Weider CLUB WEBE10660.0 Bedienungsanleitung

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Model No. WEBE1066.0

Serial No.

Write the serial number in the

space above for future reference.

Serial Number Decal (Under Seat)

QUESTIONS?

As a manufacturer,we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if a part is

damaged or missing, PLEASE

CONTACT OUR CUSTOMER

SERVICE DEPARTMENT

DIRECTLY.

CALL TOLL-FREE:

1-877-992-5999

Mon.–Fri., 6 a.m.–6 p.m. MST

ON THE WEB:

www.weiderservice.com

USER’S MANUAL

Visit our website at

www.weiderfitness.com

new products, prizes,

fitness tips, and much more!

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

TABLE OF CONTENTS

WEIDER is a registered trademark of ICON IP, Inc.

1. Read all instructions in this manual and all

warnings on the weight bench before using

the weight bench. Use the weight bench only

as described in this manual.

2. It is the responsibility of the owner to ensure

that all users of the weight bench are ade-

quately informed of all precautions.

3. The weight bench is intended for home use

only. Do not use the weight bench in any

commercial, rental, or institutional setting.

4. Keep the weight bench indoors, away from

moisture and dust. Place the weight bench on

alevel surface, with a mat beneath it to pro-

tect the floor or carpet.

5. Make sure that there is enough clearance

around the weight bench to mount, dismount,

and use the weight bench.

6. Inspect and properly tighten all parts regular-

ly.Replace any worn parts immediately.

7. Make sure the set screw attaching the

Olympic adapter is properly tightened each

time the adapter is used.

8. Keep hands and feet away from moving parts.

9. Always set both weight rests at the same

height.

10. Keep children under 12 and pets away from

the weight bench at all times.

11. Always wear athletic shoes for foot protec-

tion while exercising.

12. The weight bench is designed to support a

maximum user weight of 300 pounds and a

maximum total weight of 610 pounds. Do not

place more than 310 pounds, including a bar-

bell, on the weight rests. Do not place more

than 150 pounds on the leg lever. Note: The

weight bench is designed to be used with an

Olympic barbell. The weight bench does not

include a barbell or weights.

13. Always place an equal amount of weight on

each side of the barbell.

14.

Always exercise with a partner. Your partner

should be ready to catch the barbell if you

cannot complete a repetition.

15. If you feel pain or dizziness at any time while

exercising, stop immediately and begin cool-

ing down.

16. The decal shown below has been placed on

the weight bench. If the decal is missing or

illegible, call the toll-free telephone number

on the front cover of this manual and order a

free replacement decal. Apply the decal in the

location shown.

WARNING: Toreduce the risk of serious injury, read the following important precautions

before using the weight bench.

IMPORTANT PRECAUTIONS

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

Upright

Adjustment Tube Backrest

Curl Pad

Weight Rest

Storage Tube

Right Side

Left Side

Note: The terms “right side” and “left side” are determined

relative to a person sitting on the weight bench; they do not

correspond to right and left on the drawings in the manual.

Leg Lever

Olympic Adapter

Seat

BEFORE YOU BEGIN

Thank you for selecting the versatile WEIDER®CLUB

weight bench. The weight bench offers a selection of

weight stations designed to develop every major mus-

cle group of the body. Whether your goal is to tone

your body, build dramatic muscle size and strength, or

improve your cardiovascular system, the weight bench

will help you to achieve the specific results you want.

For your benefit, read this manual carefully before

using the weight bench. If you have questions after

reading this manual, please see the front cover of this

manual. To help us assist you, note the product model

number and serial number before contacting us. The

model number is WEBE1066.0. The serial number can

be found on a decal attached to the weight bench (see

the front cover of this manual).

To avoid a registration fee for any service needed

under warranty, you must register the weight bench

at www.weiderservice.com/registration.

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled.

ASSEMBLED DIMENSIONS:

Height: 61 in. / 155 cm

Width: 42 in. / 107 cm

Depth: 60 in. / 152 cm

M10 Nylon

Locknut (40)

M8 Washer (43)

M8 Nylon

Locknut (52)

M6 Washer (42)

M10 x 140mm Bolt (50)

M6 x 25mm

Screw (49)

25mm Round

Outer Cap (34)

M10 x 70mm Bolt (55)

M10 x 55mm Bolt (53)

Olympic

Adapter

Cap (29)

M8 x 10mm

Set Screw (51)

M10 x 95mm Bolt (45)

M10 x 50mm Carriage

Bolt (44)

M8 x 55mm Bolt (46)

M6 x 40mm Screw (48)

M10 x 60mm Bolt (54)

M10 Washer (41)

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-

ing is the key number of the part, from the PART LIST on page 18 of this manual. Note: Some small parts may

have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

ASSEMBLY

Insert four M10 x 50mm Carriage Bolts (44) up

through the Right Rear Stabilizer (6). Attach the

Right Upright (9) to the Stabilizer with the

Carriage Bolts and two M10 Nylon Locknuts (40).

Do not tighten the Nylon Locknuts yet.

Repeat this step with the Left Rear Stabilizer

(5) and the Left Upright (8).

Before beginning assembly,make sure you

understand the information in the box

above. For help identifying small parts,

use the PART IDENTIFICATION CHART on

page 5.

To hire an authorized service technician to

assemble the weight bench, call toll-free

1-800-445-2480.

Before beginning assembly, carefully read the

following information and instructions:

•Because of its weight and size, the weight bench

should be assembled in the location where it will

be used. Make sure that there is enough clear-

ance to walk around the weight bench as you

assemble it.

•Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until assembly is completed.

•Tighten all parts as you assemble them, unless

instructed to do otherwise.

•As you assemble the weight bench, make sure all

parts are oriented as shown in the drawings.

•Assembly requires two people.

• For help identifying small parts, use the PART

IDENTIFICATION CHART on page 5.

The included grease, and the following tools

(not included) may be required for assembly:

• Two adjustable wrenches

• One rubber mallet

• One standard screwdriver

• One Phillips screwdriver

• Clear tape or masking tape

Assembly will be more convenient if you have a

socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

Make Assembly Easier

Everything in this manual is designed to ensure

that the weight bench can be assembled suc-

cessfully by anyone. Most people find that set-

ting aside plenty of time helps assembly go

smoothly.

2. Attach the Crossbar (2) to the Left Upright (8)

with two M10 x 95mm Bolts (45), two M10

Washers (41), and two M10 Nylon Locknuts (40).

Do not tighten the Nylon Locknuts yet.

Repeat this step with the Right Upright (not

shown).

3. Attach the Left Rear Support (10) to the Left

Upright (8) and the Left Rear Stabilizer (5) with

two M10 x 55mm Bolts (53), an Upright Bracket

(17), and four M10 Nylon Locknuts (40). Do not

tighten the Nylon Locknuts yet.

Repeat this step with the Right Upright (not

shown) and the Right Rear Stabilizer (not

shown).

4. Attach the Front Leg (3) to the Front Stabilizer (4)

with two M10 x 95mm Bolts (45) and two M10

Nylon Locknuts (40). Do not tighten the Nylon

Locknuts yet.

5. Orient the Seat Frame (1) so that the hexagonal

holes are on the bottom. Attach the Seat Frame

tothe Crossbar (2) with two M10 x 55mm Bolts

(53), two M10 Washers (41), two M10 Nylon

Locknuts (40), an M10 x 60mm Bolt (54), and an

M10 Nylon Locknut (40). Do not tighten the

Nylon Locknuts yet.

6. See the inset drawing. Tighten the “T”-handle

(25) into the Seat Carriage (7).

Pull the “T”-handle (25) out as far as it will go and

slide the Seat Carriage (7) onto the Seat Frame

(1).

Attach the Front Leg (3) to the Seat Frame (1)

with four M8 x 55mm Bolts (46) and four M8

Nylon Locknuts (52). Do not tighten the Nylon

Locknuts yet.

7. Set the pins on the Adjustment Tube (14) down

into a set of brackets on the Left and Right

Uprights (8, 9).

Tighten the M10 Nylon Locknuts (40) used in

steps 1–5, and the M8 Nylon Locknuts (52)

used in step 6.

241 40

Hexagonal

Holes

752

8. Attach the Backrest (18) to the two Backrest

Frames (16) with four M6 Washers (42) and four

M6x40mm Screws (48). Donot tighten the

Screws yet.

9. Grease an M10 x 140mm Bolt (50). Attach the

Backrest Frames (16) to the Seat Carriage (7)

with the Bolt, two M10 Washers (41), and an M10

Nylon Locknut (40). Do not overtighten the

Nylon Locknut; the Backrest Frames must be

able to pivot easily.

Tighten the four M6 x 40mm Screws (48) used

in step 8.

10. Orient the Seat (19) with the wide end toward the

Backrest (18). Attach the Seat to the Seat

Carriage (7) with four M6 x 25mm Screws (49).

Wide

End

41 40

11. Grease an M10 x 70mm Bolt (55). Attach the Leg

Lever (12) to the Front Leg (3) with the Bolt and

anM10 Nylon Locknut (40). Donot overtighten

the Nylon Locknut; the Leg Lever must be

able to pivot easily.

12. Attach the Weight Tube (22) to the Leg Lever (12)

with an M8 x 55mm Bolt (46), two M8 Washers

(43), a Weight Tube Bushing (56), and an M8

Nylon Locknut (52).

Press the 25mm Round Outer Cap (34) onto the

end of the Weight Tube (22).

13. Insert a Pad Tube (21) into either hole in the

Front Leg (3). Slide two Foam Pads (24) onto the

Pad Tube.

Insert a Pad Tube (21) into the upper hole in the

Leg Lever (12). Slide two Foam Pads (24) onto

the Pad Tube. Press a Large Pad Tube Cap (27)

into each end of the Pad Tube.

Repeat this step with the other Pad Tube (21)

and the Leg Lever (12).

Inhaltsverzeichnis

Andere Weider Heim-Fitnessstudio Handbücher

Weider

Weider WESY85201 Bedienungsanleitung

Weider

Weider C103 Bedienungsanleitung

Weider

Weider 3130 Bedienungsanleitung

Weider

Weider 190 Tc Bench Einrichtungshandbuch

Weider

Weider Pro 450 Bedienungsanleitung

Weider

Weider E8000 Gym Bedienungsanleitung

Weider

Weider Wb-450 Bench Bedienungsanleitung

Weider

Weider Flex 944 Bedienungsanleitung

Weider

Weider 200 Power Tower Bench Benutzerhandbuch

Weider

Weider Pro 2000 Bedienungsanleitung

Weider

Weider PRO 270 L Bedienungsanleitung

Weider

Weider Pro 475 Bedienungsanleitung

Weider

Weider PRO 290 W Bedienungsanleitung

Weider

Weider 8630 Training Bedienungsanleitung

Weider

Weider WB-341 Bedienungsanleitung

Weider

Weider 8970 Bedienungsanleitung

Weider

Weider ADVANTAGE 831.153961 Bedienungsanleitung

Weider

Weider WEBE8912.0 Bedienungsanleitung

Weider

Weider 9900i Bedienungsanleitung

Weider

Weider PRO 635 Bedienungsanleitung

Weider

Weider Pro 2000 Kurzanleitung

Weider

Weider D710 Ultra Bedienungsanleitung

Weider

Weider PRO 800 831.150741 Bedienungsanleitung

Weider

Weider WEEVBE33110 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

ParaBody

ParaBody 40 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung

Insportline

Insportline RW600 Bedienungsanleitung

Stamina

Stamina 55-1532 Bedienungsanleitung

Tunturi

Tunturi R25 Bedienungsanleitung

CYBEX

CYBEX Jungle Gym 17000 Bedienungsanleitung