Wasp WWS800 Handbuch

Portal > Knowledgebase > Hardware > Scanners > WWS800/850 > WWS800 or WWS850 scanner setup instructions

WWS800 or WWS850 scanner setup instructions

Sicaro Burnett - 2017-07-14 - in WWS800/850

Notes & steps for getting the WWS800 or WWS850 to work with a Bluetooth base:

A. Look at the bottom of the base. If there are 2 barcode labels (1 with Set Connection and 1 serial number) this is the Bluetooth

base, and it is the easiest base to work with. There is another base which is charging only, and it does not have a Set Connection

barcode. If it's charging-only, a separate Bluetooth adapter (or built-in Bluetooth) will need to be used.

B. The base has an AC adapter that needs to be plugged in so the base is powered on, with red or blue LEDs lit up.

C. The data communication cable has an HD15 plug at one end that connects to the base. Usually the other end of that cable is

USB. If it's PS2 (round) or serial (9-pin trapezoid), a USB cable can be purchased from Wasp since it is by far the easiest to work

with.

Steps to pair a WWS800 or WWS850 scanner to its Bluetooth base station:

1. From the bottom of the base, scan the Set Connection barcode. If it beeps 3 times, go to Step 4.

Note: If you have trouble scanning this one, you can scan Set Connection from page 1 of the Reference Guide; these are identical.

2. Then scan the serial number barcode next to it.

3. Test the connection by opening Notepad, MS Word, or some other application that accepts text input from a keyboard, then

scan a barcode from the Test Symbols section of the manual, or a UPC barcode from a product. The application should show the

data from the barcode.

If it's not working, we need to set the scanner to defaults. If you don't have a hardcopy already, print a page from the Reference

Guide PDF. Usually this is PDF page 3, which will show pages 1 & 2 at the bottom of the printed page.

4. From page 2 at the bottom, scan the Enter Setup barcode.

5. From page 1 at the top, scan the Restore Default Settings barcode.

6. From page 1 at the bottom, scan the Update barcode.

7. Go back to step 1.

Scanner User Manuals, Programming Reference Guides, Quick Reference Guides, Quick Start Guides (multiple models)

How to set the WWS800 or WWS850 to factory default

Andere Handbücher für WWS800

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Wasp Barcode-Lesegerät Handbücher

Wasp

Wasp WLS8600 Bedienungsanleitung

Wasp

Wasp WWS800 Bedienungsanleitung

Wasp

Wasp Bar Code Laser Betriebsanleitung

Wasp

Wasp CCD Scanner Betriebsanleitung

Wasp

Wasp WLP 4170 Betriebsanleitung

Wasp

Wasp Wasp WDI7500 Bedienungsanleitung

Wasp

Wasp WLR8900 Betriebsanleitung

Wasp

Wasp WDI4500 Bedienungsanleitung

Wasp

Wasp WLR8950 Bedienungsanleitung

Wasp

Wasp WPL304 Bedienungsanleitung

Wasp

Wasp WWS110i Bedienungsanleitung

Wasp

Wasp WLS 9500 Bedienungsanleitung

Wasp

Wasp WLP 4170 Bedienungsanleitung

Wasp

Wasp WDI4500 Bedienungsanleitung

Wasp

Wasp WWS500 Betriebsanleitung

Wasp

Wasp WWS800 Bedienungsanleitung

Wasp

Wasp WPA 1200 II Bedienungsanleitung

Wasp

Wasp WLS8600 Bedienungsanleitung

Wasp

Wasp WWS150i Bedienungsanleitung

Wasp

Wasp WPL608 Bedienungsanleitung

Wasp

Wasp WWS550i Installationsanleitung

Wasp

Wasp WDT 3200 Installations- und Betriebshandbuch

Wasp

Wasp WWS650 Bedienungsanleitung

Wasp

Wasp WPL610 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung