Voscom VOS-8040FDT Series Bedienungsanleitung

VOS-8040FDT/R series

8-Channel Video + 4 Duplex Data

Installation Manual

Fiber Optic Transmission Systems

VOSCOM TECHNOLOGIES CO.,LIMITED

WWW.VOSCOM.COM

Important Safety Instructions EN_1

1. Readthese instructions. Keep these instructions. Heed allwarnings. Follow all instructions.

5. Donot use this apparatus near water. Cleanonly with dry cloth.

7. Donot block any ventilation openings. Install in accordance with the manufacturers

instructions.

8. Donot install near any heat sources such as radiators, heatregisters, stoves,or other

apparatus (includingamplifiers) that produce heat.

9. Donot defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has twoblades withone wider than the other. Agrounding type plug has two blades and a third

grounding prong. The wideblade or the third prong are provided for your safety. Ifthe provided

plug doesnot fitinto your outlet consult an electrician for replacement of the obsolete outlet.

10. Protectthe power cord from being walked on or pinched particularly at plugs,convenience

receptacles, andthe points where they exit from the apparatus.

13. Referall servicingto qualifiedservice personnel. Servicing is required when the apparatus

has beendamaged in any way, suchas power-supply cord or plug is damaged, liquid has been

spilled or objects havefallen into the apparatus,the apparatushas been exposed to rain or

moisture, doesnot operatenormally,or has been dropped.

14. Apparatusshall not be exposed to dripping or splashing and that no objects filled with liquids,

such asvases shall be placed on the apparatus.

15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatusto rain or

moisture.

16. Installation should be done only by qualified personnel and conform to all local codes.

20. CAUTION: These servicing instructions arefor useby qualified service personnel only.To

reduce therisk of electric shock do not perform any servicing other than that contained in the

operating instructionsunless youare qualifiedto do so.

Website:www.voscom.com

Product Overview En_2

Video

The VOS-8040FDT/R can transmission8-Channel

video, 4duplex data and data support RS485,RS232

,RS422, no audio.singlemode ormultimode optical

cable. Stand-aloneor rack-mount. The cards can be

inserted into our 14 slots,19inch 4U or 6U rack-mountable

card cage (VOS-CH04 or VOS-CH06). One 8-Channel video card require two slots widths.

System Diagram:

Model Number

Transmitter Receiver Fiber Mode Wavelengths Optical

Power

Budget

Maximum

Transmission

Distance

Multi-Mode 1310nm/1550nmVOS-8040FDMRVOS-8040FDMT

•The OpticalPower Budgetdata fitMulit-mode(62.5/125 m),Single-Mode(9/125 m).

•When using50/125 m multimode fiber, subtract3 dBfrom the optical power budget.

•Optical transmissiondistance is limited to optical loss of thefiber and any additional loss introduced by connectors,

splices andpatch panels.

•Maximum transmissiondistance is also limited by fiber bandwidth.

•Power adapteris manufactured by thirdparty and is supplied with fitted screw-terminal outputcables.Power

adapter included(for standalone) US, European, UK or Australian powerplug.

•Please feelfree to consult factory for anyspecial requirement and customization

Note:

12dB 1.2km

Single-Mode

VOS-8040FDSRVOS-8040FDST 12dB 20km

Models and Optical Power Budget:

•Uncompressed Digital Composite Video over onefiber

•Compatible with all PAL,NTSC,SECAM Video Systems

•Multi-mode Fiber Support for Distances up to 1.2 km

•Single-Mode Fiber Support for Distances up to 100 km

•No EMI or RFI and noground loops

•Stand alone or rack-mount

Features:

Data

1310nm/1550nm

Ethernet

8 xPTZ Camera

1 Fiber opticCable Monitor

VOS-8040FDT

Transmitter VOS-8040FDR

Receiver

8 x Video 8 x Video

Keyboad

1 x Duplex Data

3 x Duplex Data 3 x Duplex Data

Fiber OpticConnector, FC/PC or ST/PC

V1~V8 BNCConnector, 75-ohmanalog video input (Transmitter)/output (Receiver)

Stand-alone Power supply Connector, DC5V3A Input.

Panel & Cable Connection En_3

NOTE1: Digital video optic transmitterand receivershould be used in pairs, one is Transmitter

(LED is red), theother is Receiver (LED is green).

NOTE2: Avoid simultaneously connecting video signals to both the front BNC andrear BNC of the

same channel.Also, since each video channel is factory terminated to 75 ohm, unused BNCs

should notbe used for loop-through video connections.

4Data Connector, Terminal Block,Data support 4 duplex Rs485 or Rs232.

5No Function,No IP Ethernet support for this model.

FRONT PANEL

FTX

REAR PANEL

DC5V

V1 V2 V3 V4 V5 V6 V7 V8

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

EXT1 EXT2 EXT3 IP/EXT

4None

Panel & Cable Connection En_4

Receiver (Rs485): 4-channel duplexRs485 DataConnection (Input/Output)

Note: If you need the Rs422 or RS485(4-wire) data connection,

please contact us, [email protected].

Transmitter (Rs485):4-channel Duplex Rs485 Data Connection (Input/Output)

Conect 1-ChannelRs485+ (A)

Conect 1-ChannelRs485- (B)

Input/Output

NOTE1:Digital video optic transmitterand receiver should be used in pairs, one is transmitter

(LED is red), the other is receiver (LEDis green).

NOTE2: Avoid simultaneously connecting video signals to both the front BNC andrear BNC of the

same channel.Also,since each video channel is factory terminated to 75 ohm, unused BNCs

should notbe used for loop-through video connections.

8 Pin Terminal Block

Input/Output

1 2 3 4 5 6 7 8

EXT3

Conect 2-Channel Rs485+ (A)

Conect 2-Channel Rs485- (B)

Input/Output

Conect 3-Channel Rs485+ (A)

Conect 3-Channel Rs485- (B)

Input/Output

Conect 4-Channel Rs485+ (A)

Conect 4-Channel Rs485- (B)

Input/Output

Conect 1-Channel Rs485+ (A)

Conect 1-Channel Rs485- (B)

Input/Output

8 Pin Terminal Block

Input/Output

1 2 3 4 5 6 7 8

EXT3

Conect 2-Channel Rs485+ (A)

Conect 2-Channel Rs485- (B)

Input/Output

Conect 3-Channel Rs485+ (A)

Conect 3-Channel Rs485- (B)

Input/Output

Conect 4-Channel Rs485+ (A)

Conect 4-Channel Rs485- (B)

Input/Output

Panel & Cable Connection En_5

Transmitter EXT1: 1-Ch ~2-Ch Duplex Rs232 Data Connection (Input/Output)

Transmitter EXT2:3-Ch ~ 4-Ch duplex Rs232 Data Connection (Input/Output)

Note: If you need the Rs422 or RS485(4-wire) data connection,

please contact us, [email protected].

NOTE1:Digital video optic transmitterand receiver should be used in pairs, one is transmitter

(LED is red), the other is receiver (LEDis green).

NOTE2: Avoid simultaneously connecting video signals to both the front BNC andrear BNC of the

same channel.Also,since each video channel is factory terminated to 75 ohm, unused BNCs

should notbe used for loop-through video connections.

None

Input/Output

8 Pin Terminal Block

Conect Ground (2-Ch GND)

Conect Data2-Ch Rs232 TXD

Conect Data2-Ch Rs232 RXD

Input/Output

1 2 3 4 5 6 7 8

EXT1

Input/Output Conect Data1-Ch Rs232 TXD

Conect Data1-Ch Rs232 RXD

Conect Ground(1-Ch GND)

None

8 Pin Terminal Block

1 2 3 4 5 6 7 8

EXT2

Transmitter (Rs232): 4-Ch Duplex Rs232 Data Connection (Input/Output)

Input/Output

Conect Ground (4-Ch GND)

Conect Data4-Ch Rs232 TXD

Conect Data4-Ch Rs232 RXD

Input/Output

Input/Output Conect Data3-Ch Rs232 TXD

Conect Data3-Ch Rs232 RXD

Conect Ground(3-Ch GND)

Input/Output

Panel & Cable Connection En_6

Receiver EXT1: 1-Ch ~2-Ch Duplex Rs232 Data Connection (Input/Output)

Receiver EXT2:3-Ch ~ 4-Ch duplex Rs232 Data Connection (Input/Output)

Note: If you need the Rs422 or RS485(4-wire) data connection,

please contact us, [email protected].

NOTE1:Digital video optic transmitterand receiver should be used in pairs, one is transmitter

(LED is red), the other is receiver (LEDis green).

NOTE2: Avoid simultaneously connecting video signals to both the front BNC andrear BNC of the

same channel.Also,since each video channel is factory terminated to 75 ohm, unused BNCs

should notbe used for loop-through video connections.

None

Input/Output

8 Pin Terminal Block

Conect Ground (2-Ch GND)

Conect Data2-Ch Rs232 TXD

Conect Data2-Ch Rs232 RXD

Input/Output

1 2 3 4 5 6 7 8

EXT1

Input/Output Conect Data1-Ch Rs232 TXD

Conect Data1-Ch Rs232 RXD

Conect Ground(1-Ch GND)

None

8 Pin Terminal Block

1 2 3 4 5 6 7 8

EXT2

Receiver (Rs232): 4-Ch Duplex Rs232 Data Connection (Input/Output)

Input/Output

Conect Ground (4-Ch GND)

Conect Data4-Ch Rs232 TXD

Conect Data4-Ch Rs232 RXD

Input/Output

Input/Output Conect Data3-Ch Rs232 TXD

Conect Data3-Ch Rs232 RXD

Conect Ground(3-Ch GND)

Input/Output

Stand-alone Installation En_7

The VOS-8040FDTtransmitter/VOS-8040FDR receiver can be mounted into a rack orcan be

used asa stand-alone module. As a stand-alonemodule, the unit can be placed on a desktop or

can bemounted to a wall.

Stand-alone Mounting Size: 176.5mm x 158mm x 59mm

NOTE: Before mounting the VOS-8040FDTtransmitter/VOS-8040FDR receiver, please

ensure that there is adequate space at both ends forviewing the front-panel LEDsand for making

the variousrear-panel cableconnections.

Website:www.voscom.com

Rack-mount Installation En_8

Installation Instructions

Typical Configurations:

1:Install the video card into a standard 19inch rack, usinguser-supplied rack-mounting

hardware. Becareful to not damage exposed objects on the back of the card cage unit.

2:If asecondary earth ground connectionis needed, a grounded wire with a ground lug can be

attached to the rackusing the protruding screw provided on the right side of the chassis.

3:If desired, blank panels may beinstalled to cover unused slots. A single blank panel coversa

single slot opening.

4:Each fiber optic plug-in module is equipped with a POWER LED indicator that illuminates

when power is applied to the rack unit.

5:Fiber optic plug-in modules(video cards) can be installed into anyof theavailable 14slots

of thecard cage. Most modules require onlya single slot width, but others, such as the 8-Ch

video Series, require two slot widths.

VOS-CH04:

19 inch4U,14 video card slots, suit for 1-ch,2-ch,4-ch,8-ch(two slots)video cards.

Support one slide-in power supply AC100V~AC240V

VOS-CH06:

19 inch6U,16 video card slots, suit for 1-ch,2-ch,4-ch,8-ch(two slots)video cards.

Support two slide-in power supply AC100V~AC240V, one for redundancy.

Website:www.voscom.com

The VOS-8040FDTtransmitter/VOS-8040FDR receivercan beinstalled into our rack mount

chassis, VOS-CH04or VOS-CH06, which can be mounted into an industry-standard 19-inch

equipment rack.

Troubleshooting En_9

Indicator Status Meaning Possible Cause Corrective Action

Power LED

Light Power isbeing applied

to the module. --- No actionrequired.

Not Light Power isnot being

applied to the module.

Check powerconnection.

If moduleis rackmounted,

reseat moduleor power

supply asnecessary.

Power connectionis

faulty.

Power supplyhas failed. Replace powersupply.

Loss ofpower occurs due

to trippedcircuit

breaker(s), blownfuse(s),

or faultyelectrical

service.

Check circuit breaker(s),

fuse(s), orelectrical

service asnecessary.

LED indicators on thefront-panel of the transmitter/receiverallow youto monitor signal status,

laser status,data activity, contact closure activation, and operatingpower. Table A~D provide

information aboutthe front-panelindicators and associated troubleshooting guidelines.

Table A: Power Links

Indicator Status Meaning Possible Cause Corrective Action

Video LED(VIDEO 1,VIDEO 2....)

Light Incoming video signal

is present on thechannel. --- No actionrequired.

Not Light

on Transmitter Incoming video signal

is not present on the

channel.

Check power connection

to the video source.

Video source is not

powered on.

Video source is not

connected to the

transmitter.

Check BNC connections.

Coaxial cable is

defective. Replace cable.

Table B: Video Links

Not Light

on Receiver Incoming video signal

is not present on the

channel.

Optical signal is not

being receivedfrom the

transmitter. Optic Fault

LED is also not light.

Refer tothe Optic Fault

LED section in this table.

Video source is not

powered on. Check power connection

to the video source.

Video source is not

connected to the

transmitter.

Check BNC connections.

Coaxial cable connected

to the transmitter is

defective.

Replace cable.

Website:www.voscom.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Voscom Empfänger Handbücher

Voscom

Voscom VOS-2010FDT Series Bedienungsanleitung

Voscom

Voscom VOS-1110FFDT Series Bedienungsanleitung

Voscom

Voscom VOS-1FOM-SCCT Series Bedienungsanleitung

Voscom

Voscom VOS-8810FFDT Series Bedienungsanleitung

Voscom

Voscom VOS-2410FFDT Series Bedienungsanleitung

Voscom

Voscom VOS-2H3G-ADCEMT Bedienungsanleitung

Voscom

Voscom VOS-4400FFSeries Bedienungsanleitung

Voscom

Voscom VOS-0400DT Series Bedienungsanleitung

Voscom

Voscom VOS-1DHD-ADMT Bedienungsanleitung

Voscom

Voscom VOS-8FOM-D485T Series Bedienungsanleitung

Voscom

Voscom VOS-2FOM-D485T Series Bedienungsanleitung

Voscom

Voscom VOS-8FOM-D232T Series Bedienungsanleitung

Voscom

Voscom VOS-1DH3G-ADCEMT Bedienungsanleitung

Voscom

Voscom VOS-0200FT Series Bedienungsanleitung

Voscom

Voscom VOS-2200FFT Series Bedienungsanleitung

Voscom

Voscom VOS-1HD-ADST Bedienungsanleitung

Voscom

Voscom VOS-1HD-ADCET/R Series Bedienungsanleitung

Voscom

Voscom VOS-4000FT Series Bedienungsanleitung

Voscom

Voscom VOS-2400FFT Series Bedienungsanleitung

Voscom

Voscom VOS-2FOM-DCCT Series Bedienungsanleitung

Voscom

Voscom VOS-4800FFT Series Bedienungsanleitung

Voscom

Voscom VOS-0200DT Series Bedienungsanleitung

Voscom

Voscom VOS-4FOM-D232T Series Bedienungsanleitung

Voscom

Voscom VOS-2200FDT Series Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung