15 16
BATTERY USEINSTRUCTIONS
TIPS:
Shortcircuitof the cathode and the anode at the battery'sinput.
Keep itawayfrom children, fire andheat source. It is strictly forbidden
to throw it into the fire; Violent movements, shock and extrusion are
prohibited;
Only the specified charger can be used, and other chargers are
prohibited to charge the battery;
This product has been subjected to strict inspection before leaving
factory, and it is strictly prohibited to dismantle it. Please contact our
company's after-sales department for anyquestion.
TIPS:
Do not expose the battery to water, and prevent it from being
damped by water or rained.
Charge temperature: 0-45 °C, discharge temperature: -20-45 °C;
Battery capacity will be reduced when placed in a low-temperature
environment;
Charge the battery when you use it, but make sure to charge it before
the capacity is lower than 20%. When itis not used
for a long time, please remove it from the scooter.
Pull up the battery from scooter,insert the main charger plug into the charging socket of the battery. Insert the chargers AC power plug into the home power
socket, and the battery starts charging when the charger indicator turns red.The batteryis fully charged if the chargerindicator turns from red to green.
2
BATTERY USE INSTRUCTIONS
Insertthe main charger pluginto the charging port of the scooter.
Insert the chargers AC power plug into the home power socket, and the battery starts charging when the charger indicator turns red. The battery is fully charged
if the chargerindicator turns from red to green.
How to Charge the Battery
1
1
Charging Interface
I
2
3
11
Input power terminal: connect the output charging end and plug
the input power terminal into AC supply.
Output charging end:Before charging, use the output end to
connect the battery, make sue the socket be plugged in
properbly.
Please use the special matching charger for charging, charging
time of a single set battery is normally with in 3~4h.
Input power terminal
2Output charging end
3Power indicator
