Vortex FURY HD 5000 AB Bedienungsanleitung
®
EQUIPPED WITH
APPLIED
BALLISTICS®
PRODUCT MANUAL
FURY®
HD 5000 AB
LASER RANGEFINDING BINOCULAR
2
Ocular Lens
Center Focus
Twist-up Eyecup
Strap
Attachment
Diopter Focus
Measure Button
Menu Button
Right Hand
Wind Direction
Left Hand
Wind Direction
Wind Bearing
Capture Button
Objective Lens
Reticle Focus
Tripod Adapter Socket
Bluetooth
®
Antenna
Images are for representation only. Product may vary slightly from what is shown.
2 3
FURY®HD 5000 AB
FURY®HD 5000 AB
LASER RANGEFINDING BINOCULAR
The Fury®HD 5000 AB is an extremely effective angle-compensated
laser rangefinding binocular intended for hunters, archers, and
shooters. The primary HCD (Horizontal Component Distance) mode
provides key angle compensated range information the vast majority
of rifle and bow shooters require in a simple, quick-to-read display.
The Fury®HD 5000 AB also has a BAL (Ballistics) mode and Scan
feature, along with adjustments for reading in yards or meters, and
setting the display brightness.
The Fury®HD 5000 AB comes equipped with on-board compass,
humidity, barometric pressure, and temperature sensors.
4
BASIC OPERATION
Adjust the Eyecups
The eyecups on a Fury®HD 5000
AB twist up and down so any
viewer can see the full field and
enjoy comfortable viewing—with
or without eyeglasses.
When not using eyeglasses or sunglasses, keep the eyecups fully
extended. For best viewing when wearing eyeglasses, twist
eyecups down.
Adjust the Interpupillary Distance
The interpupillary distance (IPD) is the distance between the
centers of the left and right eye pupils. Match the binocular’s IPD
to that of your eyes so you see a single image free of shading.
Rotate the binocular barrels inward or outward to line your eyes
up with ocular lenses.
Install Battery
Open the battery compartment and
install the CR2 battery included with
the Fury® HD 5000 AB.
+
–
Install battery with
positive side facing in.
4 5
FURY®HD 5000 AB
Power Up
To power up the Fury®HD 5000 AB, and prepare for ranging,
press and release the “Measure” button. The HCD or BAL ranging
screen will display. The unit will power down automatically after 15
seconds of non-use. The auto shutoff feature can be adjusted to 30,
60, or 180 seconds. See the “Sleep Time” section on page 9.
Low Battery Icon
The low battery icon comes on at 25%
and stays on until there is no power or
the battery is replaced.
Properly Focus the Binocular
For the best views, follow this process
to properly set the display, center focus,
and diopter. Choose an object that is
about 20 yards away from you and
stay in the same spot until you have
adjusted the binocular for your eyes.
1. Begin by pressing the “Measure”
button once to turn on the display.
Close your left eye or cover the left
objective lens with your hand, and
use the reticle focus ring to bring
the digital display into focus.
2. With your left eye still closed, or
the left objective lens still covered,
adjust the center focus ring to bring
the scene into focus.
LOW BATTERY
Adjust Diopter Setting
6
3. Next, close your right eye or cover the right objective lens with
your hand. Adjust the diopter focus ring until the scene is in
focus. From this point on, you will only need to use the center
focus wheel.
NOTE: It can be beneficial to put a
small mark on the binocular housing
in line with the diopter reference
line. Use this as a quick reference
to ensure the diopter ring is not
accidentally adjusted.
Mode Selection
Your Fury® HD 5000 AB is factory set to the angle compensating
HCD ranging mode, best target mode, yards, and maximum
brightness. For most users, these are the preferred settings.
To change modes: Press and
release the “Measure” button
to power on and then press
and hold the “Menu” button
for at least two seconds. Once
the Mode Selection screen
displays, release the button.
As you progress through Mode
Selection, you may exit at any
time and save your settings
by pressing and holding the
“Menu” button for at least four
seconds—the unit will return to
power-up condition.
Measure Button
Menu Button
6 7
FURY®HD 5000 AB
SET AND SAVE MODE SELECTIONS
Ranging Mode Selection
Choose Between the HCD and BAL Modes.
After activating the Mode Selection, press the “Measure” button
to toggle between the HCD and BAL displays. Press the “Menu”
button to save your desired choice and continue through the
other options.
Range Selection
Choose Between Yards and Meters Display.
Press the “Measure” button to toggle between the Yards and Meters
display. Press the “Menu” button to save your desired choice and
move to the Brightness selection screen.
8
Brightness Selection
Choose Between Five Brightness Settings.
The Fury® HD 5000 AB provides five
illumination settings, plus an automatic
brightness setting. The automatic brightness
setting will automatically adjust the display
brightness to suit the ambient brightness.
Press the “Measure” button to toggle through
the Brightness settings. Press the “Menu”
button to save your desired setting and move
to the target mode selection.
Target Mode Selection
Target Mode Explanations
The Fury®HD 5000 AB provides two target modes: Best Mode and
Last Mode.
Best Mode
Your Fury®HD 5000 AB comes preset to Best target mode. This
is the standard mode providing the target’s range with the strongest
range result. Best Mode is the recommended target mode for
most situations.
Last Mode
Looks for the farthest distance when panning and scanning. This
mode is ideal for ranging a specific target behind a group of objects
like brush, trees, rocks, etc.
8 9
FURY®HD 5000 AB
Setting Target Modes
Press the “Measure” button to toggle between the Best and Last
displays. Press the “Menu” button to save your desired choice and
move back to the HCD/BAL selection screen.
To exit Mode Selection and save settings, press and hold the
“Menu” button for four seconds. Settings will also save when the
unit powers down automatically.
Sleep Time
There are four options to program the
Fury®HD 5000 AB display to auto-shut off.
15 seconds, 30 seconds, 60 seconds, or
180 seconds. Navigate to the Time display
in the menu, and press the “Measure”
button to select the auto-shut off time.
10
Bluetooth®Selection ONLY AVAILABLE IN BAL MODE
The Fury®HD 5000 AB is equipped with
a Bluetooth®chip to allow the unit to
wirelessly pair with Kestrel®wind meters
and Garmin®Foretrex®GPS devices.
Navigate to the BT display in the menu
and press the “Measure” button to turn
Bluetooth®on/off.
Profile Selection ONLY AVAILABLE IN BAL MODE
This mode option is only active when in
BAL mode. Select the ballistic profile for
the wind/drop solution to be displayed when
in BAL mode. See the Ballistics Manual for
Ballistic Profiles information, and how to
set up and select ballistic profiles.
Temperature Selection ONLY AVAILABLE IN BAL MODE
This mode option is only active when in BAL mode. The temperature
can be displayed in Celsius (C) or Fahrenheit (F). Navigate to the
Temperature display in the menu and press the “Measure” button to
select “C” or “F.”
Temp C Temp F
Andere Handbücher für FURY HD 5000 AB
1
Inhaltsverzeichnis
Andere Vortex Fernglas Handbücher
Vortex
Vortex VANQUISH VNQ-1026 Bedienungsanleitung
Vortex
Vortex FURY Bedienungsanleitung
Vortex
Vortex Viper Series Bedienungsanleitung
Vortex
Vortex Viper HD R/T Bedienungsanleitung
Vortex
Vortex Vulture HD Bedienungsanleitung
Vortex
Vortex FURY HD 5000 Bedienungsanleitung
Vortex
Vortex TRIUMPH HD Bedienungsanleitung
Vortex
Vortex Kaibab HD Bedienungsanleitung
Vortex
Vortex Raptor 6.5x32 Bedienungsanleitung
Vortex
Vortex CROSSFIRE Bedienungsanleitung
Vortex
Vortex DiamondBack Bedienungsanleitung
Vortex
Vortex DB-205 Bedienungsanleitung
Vortex
Vortex Vulture 10x56 Bedienungsanleitung
Vortex
Vortex Viper 8x28 R/T Bedienungsanleitung
Vortex
Vortex FURY HD 5000 Bedienungsanleitung
Vortex
Vortex BIN-DBK-12A Montageanleitung
Vortex
Vortex Diamondback HD Bedienungsanleitung
Vortex
Vortex Vanquish Bedienungsanleitung
Vortex
Vortex Vanquish Bedienungsanleitung
Vortex
Vortex Viper Bedienungsanleitung
