGA

output and connect the other end to the monitor’s VGA port.

9 Audio Output: Insert one end of the audio cable into an external audio

source, e.g., speakers or headphones, to pass audio signals through the

monitor.

10 DC IN Power Connector: Insert the power cable to supply power to the monitor.

87 109

2 3 4 5 61

1 M Menu Button: Press to display the OSD menu or enter sub-menus.

2 Down Button: Press to move down in the menus.

3 Up Button: Press to move up in the menus.

4 E Exit Button:Press to exit.

5 Power Button: Press to turn the monitor on/off.

6 LED Indicator: Changes colors to indicate status. Refer to Section 7.

3.2 – Monitor Ports

Section 4: Stand Installation

1. Open the package and take out the product with foam still attached. Gently place

it on a desktop or table.

2. Take out the stem and base. Insert the stem into the base opening and turn it

clockwise to lock in place. Then use the included screwdriver and one screw to

fasten base to the stem.

Opening

Stand

NO. 1 Screw

3. Attach the stand to monitor via the opening on the back. It should click into place.

Make sure the stand is securely attached to the back of the monitor then remove

the monitor from the remaining foam section and stand it up on the desired

surface.

Button

If needed, the stand can easily be detached from the monitor by pressing the

button on the back of the monitor just above the stand. Make sure the monitor is

laid on a at surface then press the button and pull the stand away to remove it.

Section 5: Wall Mounting

VESA and/or mounting accessories not included.

1. Open the package, take out the monitor with the foam still attached, and gently

place it on a desktop or table. If the monitor is attached to the stand, remove the

stand by pressing the button on the back of the monitor just above the stand.

2. At the back of the monitor, attach the four NO. 2 screws onto the mounting holes

on back of monitor.

26mm NO. 2 Screws x 2

20mm NO. 2 Screws x 2

3. Follow the directions that came with your mounting kit (not included) to mount

the monitor on the wall or monitor stand.

Wall

Mounting Base

(Not included)

Section 6: Basic Operation

1. Insert one end of the HDMI cable into your PC’s graphics card. A VGA cable

may also be used. A VGA cable is not included.

2. Connect the other end of the cable to the corresponding connector on your

monitor.

HDMI Port

VGA Port

3. Connect the power cable to your monitor, then connect the other end to your

power source. It is recommended that you use a surge protector with adequate

voltage if a wall outlet cannot be reached directly.

4. Locate the power button on the monitor and press it to turn the monitor on.

If you cannot locate the power button, please refer to Section 3.1.

AMD FreeSync

The feature itself is off by default. In order to use this feature, please note you must

have hardware with FreeSync capability, an HDMI cable, and the latest graphic

drivers. To use this feature, connect your computer and monitor with an HDMI

cable. After connecting, you may receive a prompt to enable the feature on your

computer. If you do not receive the prompt, you may need to enable the function in

your graphics card menu. See your graphics card manufacturer’s documentation for

instructions on how to turn on and/or enable FreeSync.

Section 7: Indicator Light

Indicator Light

Solid blue light indicates power is on and the monitor is operating normally. Flashing

blue light indicates no video source, no horizontal or vertical signal has been

detected or voltage is low. Please ensure your computer is on and all video cables

are fully inserted and/or connected.

Section 8: OSD Setup

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings

and appears on screen after turning on the monitor and pressing the Mbutton.

When using the monitor for the rst time, settings will automatically adjust to

optimal settings according to your computer’s standard conguration settings.

1. Press any one of the buttons (M, , , E, ) to activate the navigation window.

eco

2. Press M( ) to enter the OSD menu.

BRIGHTNESS

CONTRAST

ECO

DCR

STANDARD

OFF

3. Press or to browse functions.

• Highlight the desired function, then press Mto enter the sub-menu.

• Press or to browse sub-menus, then press Mto highlight the desired

function.

• Press or to highlight an option, then press M to conrm the settings and exit

the current screen.

4. Press E( ) to exit the current screen.

Inhaltsverzeichnis

Andere Viotek Monitor Handbücher

Viotek

Viotek GN27CB Bedienungsanleitung

Viotek

Viotek GFV27DAB Bedienungsanleitung

Viotek

Viotek H270 Bedienungsanleitung

Viotek

Viotek GNV29CB Bedienungsanleitung

Viotek

Viotek GNV34DBE2 Bedienungsanleitung

Viotek

Viotek H250 Bedienungsanleitung

Viotek

Viotek GN35LD Bedienungsanleitung

Viotek

Viotek GFI34CB Bedienungsanleitung

Viotek

Viotek GNV30CBXA Bedienungsanleitung

Viotek

Viotek NFI24DBA Bedienungsanleitung

Viotek

Viotek GN27DW Bedienungsanleitung

Viotek

Viotek GN34CW Bedienungsanleitung

Viotek

Viotek GNV34DB2 Bedienungsanleitung

Viotek

Viotek NFI29CB Bedienungsanleitung

Viotek

Viotek GN32DB Bedienungsanleitung

Viotek

Viotek GFI24CBA Bedienungsanleitung

Viotek

Viotek GFT27CXB2 Bedienungsanleitung

Viotek

Viotek GN32DR Bedienungsanleitung

Viotek

Viotek LinQ Bedienungsanleitung

Viotek

Viotek GFV24C Bedienungsanleitung

Viotek

Viotek GFV24CB Bedienungsanleitung

Viotek

Viotek LinQ Touch Bedienungsanleitung

Viotek

Viotek NB32CW Bedienungsanleitung

Viotek

Viotek GNV27DB Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung