Viper 4115V Bedienungsanleitung

OWNER’S GUIDE MODEL

The company behind Viper®Auto Security

Systems is Directed.

Since its inception, Directed has had one pur-

pose, to provide consumers with the finest

vehicle security products and accessories

available. The recipient of nearly 100 pat-

ents and Innovations Awards in the field of

advanced electronic technology.

Quality Directed products are sold and ser-

viced throughout North America and around

the world.

Call (800) 876-0800 for more information

about our products and services.

Directed is committed to delivering

world class quality products and

services that excite and delight our

customers.

No oNe Dares

Come Close ®

4115V

Vista, CA 92081

www.viper.com

Congratulations

Congratulations on the purchase of your remote start system. This sys-

tem has been designed to provide years of trouble-free operation. By

carefully reading this owner’s guide prior to using your system, you will

maximize the use of this system and its features. For more information

please visit us online at: www.viper.com. For any additional questions

please contact your authorized Directed dealer or contact Directed at

1-800-361-7271 (Canada only) or 1-800- 753- 0600 (U.S. only)

Additional support is also available at: http://support.directed.com

What you get

• Two 1-way remote controls (p/n 7111V)

• Owner's guide & Warranty card

Important Information

Government Regulations and Safety information

Read the Government Regulations and Warning! Safety

First sections of this manual prior to operating this system.

Warning! Failure to heed this information can result in

death, personal injury or property damage and may also

result in the illegal use of the system beyond its intended

purpose.

Your Warranty

Your system comes with a warranty. Make sure that you receive the

warranty registration card and proof of purchase from your dealer,

indicating the product was installed by an authorized Directed dealer.

Please validate it online at www.prodregister.com/directed or com-

plete and return the warranty registration card.

Battery Information

The remote control is powered by a single coin cell battery (CR-2032)

that can be purchased at most retailers. The operating range diminishes

as the battery charge depletes.

Battery Disposal

Directed cares about the environment. If you need to dispose

of the battery, please do so in accordance with your munici-

pal requirements for battery disposal or return to Directed.

Contents

Congratulations ................................................................................................1

What you get ................................................................................................1

Important Information ........................................................................................1

Battery Information............................................................................................2

Battery Disposal .......................................................................................2

Using Your System ...........................................................................................4

Commands At a Glance ............................................................................4

Start Engine .............................................................................................4

Unlock Doors ...........................................................................................4

Stop Engine .............................................................................................4

Car Finder ...............................................................................................4

Using Remote Start............................................................................................5

Key Takeover............................................................................................5

Safety Features.........................................................................................6

Pit Stop....................................................................................................6

Optional Rear Defogger ............................................................................7

Starter Anti-Grind Circuitry.........................................................................7

Disabling the Remote Start System ..............................................................7

Rapid Resume Logic .........................................................................................7

Remote Programming ........................................................................................8

Programming Options........................................................................................8

Patent Information .............................................................................................9

Government Regulations ..................................................................................10

Warning! Safety first .......................................................................................11

Installation .............................................................................................11

Remote Start Capable .............................................................................11

Interference............................................................................................12

Upgrades ..............................................................................................12

Water/Heat Resistance ...........................................................................13

Limited lifetime consumer warranty ....................................................................14

Using Your System

Commands At a Glance

System State Press/Release Press/Hold for 3 sec.

ENGINE OFF START ENGINE CAR FINDER

ENGINE ON UNLOCK DOORS STOP ENGINE

Start Engine

When the engine is OFF, press and release the remote control button

to start the engine.

See"Using Remote Start" on page 5 for more feature details.

Unlock Doors

When the engine is ON, press and release the remote control but-

ton. The doors unlock, the parking lights ﬂash, the horn sounds (if con-

nected) as conﬁrmation.

Note: Horn honk may be an optional feature that requires additional

parts and labor.

Stop Engine

When the engine is ON, press and hold the remote control button for

3 seconds. The engine stops running and the parking lights turn off.

Car Finder

When the engine is OFF, press and hold the remote control button for

three seconds. The horn sounds once and the parking lights ﬂash ten

times.

Using Remote Start

Important! (1) Never remotely start the vehicle with the ve-

hicle in gear, and (2) Never remotely start the vehicle with

the key in the ignition.

Starting the Engine:

1. Press and release the remote control button.

2. The engine will START and the parking lights will turn on. The

transmit LED ﬂashes once.

3. The parking lights stay on as visual conﬁrmation while the engine

is ON. The default runtime is 12 minutes and can be shortened or

extended by the installer.

If you wish to warm or cool the vehicle interior set the climate controls

to the desired temperature prior to starting.

Key Takeover

When you are ready to drive the vehicle:

1. Unlock the doors

2. Enter the vehicle. Do not step on the foot brake

3. Insert the key, turn it to the run (not start) position. Step on the foot

brake. The remote start is disabled and the parking lights turn off.

4. Begin driving.

Note If your vehicle uses a Smart Key or PTS (Push-To-Start) sys-

tem, please refer to the vehicle speciﬁc instructions included

with the owner's guide of the interface module or consult

your authorized dealer.

Safety Features

The following safety features will disable the remote start when acti-

vated or not allow the engine to start if not properly set before starting.

• Foot Brake is depressed

• Hood is open

• Shut down toggle switch is OFF

• Engine over-rev protection (Tachometer mode only)

Pit Stop

This remote start can keep the engine running during short trips away

from the vehicle.

Enabling Pit Stop mode:

1. Park in a well ventilated area.

2. With the engine running set the transmission in the park position.

3. Press and release the remote control button, the parking lights turn

to conﬁrm.

4. Turn off the ignition and remove the key, the engine continues

running.

5. Exit the vehicle, the engine runs for the programmed runtime.

Note If your vehicle uses a Smart Key or PTS (Push-To-Start) sys-

tem, please refer to the vehicle speciﬁc instructions included

with the owner's guide of the interface module or consult

your authorized dealer.

Optional Rear Defogger

If connected, the Defogger circuit automatically activates after remote

starting the vehicle.

Optional Starter Anti-Grind Circuitry

This system includes an anti-grind circuit that can prevent damage to

the starter motor if the key is turned to the start position while the engine

is ON.

Note: Anti-grind circuitry only works when the remote start system is

operating the motor.

Disabling the Remote Start System

When the Shutdown Switch is set to the OFF position, remote engine

starting is defeated. DO this when the vehicle is being serviced or

driven by someone unfamiliar with remote start system operations.

Location Of Shutdown Switch: _________________________

Rapid Resume Logic

This Directed system stores its current state to non-volatile memory. If

power is lost and then reconnected the system recalls the stored state

from memory.

Remote Programming

1. Turn key to the ON position

2. Within 10 seconds, press and release Valet button one time.

3. Within 10 seconds, press and hold the Valet button. The LED on the mod-

ule ﬂashes one time and the horn honks (if connected) to conﬁrm entry into

remote programming. Do not release the valet button.

4. Press the button on the remote control. The horn honks to conﬁrm the remote

has been programmed.

5. Release the Valet button.

6. Turn the key to the Off position. The horn sounds one long honk to conﬁrm

that remote programming has been exited.

The programming routine exits if any of the following occurs:

• The ignition is turned off

• There is no activity for 30 seconds

• The Valet button is pressed too many times

Programming Options

Programming options control your system's normal operational set-up.

Most options do not require additional parts, but some may require

installation labor.

The following is a list of the programmable options, with the factory

settings in bold.

• Your system can be programmed to allow the vehicle to run for

up to 60 minutes when remote started. Can be set up to minute

increments by your installer.

• Parking lights ﬂashing or constant. Your system can be pro-

grammed to ﬂash or turn on the parking lights constantly during the

entire remote start operation.

• Ignition switch controlled door locking on or OFF. With this feature

on, the doors will lock 3 seconds after the ignition key is turned on,

and unlock when the key is turned off.

Important: The door lock option must be installed for this feature to

work.

Patent Information

This product is covered by one or more of the following United States

patents:

Remote Start Patents:

5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936;

5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053;

7,483,783

Vehicle Security Patents:

5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591;

5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667;

5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484

Other patents pending.

Inhaltsverzeichnis

Andere Viper Autoalarmanlage Handbücher

Viper

Viper SmartStart 5000 Series Bedienungsanleitung

Viper

Viper 446 Series Bedienungsanleitung

Viper

Viper 550 ESP Bedienungsanleitung

Viper

Viper 310V Bedienungsanleitung

Viper

Viper 130XV Bedienungsanleitung

Viper

Viper 480XV Bedienungsanleitung

Viper

Viper 4806V Bedienungsanleitung

Viper

Viper 5901 Bedienungsanleitung

Viper

Viper 791 XV Bedienungsanleitung

Viper

Viper G5102V Bedienungsanleitung

Viper

Viper Responder 350 Bedienungsanleitung

Viper

Viper SmartStart VSM50BTP1 Bedienungsanleitung

Viper

Viper 320HV Bedienungsanleitung

Viper

Viper 790XV Bedienungsanleitung

Viper

Viper Model 3002 Bedienungsanleitung

Viper

Viper 211HV Bedienungsanleitung

Viper

Viper Directed 4706V Bedienungsanleitung

Viper

Viper 790XV Bedienungsanleitung

Viper

Viper 791 XV Bedienungsanleitung

Viper

Viper SmartStart 3000 Series Bedienungsanleitung

Viper

Viper SmartStart 3000 Series Bedienungsanleitung

Viper

Viper 3102V Bedienungsanleitung

Viper

Viper 500+ Bedienungsanleitung

Viper

Viper 460XV Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Clifford

Clifford 3606X Bedienungsanleitung

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

Clifford

Clifford Sabre II Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Ultra Start

Ultra Start 450 SERIES Bedienungsanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Excalibur

Excalibur AL-1860-EDPB Bedienungsanleitung

Clifford

Clifford CYBER 2 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Clifford

Clifford Nova 3 Bedienungsanleitung