Wasp WPS1500 Bedienungsanleitung
QUICK REFERENCE GUIDE
WPS1500
Omnidirectional Imaging Scanner
ORIGINAL VERSION
See the Regulatory Addendum included with your product
for additional regulatory, safety and legal information.
Wasp Barcode Technologies
1400 10th St.
Plano, TX 75024
Tel. 866-547-9277
©2020 Wasp Barcode Technologies and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of this
documen-tation may be reproduced, stored in or introduced into a retrieval system,
or transmitted in any form or by any means, or for any purpose, without the express
written permission of Wasp Barcode Technologies (referenced as Wasp) and/or its
affiliates.
Owners of Wasp products are hereby granted a non-exclusive, revocable license
to reproduce and transmit this documentation for the purchaser's own internal
business purposes. Purchaser shall not remove or alter any proprietary notices,
including copyright notices, contained in this documentation and shall ensure that
all notices appear on any reproductions of the documentation.
Electronic versions of this document may be downloaded from the Wasp website
(www.waspbarcode.com). If you visit our website and would like to make
comments or suggestions about this or other Wasp publications, please let us
know via the "Contact" page.
Disclaimer
Wasp has taken reasonable measures to provide information in t his manual that is
complete and accurate, however, Wasp shall not be liable for technical or editorial
errors or omissions contained herein, nor for incidental or consequential damages
result-ing from the use of this material. Wasp reserves the right to change any
specification at any time without prior notice.
Trademarks
Wasp Barcode Technologies and the Wasp logo are registered trademarks of Wasp
in many countries, including the U.S.A. and the E.U.
Patents
See www.waspbarcode.com for patent list.
QUICK REFERENCE GUIDE
TABLE OF CONTENTS
Quick Reference ............................................................... 1
Features .......................................................................... 1
German GS Safety Certification ...............................................3
Installation ....................................................................... 3
Optional Stand/Riser..................................................................... 4
Removing the Stand/Bottom Cover ........................................4
Magnetic Base Mounting.............................................................. 4
How to Scan ..................................................................... 5
Handheld Scanning Mode............................................................. 5
Center Zone Qualification ............................................................. 6
Scanner Button ............................................................................. 6
Scanner Button Functions .......................................................6
LED and Beeper Indicators................................................ 8
Programming ................................................................. 10
Service Port Mode .................................................................10
Using Barcodes........................................................................... 10
Interface Selection ...................................................................... 11
Good Read Green Spot Duration................................................ 12
Cell Phone Mode ......................................................................... 13
Cell Mode Frequency .................................................................. 14
Troubleshooting.............................................................. 15
Error Codes ................................................................................. 16
Cleaning......................................................................... 17
Manufacturer Approved Cleaning Materials.............................. 18
Warranty........................................................................ 19
WASP WPS1500
NOTES
WPS1500
QUICK REFERENCE
This guide is provided to help get your scanner up and running quickly
and efficiently. For more details, including a nal programming
informa on, reference the Product Reference Guide (PRG), which is
available from the Wasp website.
FEATURES
Figure 1. Scanner Features - Front View
Tilting Stand
Good Read Light Pipe/
Scan
Window
Beeper Grille
Illumination LEDs
Scanner Button
QUICK REFERENCE GUIDE 1
2
WPS1500
Figure 2. Scanner Features - Bottom View
Figure 3. Labeling
NOTE
Remove the stand/cover to view the Regulatory
Labeling, as described on page 4. Labels are shown
to illustrate their location only. Please view the
labels on your product for actual details.
Power/Interface
Power/interface Cable
Latch Release Hole
Stand
Regulatory
Label (under
Regulatory
Label (under
Serial Number bottom cover)
bottom cover)
German GS Safety Certification
The following statement is required for the German GS safety
certification:
INSTALLATION
Route the interface cable from the terminal or host. Plug the AC adapter
(if one is used) into a wall outlet and the interface (I/F) cable, then route
and attach the I/F cable to the scanner. Verify operation by presenting
known-good bar codes to the scanner. The unit should beep1and/or
flash its good read LED and send the bar code data to the host or
terminal. If not, refer to the Troubleshooting section of this guide.
The WPS1500 uses intelligent illumination technology to optimize light
levels for a variety of bar code scanner functions including
automatic reading of bar codes from printed surfaces, mobile devices
and image capture in variable contrast environments.
This product is not intended for use in the immediate or direct visual
field of the display work place. To avoid disturbing reflections on
the display work place, this product shall not be placed in the
immediate or direct field of vision.
1. Beeper and LED behavior is selectable and may have been disabled by a pre-
vious user.
Connect
Here
I/F Cable
To Host/Terminal
A/C Adapter
(if needed)
QUICK REFERENCE GUIDE 3
Optional Stand/Riser
An optional stand / riser is available for the scanner. The stand and riser
have anti-skid pads on the bottom and can rest on any desired
horizontal surface or countertop. The scanner (along with the stand/
riser) can be easily repositioned on the counter or lifted for portable
use.
Removing the Stand/Bottom Cover
1. Unplug the Power Interface Cable by inserting a paper clip or
similar object into the latch release hole as shown in Figure 2 on
page 2.
2. After removing the Interface Cable, pull the bottom of the Stand
forward (in the direction of the Front Window) to detach it from
the unit. It will snap free easily if oriented correctly.
Magnetic Base Mounting
The magnetic swivel base can be used to semi-permanently attach a
scanner to a flat surface (vertical or horizontal), using the provided
adhesive or screw. Both the stand and riser options mount onto the
CAUTION
Do not attempt to remove the Stand without first
unplugging the Cable as described. Doing so may
result in damage to the scanner.
Front Window
Stand
4
WPS1500
magnetic swivel base and are held magnetically in place. The scanner
can easily be rotated to a desired orientation. The scanner (along with
the riser or stand) can be detached for portable use by lifting the entire
unit as shown in Figure 4 on page 5.
HOW TO SCAN
Bar codes can be presented to the scanner while it is resting on the
counter or in the optional stand, or the scanner can be picked up for
targeted scanning.
Figure 4. Scanning Methods
Handheld Scanning Mode
To read a barcode using Handheld Scanning Mode:
1. Pick up the scanner- the aimer LED will illuminate automatically.
2. With the aimer over the barcode to be read, press and release
the button.
Upon a successful read, the button will blink bright green and the
green spot will illuminate, highlighting the decoded barcode.
Scan Button/
PRESENTATION MODE
Good Read
HANDHELD MODE
Indicator
QUICK REFERENCE GUIDE 5
Center Zone Qualification
The configurable Center Zone can be set to limit the scan area to allow
Targeted Scanning of pick lists or other special items. Bar codes will read
in any orientation. The scanner will return to full pattern Presentation
Mode when set back down, after a configurable time has elapsed.
Scanner Button
The Scanner Button performs multiple functions, depending on how
long it is pressed:
Scanner Button Functions
NOTE
The Scanner Button functions shown below are
operational only when the Scanner is stationary. When
in Hand/Portable mode, the button acts as a trigger to
enable the reading of a barcode label.
PRESS
DURATION FUNCTION COMMENT
Momentary (when
scanner is asleep)
Wakes scanner from
Sleep Mode
Alternatively, the scanner can
be awakened by moving an
object through the scan zone.
Momentary (when
scanner is awake) Increments volume
Press the button momentarily
to increase speaker volume.
When the loudest volume is
reached, a repeated press of the
button cycles volume back to
the lowest setting, then volume
increases on subsequent
press(es). Five volume levels
are available.
Hold, then release
when the beeper
sounds
Increments tone
Press the button for
approximately 2 seconds, then
release. Each time this is done,
the beeper will sound at one of
three tones. Stop when the
desired tone (high, medium or
low) is sounded.
6 WPS1500
Inhaltsverzeichnis
Andere Wasp Barcode-Lesegerät Handbücher
Wasp
Wasp WWS800 Bedienungsanleitung
Wasp
Wasp WLS 9500 Bedienungsanleitung
Wasp
Wasp WDI4600 Bedienungsanleitung
Wasp
Wasp WLS8600 Bedienungsanleitung
Wasp
Wasp WWS550i Installationsanleitung
Wasp
Wasp WWS750 Bedienungsanleitung
Wasp
Wasp WWS550i Bedienungsanleitung
Wasp
Wasp WLR8900 Betriebsanleitung
Wasp
Wasp CCD - 80SIR Bedienungsanleitung
Wasp
Wasp WWS150i Bedienungsanleitung
Wasp
Wasp WLP 4170 Betriebsanleitung
Wasp
Wasp WDI9600 Bedienungsanleitung
Wasp
Wasp WPL618 Series Bedienungsanleitung
Wasp
Wasp WLS 9500 Bedienungsanleitung
Wasp
Wasp WLR8900 Betriebsanleitung
Wasp
Wasp WWR2900 Betriebsanleitung
Wasp
Wasp 2D Bedienungsanleitung
Wasp
Wasp WDI4500 Bedienungsanleitung
Wasp
Wasp WDI4500 Bedienungsanleitung
Wasp
Wasp WWS500 Betriebsanleitung
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
