Vivo STAND-MIC01 Bedienungsanleitung

Pneumatic Arm Microphone Desk Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-mic01

SKU: STAND-MIC01

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

WARNING!

A (x1)

Arm

B(x1)

Clamp

C(x1)

Decorative

Cover

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

D(x1)

Mic Clamp

E(x1)

Pole

F (x1)

Cable Clip

G (x3)

Bolt

H (x1)

Grommet Plate

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

I(x1)

Grommet Base

J(x1)

3mm Allen

Wrench

K (x1)

4mm Allen

Wrench

L (x1)

6mm Allen

Wrench

ASSEMBLY STEPS

STEP 1

TOOLS NEEDED

5.95lbs

(2.70kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

Phillips

Screwdriver

OPTION A: Clamp Installation

As delivered, the clamp (B) will fit a desktop thickness of 35-80mm. To fit a desk thickness of 10-45mm,

remove the two bolts using the 6mm Allen wrench (L), then reassemble at alternate height. Attach

decorative cover (C) to clamp (B). Attach pole (E) to clamp (B) with bolts (G) using 4mm allen wrench

(K).

35-80mm

10-45mm

STEP 1 (Continued)

STEP 2

Slide on cable management clip (F). Slide arm (A) onto pole (E) and tighten at desired height using

6mm allen wrench (L).

OPTION B: Grommet Base Installation

Disassemble clamp (B) using 6mm Allen wrench (L). Remove the screw, washer and clamp plate from

the clamp, then remove the hand bolt. If desk does not have an existing grommet hole, drill a 3/8”

(10mm) hole through the desktop. Place grommet plate (H) onto the hand bolt, then secure the pole

(E) and grommet base (I) to the desktop using the hand bolt and grommet plate. Slide on decorative

cover (C).

0-40mm

NOTE: Pin in grommet base (I)

inserts into small hole underneath

pole (E).

STEP 3

Screw mic clamp (D) onto arm (A) and adjust using 3mm Allen wrench (J).

STEP 4

Place mic into mic clamp (D). Manage cable as shown using covers on arm (A) and cable clip (F).

STEP 5

Adjust gas spring tension if needed by turning screw on top of center joint with 6mm Allen wrench (L).

Adjust as Desired

+90 °

-90°

±135 °

±90 °

±180 °

LAST UPDATED: 03/06/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Inhaltsverzeichnis

Andere Vivo Rack & Stand Handbücher

Vivo

Vivo STAND-TV70B Bedienungsanleitung

Vivo

Vivo DESK-V000ME Bedienungsanleitung

Vivo

Vivo MOUNT-CAR01 Bedienungsanleitung

Vivo

Vivo STAND-V002 Bedienungsanleitung

Vivo

Vivo MOUNT-KB03N Bedienungsanleitung

Vivo

Vivo STAND-HS04H Bedienungsanleitung

Vivo

Vivo PP-RD-102B Bedienungsanleitung

Vivo

Vivo MOUNT-SF05H Bedienungsanleitung

Vivo

Vivo MOUNT-RAIL02 Bedienungsanleitung

Vivo

Vivo STAND-MIC02 Bedienungsanleitung

Vivo

Vivo Easel Studio STAND-TV70C Bedienungsanleitung

Vivo

Vivo DESK-V133E Bedienungsanleitung

Vivo

Vivo STAND-V004P Bedienungsanleitung

Vivo

Vivo STAND-V000D Bedienungsanleitung

Vivo

Vivo STAND-TV01T Bedienungsanleitung

Vivo

Vivo MOUNT-KB03D Bedienungsanleitung

Vivo

Vivo MOUNT-PLAY3B Bedienungsanleitung

Vivo

Vivo STAND-V001FGL Bedienungsanleitung

Vivo

Vivo STAND-V002FG/W Bedienungsanleitung

Vivo

Vivo MOUNT-PB1 Bedienungsanleitung

Vivo

Vivo STAND-V001HG Bedienungsanleitung

Vivo

Vivo STAND-SHELF60B Bedienungsanleitung

Vivo

Vivo MOUNT-SF01M Bedienungsanleitung

Vivo

Vivo PP-DK30B-2 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung