Wali MF002 Bedienungsanleitung

MF002/MF002-W

Dual Monitor Desk Mount

75x75\100x100

INSTALLATION MANUAL

1-844-SATTLER (18447288537)

[email protected]

www.walielectric.com

(10kg/22lbs)x2

RATED

MAX 27”

WARNING

！

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.

SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may

cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.

Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect

assembly or inappropriate use.

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

TIPOVER WARNING

RT OF MONITOR OR STAND.

VESA Plate

d (x2)

Swivel Arm

c (x1)

Weighted Base

b (x1)

Pole

a (x1)

Wire Clip

n2 (x4)

Wire Clip

n1 (x1)

Grommet Base Plate

m (x1)

M4 Spacer

s (x8)

Nut

h (x2)

M5x14 Bolt

e (x3)

Wrench

p (x1)

Allen Key

o (x1)

M4x30 Bolt

r (x8)

M4x12 Bolt

q (x8)

M10 Bolt

i (x1)

Support Plate

j (x1)

M10 Washer

k (x1)

Spring Washer

l (x1)

Supplied Parts List

Install the Pole a to the weighted Base b using 3pcs M5x14 Bolts e , and tighten with the Allen key 3mm o .

This step is depending on your personal preference

To provide stability for a heavier monitor, we may recommend install the mount to the hole in your desk.

0.4‘’-3’’

b: Self-drilled Hole Installation

Option A: Free Standing Installation (Using V-vase)

a: Existing Grommet Hole Installation

ø 10m

0.4‘’-3”

(ø ")3/8

0.4‘’-3’’

a: Existing Grommet Hole Installation

Place Pole a onto Grommet Base Plate m .

Connect them from the bottom using M5x14

Bolt and tighten with Allen Key 3mm .

a m

2Put the Wire Clip n1 and Swivel Arm d through the Pole a , adjust the preferred height and

tighten using Allen Key 6mm o . Attach the Wire Clips n1 to the Swivel Arm d .

4Put the assembled TV/Monitor onto the Swivel Arm d and tighten the VESA Plate e with

Nut h for stability.

7Guide the cable through the Wire Clips ( n1, n2 ) and store the Allen Keys o in the Wire Clip n1 .

Adjust the tilt angle using Allen Key 5mm n .

Manually swivel, tilt, and rotate the monitor for the best viewing angle.

6For safety, please do not extend the arms too far forward or backward. This may cause

instability and tip over.

n1 n1

n1n2

b:Self-drilled Grommet Hole Installation

90°

ø 10mm

(ø ")3/8

Note: Please make sure two arms are aligned and balanced.

Ignore this step if monitors are level.

If one monitor is lower, remove the Nut h and turn the bolt counter-clockwise using

Allen key 3mm o to raise the monitor. Tighten the VESA Plate e with Nut h for stability

after the adjustment.

Select bolts and spacers (if needed) according to your TV/Monitor. Attach the VESA Plate to the Monitor and tighten with a screwdriver. (Screwdriver not included)

Step 4.1 Step 4.3a

Flat Back Monitor

Step 4.3b

Curved or Recessed Back Monitor

M4x12 M4x30

Step 4.2

Select Spacers ( if needed )

Select Monitor Screws

Only one screw size fits your Monitor

Hand thread screws into the

threaded inserts on the back

of your Monitor to determine

which screw (M4x12 or M4x30)

to use.

Option B :Grommet Base Installation (For saving more space)

0.4‘’-3’’

Dieses Handbuch passt für folgende Modelle

Andere Wali Rack & Stand Handbücher

Wali

Wali TVDVD-01 Bedienungsanleitung

Wali

Wali MF001-P Bedienungsanleitung

Wali

Wali MF002XLS Bedienungsanleitung

Wali

Wali MF002LM Bedienungsanleitung

Wali

Wali GSMP002 Bedienungsanleitung

Wali

Wali GSMP002 Bedienungsanleitung

Wali

Wali M001XL Bedienungsanleitung

Wali

Wali MATI001-G Bedienungsanleitung

Wali

Wali MF003S Bedienungsanleitung

Wali

Wali 011ARM Bedienungsanleitung

Wali

Wali 2655LO Bedienungsanleitung

Wali

Wali GPV002 Bedienungsanleitung

Wali

Wali GSDM002 Bedienungsanleitung

Wali

Wali PTT008 Bedienungsanleitung

Wali

Wali MF001 Bedienungsanleitung

Wali

Wali MF001 Bedienungsanleitung

Wali

Wali M001-W Bedienungsanleitung

Wali

Wali 1339LM-W Bedienungsanleitung

Wali

Wali TVS001 Bedienungsanleitung

Wali

Wali TVS001-W Bedienungsanleitung

Wali

Wali 1343LKS Bedienungsanleitung

Wali

Wali GSM001XL Bedienungsanleitung

Wali

Wali GSMP001W Bedienungsanleitung

Wali

Wali CS303 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung