Warn 70770 Bedienungsanleitung
PAGE 1 85553 Rev. A0
INSTALLATION INSTRUCTIONS
WARN Portable Anchor Plate
Part Number: 70770
Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided
installation and operating instructions and other information on labels and in this guide. This information alerts you to potential hazards
that could hurt you or others. It is not possible to warn you about all potential hazards associated with this product; you must use your
own good judgment.
CARELESS WINCH & ACCESSORY INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR
EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING
INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
This guide identifies potential hazards and has important safety messages that help you and others avoid personal injury
or death. WARNING and CAUTION are signal words that identify the level of hazard. These signal words mean:
WARNING signals a hazard that
could
cause serious injury or death, if you do not follow
recommendations.
CAUTION signals a hazard that
may
cause minor to moderate injury, if you do not follow
recommendations.
This guide uses
NOTICE
to call attention to important mechanical information, and Note: to emphasize general information worthy of
special attention
PAGE 2 85553 Rev. A0
Product Description: WARN Portable Anchor Plate
The WARN Portable Anchor Plate provides a stable anchoring platform for WARN utility winches. The plate
can allow a utility winch to be portable and anchored to a variety of objects.
Introduction
Thank you for choosing WARN for your utility winch needs. All WARN products have been designed and
manufactured for many years of problem-free operation. For future reference please record the following
information:
Model/Part Number: Date of Purchase:
Before you begin
Read the instructions completely to familiarize yourself with the installation process.
Review all the notices, cautions and warnings to make sure the kit will be installed correctly and safely.
Parts List
The WARN Portable anchor plate comes from the factory with the items pictured below. Depending upon your
application, it may be necessary for you to source grade 5 or better fasteners front a hardware store.
The kit comes with one mounting plate (#1) and two anchor chains with hooks (#2).
1
2
PAGE 3 85553 Rev. A0
Installing the Winch to the Portable Anchor Plate
Installation of Winch
Identify the whole pattern for your winch. Install the winch per your application using the hardware included
in the winch. Refer to the winch user manual for specific winch installation information.
For the 4700 and early utlity winches
that did not have the integrated
fairlead, it will be necessary to use
the fairlead plate provided with the
winch.
Simply sandwich the fairlead plate
between the winch and the Portable
Anchor Plate.
1700 & 1500AC
3700 & 3200AC
4700
Fairlead Plate
Portable Anchor Plate
PAGE 4 85553 Rev. A0
Using the Portable Anchor Plate Anchors
Anchor Chain Attachment to Plate
Attach each of the two chains as follows:
Thread at least six chain links through one of the two large holes in the winch mounting plate. (Fig. A)
Engage a chain link into the mounting plate key slot. (Fig. A)
To hold the engaged chain link in place, drape the threaded chain links over the edge of the mounting
plate. During operation, tension will hold the engaged chain link in place. (Fig. B)
Key slot engagement
6 chain links
Mounting plate
High test chain
Fig. A
Fig. B
PAGE 5 85553 Rev. A0
Using the UMP with the Chain Anchors - Continued
Warning
Moving Parts Entanglement Hazard
Failure to observe these instructions could lead to severe injury or death.
ALWAYS keep hands clear of the wire rope, hook loop, hook and fairlead opening
during installation, operation and when spooling in or out.
ALWAYS use supplied hook strap whenever spooling the wire rope in or out, during
installation, or operation to avoid injury to hands or fingers.
General Rigging Guidelines
Always choose an anchor point suitably
strong for the job.
Always spool out as much cable as
possible when preparing to pull a load.
Pick an anchor point as far away as
practical from the object you wish to pull.
This provides the winch with its greatest
pulling power.
Rigging a double line with a snatch block
will reduce the load on the winch to half
without significant loss of spooling speed.
Natural anchors such as trees, stumps
and rocks are the handiest when
available.
Attach the choker chain, wire choker rope
or tree trunk protector on the anchor as
low as possible to avoid pulling the
anchor down.
If several possible anchors are available
but they are not strong enough
individually, it may be practical to attach a
wire or chain choker around several
anchors to form a strong collective anchor
point.
PAGE 6 85553 Rev. A0
Customer Support
WARRANTY
See separate sheet packed with winch
-Or-
If warranty sheet is lost or misplaced contact:
Warn Industries, Inc.
Customer Service Dept.
12900 SE Capps Rd
Clackamas, OR 97015-8903.
United States:
Phone: 503.722.1200 or (800) 543-9276 (US only)
Fax: 503.722-3000
International:
Phone: 503.722.3008
Fax: 503.722.3005
Inhaltsverzeichnis
Andere Warn Autozubehör Handbücher
Warn
Warn 106576 Bedienungsanleitung
Warn
Warn 95475 Bedienungsanleitung
Warn
Warn 80554 Bedienungsanleitung
Warn
Warn 96550 Bedienungsanleitung
Warn
Warn 101676 Bedienungsanleitung
Warn
Warn 79403 Bedienungsanleitung
Warn
Warn 82530 Bedienungsanleitung
Warn
Warn 80360 Bedienungsanleitung
Warn
Warn 83680 Bedienungsanleitung
Warn
Warn 102547 Bedienungsanleitung
Warn
Warn 79840 Bedienungsanleitung
Warn
Warn 98026 Bedienungsanleitung
Warn
Warn 90865 Bedienungsanleitung
Warn
Warn 60174 Bedienungsanleitung
Warn
Warn 101694 Bedienungsanleitung
Warn
Warn 100878 Bedienungsanleitung
Warn
Warn Ford Performance M-1821-SD Bedienungsanleitung
Warn
Warn Kubota 500 Bedienungsanleitung
Warn
Warn 68710 Bedienungsanleitung
Warn
Warn 101316 Bedienungsanleitung
