Wacker Neuson M 1000 Bedienungsanleitung

www.wackergroup.com

Internal Vibrator

M 1000

M 2000

M 3000

OPERATOR’S MANUAL

0154561en 002

0303

0154561EN

HMS Table of Contents

wc_bo0154561002enTOC.fm 1

1. Foreword 3

2. Safety Information 4

2.1 Service Safety ...................................................................................... 5

2.2 Operating Safety .................................................................................. 5

2.3 Safety & Informational Labels .............................................................. 7

2.4 Label Locations .................................................................................... 7

3. Technical Data 8

3.1 Motors .................................................................................................. 8

3.2 Vibrator Heads ..................................................................................... 9

3.3 Shafts ................................................................................................. 10

3.4 Sound and Vibration Measurements .................................................. 10

4. Operation 11

4.1 Application .......................................................................................... 11

4.2 Recommended HMS Combinations ................................................... 12

4.3 Extension Cords ................................................................................. 13

4.4 Connecting Motor to Power Supply .................................................... 14

4.5 Assembling Head, Motor and Shaft .................................................... 15

4.6 Operation ............................................................................................ 16

5. Maintenance 17

5.1 Periodic Maintenance ......................................................................... 17

5.2 Motor Brushes .................................................................................... 18

5.3 Motor Housing .................................................................................... 19

5.4 Lubricating Shaft ................................................................................ 20

5.5 Lubricating H-Head ............................................................................ 21

5.6 Checking H-Head for Wear ................................................................ 22

5.7 Troubleshooting .................................................................................. 23

5.8 Wiring Schematics .............................................................................. 24

Table of Contents HMS

wc_bo0154561002enTOC.fm 2

Foreword

wc_tx000001gb electric.fm 3

1. Foreword

This manual provides information and procedures to safely operate

and maintain this Wacker model. For your own safety and protection

from injury, carefully read, understand and observe the safety

instructions described in this manual.

Keep this manual or a copy of it with the machine. If you lose this

manual or need an additional copy, please contact Wacker

Corporation. This machine is built with user safety in mind; however,

it can present hazards if improperly operated and serviced. Follow

operating instructions carefully! If you have questions about operating

or servicing this equipment, please contact Wacker Corporation.

The information contained in this manual was based on machines in

production at the time of publication. Wacker Corporation reserves the

right to change any portion of this information without notice.

All rights, especially copying and distribution rights, are reserved.

No part of this publication may be reproduced in any form or by any

means, electronic or mechanical, including photocopying, without

express written permission from Wacker Corporation.

Any type of reproduction or distribution not authorized by Wacker

Corporation represents an infringement of valid copyrights and will be

prosecuted. We expressly reserve the right to make technical

modifications, even without due notice, which aim at improving our

machines or their safety standards.

Safety Information HMS

wc_si000104gb.fm 4

2. Safety Information

This manual contains DANGER, WARNING, CAUTION, and NOTE

callouts which must be followed to reduce the possibility of personal

injury, damage to the equipment, or improper service.

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that follow this

symbol to avoid possible injury or death.

DANGER indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

CAUTION: Used without the safety alert symbol, CAUTION indicates

a potentially hazardous situation which, if not avoided, may result in

property damage.

Note: Contains additional information important to a procedure.

DANGER

WARNING

CAUTION

HMS Safety Information

wc_si000104gb.fm 5

2.1 Service Safety

When using electric tools, basic safety precautions should always be

followed to reduce the risk of fire, electric shock, and personal injury!

The guidelines following will help the user maintain operator safety.

2.1.1 NEVER use worn electrical cords. Severe electrical shock and

equipment damage may result.

2.1.2 Prevent body contact with grounded surfaces such as pipes, metal

railings, radiators and metal ductwork.

2.1.3 When motor is used outdoors, use only extension cords intended for

and marked for outdoor use.

2.1.4 ALWAYS keep all electrical cords away from heat, oil and sharp edges

which can damage them. Inspect all electrical cords before each use

and have damaged cords replaced or repaired at an authorized service

center.

2.1.5 Make certain motor is in good working order and properly grounded

before starting.

2.2 Operating Safety

Familiarity and proper training are required for the safe operation of

equipment! Equipment operated improperly or by untrained personnel

can be dangerous! Read the operating instructions contained in this

manual and familiarize yourself with the location and proper use of all

controls. Inexperienced operators should receive instruction from

someone familiar with the equipment before being allowed to operate

the machine.

2.2.1 Keep work area clean and free of clutter.

2.2.2 ALWAYS keep work area well lit.

2.2.3 NEVER allow children or people other than the operator to handle

power cable and extension cords.

2.2.4 NEVER operate motor in areas exposed to flammable or explosive

liquids or gases! The motor brushes spark during operating and could

ignite fumes.

2.2.5 NEVER overreach. Keep proper footing and balance at all times. Make

sure any supporting structures are strong enough and stable enough

to support your weight and the weight of any equipment on it.

2.2.6 ALWAYS remain aware of moving parts and keep hands, feet, and

loose clothing away from moving parts of equipment.

2.2.7 ALWAYS wear protective clothing appropriate to the job site when

operating equipment.

DANGER

WARNING

Safety Information HMS

wc_si000104gb.fm 6

2.2.8 Goggles or safety glasses will protect against eye damage caused by

flying debris.

2.2.9 NEVER carry motor by cord or pull on it to disconnect it from

receptacle. Keep cord away from heat, oil and sharp edges.

2.2.10 Keep handle, and other areas where motor and shaft are gripped, dry,

clean and free from oil and grease.

2.2.11 Avoid unintentional starting! Don't carry motor around jobsite while it

is connected to power source. Don't carry motor with finger on switch.

2.2.12 NEVER operate machine when you are tired. Remain alert, watch

what you are doing and use common sense.

2.2.13 NEVER operate machine if switch does not function properly. Have

defective switches replaced by authorized service center.

2.2.14 ALWAYS replace worn or damaged components with spare parts

designed and recommended by Wacker.

2.2.15 DO NOT overload motor. An overloaded motor will overheat. Use only

recommended head/motor/shaft combinations. See Table 1.

2.2.16 DO NOT allow untrained personnel to service this equipment. Only

trained electrical technicians should be allowed to service the electrical

components of this equipment.

2.2.17 NEVER attach shaft to motor while it is running.

2.2.18 ALWAYS check the power supply before running motor. Using the

wrong voltage supply will damage motor.

2.2.19 ALWAYS make sure motor switch is OFF before plugging motor to

power supply.

HMS Safety Information

wc_si000104gb.fm 7

2.3 Safety & Informational Labels

Wacker machines use international pictorial labels where needed.

These labels are described below:

2.4 Label Locations

Label Meaning

Wear eye, ear, and head protection when

operating machine.

Read the operator's manual for machine infor-

mation.

w c _ g r 0 0 1 2 0 8

F O R S A F E O P E R A T I O N R E A D

O P E R A T O R  S M A N U A L .

P O U R U N E O P E R A T I O N S Û R E

L I S E Z L A N O T I C E D  E M P L O I .

S I C H E R H E I T S A N L E I T U N G E N I N

E T R I E S V O R S C H R I F T L E S E N .

P A R A O P E R A C I O N S E G U R A L E A

M A N U A L D E O P E R A C I O N .

C A U T I O N

V O R S I C H T

P R E C A U T I O N

P R E C A U C I O N

Technical Data HMS

wc_td000103gb.fm 8

3. Technical Data

3.1 Motors

Item No. M 1000 (Green) M 2000 (Yellow) M 3000 (Red)

Motors

Voltage (AC/DC) V 115 230 115 230 115 230

Current (Maximum) A9 4,5156,520 10

Power kW (Hp) 1.0 (1.3) 1.0 (1.3) 1.7 (2.3) 1.5 (2.0) 2.3 (3.1) 2.3 (3.1)

Speed (No-load) rpm 15500 17500 16500

Weight kg (lbs.) 5.4 (12) 5.9 (13) 8.1 (18)

Motor type Universal electric motor

Frequency Hz 50/60

Phase 1

Andere Handbücher für M 1000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Wacker Neuson Baumaschinen Handbücher

Wacker Neuson

Wacker Neuson IRFU Series Bedienungsanleitung

Wacker Neuson

Wacker Neuson BS 50-2 Bedienungsanleitung

Wacker Neuson

Wacker Neuson RD 16 Bedienungsanleitung

Wacker Neuson

Wacker Neuson AR Bedienungsanleitung

Wacker Neuson

Wacker Neuson BS-4 Bedienungsanleitung

Wacker Neuson

Wacker Neuson RS600A Bedienungsanleitung

Wacker Neuson

Wacker Neuson VP Bedienungsanleitung

Wacker Neuson

Wacker Neuson BS Series Bedienungsanleitung

Wacker Neuson

Wacker Neuson BS-2 Bedienungsanleitung

Wacker Neuson

Wacker Neuson RTLx-SC3 Bedienungsanleitung

Wacker Neuson

Wacker Neuson MP70 Bedienungsanleitung

Wacker Neuson

Wacker Neuson DT05 Bedienungsanleitung

Wacker Neuson

Wacker Neuson DT10 Bedienungsanleitung

Wacker Neuson

Wacker Neuson RD24 Bedienungsanleitung

Wacker Neuson

Wacker Neuson WP 1550 Bedienungsanleitung

Wacker Neuson

Wacker Neuson BPU 2540 Bedienungsanleitung

Wacker Neuson

Wacker Neuson DT08-D Bedienungsanleitung

Wacker Neuson

Wacker Neuson RT82-SC3 Bedienungsanleitung

Wacker Neuson

Wacker Neuson RD40 Bedienungsanleitung

Wacker Neuson

Wacker Neuson RS 800A Bedienungsanleitung

Wacker Neuson

Wacker Neuson MP15 Bedienungsanleitung

Wacker Neuson

Wacker Neuson RD24 Bedienungsanleitung

Wacker Neuson

Wacker Neuson AP1840 Series Bedienungsanleitung

Wacker Neuson

Wacker Neuson RD18 Bedienungsanleitung

Beliebte Baumaschinen Handbücher anderer Marken

SASFORKS

SASFORKS EXTREME Bedienungsanleitung

Hailo

Hailo H-50 Bedienungsanleitung

Graco

Graco LineLazer ES 1000 Gebrauchs- und Pflegehandbuch

Greenlee

Greenlee 555RSC Bedienungsanleitung

Manitowoc

Manitowoc Grove CD3340B Bedienungsanleitung

Lux Tools

Lux Tools A-FMR-20 Set Bedienungsanleitung

SIP

SIP 03683 Bedienungsanleitung

Volvo

Volvo L30G Bedienungsanleitung

Grizzly

Grizzly G8712 Bedienungsanleitung

Modulift

Modulift CMOD 12 Bedienungsanleitung

Case

Case DV201 Bedienungsanleitung

Sealey

Sealey SC10.V2 Bedienungsanleitung

HYVA

HYVA AMCO VEBA 81 Series Bedienungsanleitung

Atlas Copco

Atlas Copco Dynapac V5100TV Bedienungsanleitung

Toro

Toro 323 Bedienungsanleitung

Manitowoc

Manitowoc National Crane 1400A Bedienungsanleitung

SGS

SGS EC1500 Bedienungsanleitung

Saferoad

Saferoad VR Arcus Primus 90 Series Bedienungsanleitung