Vivo STAND-V100D Bedienungsanleitung

Pneumatic Arm Single Ultrawide Monitor

Desk Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v100d

SKU: STAND-V100D/DW

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3

ASSEMBLY STEPS

STEP 1

Loosen bolts on back of Clamp (G) using 4mm Allen Wrench (T-A), leaving 6mm of thread exposed. For

a desk thickness of 3/8” to 2” (10 - 50mm), hang assembled clamp into top 4 slots of Clamp Brace (F),

or for a desk thickness of 1.5” to 3” (40 - 80mm), into lower 4 slots. Tighten using 4mm Allen Wrench

(T-A). Secure to the desktop using 6mm Allen Wrench (T-B).

OPTION A: Clamp Installation

Attach Clamp Brace (F) to Base (A) using M6x12mm Screws (S-B) and tighten with 4mm Allen

Wrench (T-A). Thread M10x63mm Screws (S-D) into Clamp (G) and place Clamp Plate (E) on top.

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

PACKAGE CONTENTS

A (x1)

Base

B(x1)

Lower Arm

C(x1)

Spring Arm

T-A (x1)

4mm Allen Wrench

T-B (x1)

6mm Allen Wrench

G (x1)

Clamp

S-B (x4)

M6x12mm Screw

M-A (x4)

M4x12mm Screw

D(x1)

VESA Adapter

E(x1)

Clamp Plate

F (x1)

Clamp Brace

M-B (x4)

M5x12mm Screw

M-C (x4)

M5 Washer

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

TOOLS NEEDED

Phillips

Screwdriver

4.4-44 lbs

(2-20 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

S-A (x1)

M8 Nut

S-C (x1)

M8x35mm Screw

S-D (x2)

M10x63mm Screw

S-B

T-A

S-D

T-A

T-B

T-A

4 5

STEP 1 (Continued) STEP 4

Install the VESA Plate (D2) to monitor using M4x12mm Screws (M-A) or M5x12mm Screws (M-B)

with M5 Washers (M-C), making sure the arrow in back is pointing up.

STEP 2

STEP 3

To limit Lower Arm (B) rotation to 90°, adjust the set screw located inside of the opening in the bottom

of Lower Arm (B). Back the screw o 5-6 turns, which is approximately 5mm (3/16”) using 4mm Allen

Wrench (T-A). For full roatation, fully tighten the set screw. Place Lower Arm (B) on top of Base (A), and

secure by turning the lower set screw in back with 4mm Allen Wrench (T-A).

Place Spring Arm (C) on top of Lower Arm (B), and secure by turning the set screw in back with 4mm

Allen Wrench (T-A).

STEP 5

STEP 6

Hang VESA Plate (D2) on VESA Adapter (D) and secure using Thumbscrew (D1).

Mark drill holes using the larger outer holes on Clamp Plate (E), drill two 3/8” (10mm) holes. Insert

M10x63mm Screws (S-D) with Clamp Plate (E) up through the underside of the desk and tighten to

Base (A) using the 6mm Allen Wrench (T-B).

OPTION B: Grommet Base Installation

BOTTOMBOTTOM

T-A

Attach VESA Adapter (D) using M8x35mm Screws (S-C) and M8 Nuts (S-A) on Spring Arm (C) using 6mm

Allen Wrench (T-B). Unscrew Thumbscrew (D1) on VESA Adapter (D) and remove VESA Plate (D2).

S-C

S-A

T-B

D2 D

S-D

T-B

6 7

STEP 7

For safety, please do not extend the monitor behind the desk. This may cause instability and tip the

desk over.

Adjust as Desired

STEP 8

Remove cable cover on Spring Arm (C) by pulling the sides away from the arm to unclip them. Slide

cable cover on Lower Arm (B) forward to remove it. Manage cables in cable covers and re-install.

If needed, adjust Spring Arms (C) to support the monitors using the 6mm Allen wrench (T-B). Turn the

screw in back counter-clockwise to decrease support, and clockwise to increase.

T-B

Adjust tilt and swivel using 6mm Allen Wrench (T-B).

T-B

LAST UPDATED: 08/08/23

REV2

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vivo Rack & Stand Handbücher

Vivo

Vivo STAND-V000D Bedienungsanleitung

Vivo

Vivo STAND-V001H Bedienungsanleitung

Vivo

Vivo STAND-V101G2 Bedienungsanleitung

Vivo

Vivo STAND-V003T Bedienungsanleitung

Vivo

Vivo Sonos Play 5 Bedienungsanleitung

Vivo

Vivo STAND-V101G2 Bedienungsanleitung

Vivo

Vivo STAND-V101G1 Bedienungsanleitung

Vivo

Vivo MOUNT-MINI1 Bedienungsanleitung

Vivo

Vivo STAND-V102G2U Bedienungsanleitung

Vivo

Vivo STAND-TV00Y Bedienungsanleitung

Vivo

Vivo STAND-V101H Bedienungsanleitung

Vivo

Vivo STAND-V012M Bedienungsanleitung

Vivo

Vivo STAND-SIT1KW Bedienungsanleitung

Vivo

Vivo STAND-V102F Bedienungsanleitung

Vivo

Vivo STAND-V001CW Bedienungsanleitung

Vivo

Vivo STAND-V000D5 Bedienungsanleitung

Vivo

Vivo STAND-TV70AB Bedienungsanleitung

Vivo

Vivo MOUNT-VP02W Bedienungsanleitung

Vivo

Vivo STAND-TV00L Bedienungsanleitung

Vivo

Vivo MOUNT-KB04C Bedienungsanleitung

Vivo

Vivo STAND-V000U Bedienungsanleitung

Vivo

Vivo STAND-V102BDU Bedienungsanleitung

Vivo

Vivo STAND-V001E Bedienungsanleitung

Vivo

Vivo STAND-SHELF46B Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung