Weslo Cadence 45 Treadmill Bedienungsanleitung

USER'S MANUAL

Serial Number Decal

Model No. WETL17105.0

Serial No.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction.

If you have questions, or if there

are missing or damaged parts,

please contact the establishment

where you purchased this prod-

uct.

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: A PART IDENTIFICATION CHART, an EXPLODED DRAWING, and a PART LIST are attached in the

center of this manual.

WESLO is a registered trademark of ICON IP, Inc.

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with at

least 2.5 m (8 ft.) of clearance behind it and

0.5 m (2 ft.) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. Keep children under the age of 12 and pets

away from the treadmill at all times.

7. The treadmill should not be used by persons

weighing more than 113 kg (250 lbs.).

8. Never allow more than one person on the

treadmill at a time.

9. Wear appropriate exercise clothes while

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women.

Always wear athletic

shoes; never use the treadmill with bare feet,

wearing only stockings, or in sandals.

10. When connecting the power cord (see page 9),

plug the power cord into an earthed circuit. No

other appliance should be on the same circuit.

When replacing the fuse, an ASTA approved

BS1362 type should be fitted to the fuse carrier.

A13 amp fuse should be used.

11. If an extension cord is needed, use only a 3-

conductor, 1mm2(14-gauge) cord that is no

longer than 1.5 m (5 ft.).

12. Keep the power cord away from heated sur-

faces.

13. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See MAIN-

TENANCE AND TROUBLESHOOTING on page

13 if the treadmill is not working properly.)

14. Read, understand, and test the emergency

stop procedure before using the treadmill (see

OPERATION AND ADJUSTMENT on page 9).

15. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

16. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

17. Never leave the treadmill unattended while it is

running. Always remove the key and unplug

the power cord when the treadmill is not in use.

18. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6 and HOW TO FOLD

AND MOVE THE TREADMILL on page 12.)

You must be able to safely lift 20 kg (45 lbs.)

to raise, lower, or move the treadmill.

19. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

20. Do not change the incline of the treadmill by

placing objects under the treadmill.

The decal shown at the right has been placed on the

treadmill. If the decal is missing or illegible, contact the

establishment where you purchased this product and

order a free replacement decal. Apply the decal in the lo-

cation shown. Note: The decal is not shown at actual

size.

50%

21. Inspect and properly tighten all parts of the

treadmill regularly.

22. Never drop or insert any object into any

opening.

23. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

24. This treadmill is intended for in-home use

only. Do not use this treadmill in any commer-

cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

Thank you for selecting the WESLO®CADENCE A45

treadmill. The CADENCE A45 treadmill combines ad-

vanced technology with innovative design to let you

enjoy an excellent form of cardiovascular exercise in

the convenience and privacy of your home. And when

you’re not exercising, the unique CADENCE A45 tread-

mill can be folded up, requiring less than half the floor

space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill.If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before calling. The model

number of the treadmill is WETL17105.0. The serial

number can be found on a decal attached to the tread-

mill (see the front cover of this manual for the location).

Before reading further, please familiarize yourself with

the parts that are labelled in the drawing below.

BEFORE YOU BEGIN

Handrail

Storage Latch

Console

Key/Clip

Circuit Breaker

Incline Leg

Walking Belt

Hood

Wheel

Foot Rail

Rear Roller

Adjustment Bolts

Water Bottle Holder

(No water bottle is included)

RIGHT SIDE

LEFT SIDE

On/Off Switch

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Donot

remove the long wire inside of the right handrail yet. In addition, do not dispose of the packing materials

until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance

lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the

shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply

wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own phillips screwdriver , adjustable

spanner , and wire cutters .

Note: To identify small parts used during assembly, see the PART IDENTIFICATION CHART in the center of

this manual. Some parts may be preassembled.

1. Attach the six Base Pads (19) to the bottom of the Base

(71) with six Base Pad Screws (42).

2. Have a second person hold the Base (71) in the position

shown.

Identify the Right Handrail (6), which has a large hole near

the lower end. Hold the Right Handrail so the bend is in

the position shown. Attach the Right Handrail to the

Base (71) with two Handrail Bolts (12), Handrail Washers

(30), and Nuts (17). Do not tighten the Handrail Bolts

yet.

Attach the Left Handrail (7) to the Base (71) in the same

way.

71 42

42 19

Large

Hole

Bend

5. Hold the Console Base (1) near the Right Handrail (6).

Touch the Right Handrail to discharge any static.

Insert the end of the Wire Harness (22) through the three

looped plastic ties. Next, press the end of the Wire

Harness into the connector on the back of the Console

Base (1) in the location shown. The end of the Wire

Harness should slide easily into the connector and

snap into place. If it does not, turn the end of the Wire

Harness and then insert it. IF THE CONNECTORS ARE

NOT CONNECTED PROPERLY, THE CONSOLE MAY

BE DAMAGED WHEN THE POWER IS TURNED ON.

Plastic

Ties

Connector

4. Have a second person lift and hold the front end of the

Frame (55). Hold a Frame Spacer (13) between the Right

Handrail (6) and the Frame. Attach the Right Handrail to

the Frame with a Frame Bolt (10), a Handrail Washer

(30), and a Handrail Star Washer (60).

Repeat this step on the left side of the treadmill.

Disconnect and discard the wire tie (see step 3).

3. With the help of a second person, raise the Handrails

(6, 7) so the Base (71) is flat on the floor.

Attach the Wheels (15) to the inner sides of the Base

(71) with two Wheel Bolts (14) and two Nuts (17). Donot

overtighten the Nuts; the Wheels should turn freely.

Position the treadmill Frame (55) between the Handrails

(6, 7) as shown. See the inset drawing. Locate the wire

tie in the lower end of the Right Handrail (6). Tie the wire

tie securely to the connector on the end of the Wire

Harness (22). Next, pull the opposite end of the wire tie

until the Wire Harness is routed through the Right

Handrail. Secure the Wire Harness to the upper end of

the Right Upright so that it will not fall inside. Then, dis-

connect and discard the wire tie.

22 6

Tie

9. Make sure that all parts are properly tightened before

you use the treadmill. Keep the included hex key in a

secure place; the hex key is used to adjust the walking

belt (see page 14). To protect the floor or carpet, place a

mat under the treadmill.

8. Carefully lower the Handrails (6, 7) to the floor. Center the

Frame (55) between the Handrails, and tighten the four

Handrail Bolts (12). Then, raise the Handrails to the verti-

cal position.

See the inset drawing. Attach the Latch Assembly (41) to

the Left Handrail (7) with two 16mm Screws (87). Make

sure that the Latch Assembly is oriented as shown.

See HOW TO CHANGE THE INCLINE OF THE TREAD-

MILL on page 11.Adjust the Incline Legs (63) to the de-

sired position, and fully insert the Incline Pins (64).

7. Attach the Console Back (4) to the Console (1) with four

16mm Screws (87). Note that there is a slot in the side of

the Console Back for the Wire Harness (22). Make sure

that no wires are pinched.

Slot

6. Set the Console (1) on the Right Handrail (6) and the Left

Handrail (not shown). Start four Console Screws (70)

(only two are shown) into the Console. After you have

started all four Console Screws, tighten them.

Insert the excess Wire Harness (22) down into the Right

Handrail (6). Tighten the three plastic ties around the Wire

Harness, and then cut off the ends of the plastic ties.

Plastic

Ties

6, 7

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili-

cone spray or other substances to the walking belt or the walking platform. Such substances will deterio-

rate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break

down, earthing provides a path of least resistance for electric cur-

rent to reduce the risk of electric shock. This product is equipped

with a power cord having an equipment-earthing conductor and an

earthing plug. Important: If the power cord is damaged, it must

be replaced with a manufacturer-recommended power cord.

See drawing 1. Plug the indicated end of the power cord into the

socket on the treadmill.

See drawing 2. Plug the power cord into an appropriate outlet that is

properly installed and earthed in accordance with all local codes and

ordinances. Note: Your power cord and outlet may appear different.

Important: The treadmill is not compatible with GFCI-equipped

outlets.

Socket on Treadmill

Outlet

DANGER: Improper connection of the equipment-earthing conductor can result in an in-

creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as

to whether the product is properly earthed. Do not modify the plug provided with the product—if it will

not fit the outlet, have a proper outlet installed by a qualified electrician.

Power

Cord

DIAGRAM OF THE CONSOLE

ETWL17105

(WLTL17105

Clip

Key

Note: If there is a sheet of clear plastic

on the console, remove the plastic.

STEP-BY-STEP CONSOLE OPERATION

Before operating the con-

sole, make sure that the

power cord is properly

plugged in (see page 9).

Next, locate the on/off switch

on the treadmill frame near

the power cord. Make sure

that the on/off switch is in the reset position.

Next, stand on the foot rails of the treadmill. Find the

clip attached to the key (see the drawing above), and

slide the clip securely onto the waistband of your

clothes. Then, insert the key fully into the console.

After a moment, the display will light. Important: In an

emergency situation, the key can be pulled from

the console, causing the walking belt to slow to a

stop. Test the clip by carefully taking a few steps

backward; if the key is not pulled from the console,

adjust the position of the clip.

Follow the steps below to operate the console.

Insert the key fully into the console.

Amoment after the key is inserted, the display will

light.

Press the Digital Speed increase button to start

the walking belt.

Amoment after the button is pressed, the walking

belt will begin to move at 1 mph. Hold the handrails

and begin walking. As you exercise, change the

speed of the walking belt as desired by pressing

the Digital Speed buttons. Each time a button is

pressed, the speed setting will change by 0.1

mph; if a button is held down, the speed setting

will change in increments of 0.5 mph.

CAUTION: Before operating the

console, read the following precautions.

• Do not stand on the walking belt when turn-

ing on the power.

• Always wear the clip (see the drawing

above) while operating the treadmill.

• Adjust the speed in small increments to

avoid sudden jumps in speed.

• To reduce the possibility of electric shock,

keep the console dry. Avoid spilling liquids

on the console and place only sealed water

bottles in the water bottle holders.

Reset

Andere Handbücher für Cadence 45 Treadmill

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence C6 Treadmill Bedienungsanleitung

Weslo

Weslo WLTL22191 Bedienungsanleitung

Weslo

Weslo Crosswalk 5.0t Bedienungsanleitung

Weslo

Weslo Cadence Sl30 Bedienungsanleitung

Weslo

Weslo Cadence 915 Kurzanleitung

Weslo

Weslo Cadence 16.0 Cwl Treadmill Kurzanleitung

Weslo

Weslo Cadence4.8 Treadmill Bedienungsanleitung

Weslo

Weslo Crosswalk 5.2t Treadmill Bedienungsanleitung

Weslo

Weslo WETL91070 Bedienungsanleitung

Weslo

Weslo Lyne 3500 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 6.0 Treadmill Bedienungsanleitung

Weslo

Weslo Pro Crosswalk 7.8 Treadmill Bedienungsanleitung

Weslo

Weslo Cardio Stride 2.0 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 1015 Bedienungsanleitung

Weslo

Weslo Cadence 450v Treadmill Kurzanleitung

Weslo

Weslo Cadence Ts5 Bedienungsanleitung

Weslo

Weslo Lyne 3500 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 21.5 Treadmill Benutzerhandbuch

Weslo

Weslo 330i Treadmill Bedienungsanleitung

Weslo

Weslo 10pi Bedienungsanleitung

Weslo

Weslo WLTL41582 Bedienungsanleitung

Weslo

Weslo Cadence 500 Treadmill Bedienungsanleitung

Weslo

Weslo Relay Relay 660 Bedienungsanleitung

Weslo

Weslo Cadence 85 Benutzerhandbuch

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung