Wacker Neuson BS 30 Bedienungsanleitung

Operator´s Manual

VIBRATION RAMMER

BS 30

08.2011

0200056en / 003

Manufacturer

Wacker Neuson Produktion GmbH & Co. KG

Preußenstraße 41

80809 München

www.wackerneuson.com

Tel.: +49-(0)89-354 02-0

Fax: +49-(0)89-354 02-390

Translation of the original operator’s manual in German

1 Foreword

1Foreword

This operator's manual contains information and procedures for the safe opera-

tion and maintenance of your Wacker Neuson machine. In the interest of your

own safety and to prevent accidents, you should carefully read through the safety

information, familiarize yourself with it and observe it at all times.

This operator's manual is not a manual for extensive maintenance and repair

work. Such work should be carried out by Wacker Neuson service or authorized

specialists.

The safety of the operator was one of the most important aspects taken into con-

sideration when this machine was designed. Nevertheless, improper use or in-

correct maintenance can pose a risk. Please operate and maintain your Wacker

Neuson machine in accordance with the instructions in this operator's manual.

Your reward will be troublefree operation and a high degree of availability.

Defective machine parts must be replaced immediately!

Please contact your Wacker Neuson representative if you have any questions

concerning operation or maintenance.

No part of this publication may be reproduced in any form or by any means, elec-

tronic or mechanical, including photocopying, without the expressed written per-

mission of Wacker Neuson.

Any type of reproduction, distribution or storage on data media of any type and

form not authorized by Wacker Neuson represents an infringement of copyright

and will be prosecuted.

We expressly reserve the right to make technical modifications – even without

special notice – which aim at further improving our machines or their safety stan-

dards.

1Foreword

BS 30

Betriebsanleitung 5

1 Foreword .................................................................................................................... 3

2 Introduction ............................................................................................................... 6

2.1 Means of representation for this operator's manual....................................................... 6

2.2 WACKER representative................................................................................................ 7

2.3 Described machine parts ............................................................................................... 7

3 Safety Information .................................................................................................... 8

3.1 Operating Safety ............................................................................................................ 8

3.2 Operator Safety while using Internal Combustion Engines.......................................... 10

3.3 Service Safety .............................................................................................................. 11

3.4 Safety and Operating Labels........................................................................................ 12

4 Operation ................................................................................................................. 14

4.1 Application.................................................................................................................... 14

4.2 Recommended Fuel..................................................................................................... 14

4.3 Before Starting ............................................................................................................. 14

4.4 To Start ........................................................................................................................ 15

4.5 Proper Operation.......................................................................................................... 15

4.6 Proper Compaction ...................................................................................................... 16

4.7 After operation.............................................................................................................. 16

5 Transport to work site ............................................................................................ 17

6 Maintenance ............................................................................................................ 18

6.1 Periodic Maintenance Schedule................................................................................... 18

6.2 Long-Term Storage ...................................................................................................... 18

6.3 Troubleshooting ........................................................................................................... 19

EC Declaration of Conformity ................................................................................ 21

Introduction BS 30

6 Operator's manual

2 Introduction

2.1 Means of representation for this operator's manual

Warning symbols

This operator's manual contains safety imformation of the categories:

DANGER, WARNING, CAUTION, NOTICE.

They should be followed to prevent danger to life and limb or damage to equip-

ment or improper service.

Notes

Note: Complementary information will be displayed here.

Instructions

fThis symbol indicates there is something for you to do.

1. Numbered instructions indicate that you have to carry out something in a defined

sequence.

This symbol is used for lists.

DANGER

This warning notice indicates hazards that result in serious injury or even death.

fDanger can be avoided by the following the actions mentioned.

WARNING

This warning notice indicates hazards that can result in serious injury or even

death.

fDanger can be avoided by the following the actions mentioned.

CAUTION

This warning notice indicates hazards that can result in minor injury.

fDanger can be avoided by the following the actions mentioned.

NOTICE

This warning notice indicates hazards that can result in material damage.

fDanger can be avoided by the following the actions mentioned.

BS 30 Introduction

Operator's manual 7

2.2 WACKER representative

Depending on your country, your Wacker Neuson representative is your Wacker

Neuson Service, your Wacker Neuson affiliate or your Wacker Neuson dealer.

You can find the addresses in the Internet at www.wackerneuson.com.

The addresses of the Wacker Neuson main locations are located at the end of

this operator's manual.

2.3 Described machine parts

This operator's manual is valid for different machine parts from a product range.

Therefore some figures can differ from the actual appearance of your machine.

It is also possible that the descriptions include components which are not a part

of your machine.

Details for the described machine types can be found in the chapter Technical

Data.

3 Safety Information BS 30

8 Operator's manual

3 Safety Information

3.1 Operating Safety

1. Never operate this machine in applications for which it is not intended.

2. Do not allow anyone to operate this equipment without proper training.

People operating this equipment must be familiar with the risks and hazards

associated with it.

3. Do not touch the engine or muffler while the engine is on or immediately after

it has been turned off. These areas get hot and may cause burns.

4. Do not use accessories or attachments that are not recommended by Wacker

Neuson. Damage to equipment and injury to the user may result.

5. Never leave the machine running unattended.

6. Never tamper with or disable the function of operating controls.

7. Never use the choke to stop the engine.

8. Never operate the machine in areas where explosions may occur.

9. Read, understand, and follow procedures in the Operator’s Manual before

attempting to operate the machine.

10. Make sure that all other persons are at a safe distance from the machine.

Stop the machine if people step into the working area of the machine.

11. Be sure operator is familiar with proper safety precautions and operation

techniques before using machine.

12. Always wear protective clothing appropriate to the job site when operating the

machine.

13. Wear hearing protection when operating equipment.

14. Always keep hands, feet, and loose clothing away from moving parts of the

machine.

15. Always use common sense and caution when operating the machine.

WARNING

Familiarity and proper training are required for the safe operation of the ma-

chine. Machines operated improperly or by untrained personnel can be hazard-

ous.

fRead the operating instructions contained in this manual and the engine

manual, and familiarize yourself with the location and proper use of all

controls.

fInexperienced operators should receive instruction from someone familiar

with the machine before being allowed to operate it.

BS 30 3 Safety Information

Operator's manual 9

16. Always be sure the rammer will not tip over, roll, slide, or fall when not being

operated.

17. Always turn the engine OFF when the rammer is not being operated.

18. Always guide the rammer in such a way that the operator is not squeezed

between the rammer and solid objects. Special care is required when working

on uneven ground or when compacting coarse material. Make sure to stand

firmly when operating the machine under such conditions.

19. When working near the edges of breaks, pits, slopes, trenches and platforms,

always operate the rammer in such a way that there is no danger of it tipping

over or falling in,

20. Store the machine properly when it is not being used. The machine should

be stored in a clean, dry location out of the reach of children.

21. Close fuel valve on engines equipped with one when machine is not being

operated.

22. Always operate machine with all safety devices and guards in place and in

working order. Do not modify or defeat safety devices. Do not operate

machine if any safety devices or guards are missing or inoperative.

3 Safety Information BS 30

10 Operator's manual

3.2 Operator Safety while using Internal Combustion Engines

1. Do not smoke while operating the machine.

2. Do not smoke when refueling the engine.

3. Do not refuel a hot or running engine.

4. Do not refuel the engine near an open flame.

5. Do not spill fuel when refueling the engine.

6. Do not run the engine near open flames.

7. Do not run the machine indoors or in an enclosed area such as a deep trench

unless adequate ventilation, through such items as exhaust fans or hoses, is

provided. Engine exhaust contains carbon monoxide. This is a poison you

cannot see or smell. Exposure to carbon monoxide can cause loss of

consciousness and CAN KILL YOU IN MINUTES.

8. Refill the fuel tank in a well-ventilated area.

9. Replace the fuel tank cap after refueling.

10. ALWAYS check the fuel lines and the fuel tank for leaks and cracks before

starting the engine. Do not run the machine if fuel leaks are present or the

fuel lines are loose.

DANGER

Internal combustion engines present special hazards during operation and fuel-

ing.

fRead and follow the warning instructions in the engine owner’s manual and

the safety guidelines below.

fFailure to follow the warnings and safety standards could result in severe

injury or death.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Wacker Neuson Baumaschinen Handbücher

Wacker Neuson

Wacker Neuson RTLx-SC3 Bedienungsanleitung

Wacker Neuson

Wacker Neuson BS-4 Bedienungsanleitung

Wacker Neuson

Wacker Neuson BS 50-2 Bedienungsanleitung

Wacker Neuson

Wacker Neuson AR Bedienungsanleitung

Wacker Neuson

Wacker Neuson VP Bedienungsanleitung

Wacker Neuson

Wacker Neuson RS 800A Bedienungsanleitung

Wacker Neuson

Wacker Neuson RD24 Bedienungsanleitung

Wacker Neuson

Wacker Neuson BS-2 Bedienungsanleitung

Wacker Neuson

Wacker Neuson RD40 Bedienungsanleitung

Wacker Neuson

Wacker Neuson IREN Bedienungsanleitung

Wacker Neuson

Wacker Neuson DT05 Bedienungsanleitung

Wacker Neuson

Wacker Neuson AP1840 Series Bedienungsanleitung

Wacker Neuson

Wacker Neuson IRFU Series Bedienungsanleitung

Wacker Neuson

Wacker Neuson BS Bedienungsanleitung

Wacker Neuson

Wacker Neuson RS600A Bedienungsanleitung

Wacker Neuson

Wacker Neuson MP70 Bedienungsanleitung

Wacker Neuson

Wacker Neuson BS Series Bedienungsanleitung

Wacker Neuson

Wacker Neuson RD24 Bedienungsanleitung

Wacker Neuson

Wacker Neuson M 1000 Bedienungsanleitung

Wacker Neuson

Wacker Neuson BPU 2540 Bedienungsanleitung

Wacker Neuson

Wacker Neuson DT10 Bedienungsanleitung

Wacker Neuson

Wacker Neuson RD 16 Bedienungsanleitung

Wacker Neuson

Wacker Neuson RD18 Bedienungsanleitung

Wacker Neuson

Wacker Neuson DT08-D Bedienungsanleitung

Beliebte Baumaschinen Handbücher anderer Marken

SASFORKS

SASFORKS EXTREME Bedienungsanleitung

Hailo

Hailo H-50 Bedienungsanleitung

Graco

Graco LineLazer ES 1000 Gebrauchs- und Pflegehandbuch

Greenlee

Greenlee 555RSC Bedienungsanleitung

Manitowoc

Manitowoc Grove CD3340B Bedienungsanleitung

Lux Tools

Lux Tools A-FMR-20 Set Bedienungsanleitung

SIP

SIP 03683 Bedienungsanleitung

Volvo

Volvo L30G Bedienungsanleitung

Grizzly

Grizzly G8712 Bedienungsanleitung

Modulift

Modulift CMOD 12 Bedienungsanleitung

Case

Case DV201 Bedienungsanleitung

Sealey

Sealey SC10.V2 Bedienungsanleitung

HYVA

HYVA AMCO VEBA 81 Series Bedienungsanleitung

Atlas Copco

Atlas Copco Dynapac V5100TV Bedienungsanleitung

Toro

Toro 323 Bedienungsanleitung

Manitowoc

Manitowoc National Crane 1400A Bedienungsanleitung

SGS

SGS EC1500 Bedienungsanleitung

Saferoad

Saferoad VR Arcus Primus 90 Series Bedienungsanleitung